# This file is part of the GHC build system.
#
# To understand how the build system works and how to modify it, see
-# http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
-# http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
+# http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
+# http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
#
# -----------------------------------------------------------------------------
+# Eliminate use of the built-in implicit rules, and clear out the default list
+# of suffixes for suffix rules. Speeds up make quite a bit. Both are needed
+# for the shortest `make -d` output.
+# Don't set --no-builtin-variables; some rules might stop working if you do
+# (e.g. 'make clean' in testsuite/ currently relies on an implicit $RM).
+MAKEFLAGS += --no-builtin-rules
+.SUFFIXES:
+
+
+# -----------------------------------------------------------------------------
+# Sanitize environment
+
+# See Trac #11530
+export GREP_OPTIONS :=
+
+ifneq "$(filter maintainer-clean distclean clean clean_% help,$(MAKECMDGOALS))" ""
+-include mk/config.mk
+else
+include mk/config.mk
+ifeq "$(ProjectVersion)" ""
+$(error Please run ./configure first)
+endif
+endif
+
+include mk/custom-settings.mk
+
+
ifeq "$(wildcard distrib/)" ""
# We're in a bindist
.PHONY: install show
install show:
- $(MAKE) -r --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES
+ $(MAKE) --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES
+
+# Note [install-strip]
+#
+# install-strip is like install, but it strips the executable files while
+# installing them.
+#
+# From http://www.gnu.org/prep/standards/html_node/Standard-Targets.html:
+#
+# "install-strip should not strip the executables in the build directory
+# which are being copied for installation. It should only strip the copies
+# that are installed. "
+
+.PHONY: install-strip
+install-strip:
+ # See Note [install-strip].
+ $(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install BINDIST=YES NO_INCLUDE_DEPS=YES
else
+.PHONY: default
default : all
@:
# For help, type 'make help'
.PHONY: help
-help :
- @cat MAKEHELP
-
-ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
--include mk/config.mk
-else
-include mk/config.mk
-ifeq "$(ProjectVersion)" ""
-$(error Please run ./configure first)
-endif
-endif
-
-include mk/custom-settings.mk
+help:
+ @cat MAKEHELP.md
# No need to update makefiles for these targets:
-REALGOALS=$(filter-out binary-dist binary-dist-prep bootstrapping-files framework-pkg clean clean_% distclean maintainer-clean show help test fulltest,$(MAKECMDGOALS))
+# (the ones we're filtering out)
+REALGOALS=$(filter-out \
+ binary-dist \
+ binary-dist-prep \
+ install-strip \
+ sdist sdist-ghc \
+ sdist-ghc-prep \
+ sdist-windows-tarballs \
+ sdist-windows-tarballs-prep \
+ sdist-testsuite \
+ sdist-testsuite-prep \
+ bootstrapping-files \
+ framework-pkg \
+ clean \
+ clean_% \
+ distclean \
+ maintainer-clean \
+ show \
+ show! \
+ echo \
+ help \
+ test \
+ fulltest \
+ slowtest \
+ fasttest \
+ ,$(MAKECMDGOALS))
# configure touches certain files even if they haven't changed. This
# can mean a lot of unnecessary recompilation after a re-configure, so
# NB. not the same as saying '%: ...', which doesn't do the right thing:
# it does nothing if we specify a target that already exists.
-.PHONY: $(REALGOALS)
+.PHONY: $(REALGOALS) all
$(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old
ifneq "$(OMIT_PHASE_0)" "YES"
@echo "===--- building phase 0"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=0 phase_0_builds
+ $(MAKE) --no-print-directory -f ghc.mk phase=0 phase_0_builds
endif
ifneq "$(OMIT_PHASE_1)" "YES"
@echo "===--- building phase 1"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=1 phase_1_builds
+ $(MAKE) --no-print-directory -f ghc.mk phase=1 phase_1_builds
endif
@echo "===--- building final phase"
- $(MAKE) -r --no-print-directory -f ghc.mk phase=final $@
+ $(MAKE) --no-print-directory -f ghc.mk phase=final $@
+# if BINARY_DIST_DIR is not set, assume we want the old
+# behaviour of placing the binary dist into the current
+# directory. Provide BINARY_DIST_DIR to put the final
+# binary distribution elsewhere.
+BINARY_DIST_DIR ?= .
+
+.PHONY: binary-dist
binary-dist: binary-dist-prep
-ifeq "$(mingw32_TARGET_OS)" "1"
- mv bindistprep/*.exe .
-endif
- mv bindistprep/*.tar.bz2 .
+ mv bindistprep/*.tar.$(TAR_COMP_EXT) "$(BINARY_DIST_DIR)"
+.PHONY: binary-dist-prep
binary-dist-prep:
ifeq "$(mingw32_TARGET_OS)" "1"
- $(MAKE) -r --no-print-directory -f ghc.mk windows-binary-dist-prep
- $(MAKE) -r --no-print-directory -f ghc.mk windows-installer
+ $(MAKE) --no-print-directory -f ghc.mk windows-binary-dist-prep
else
rm -f bindist-list
- $(MAKE) -r --no-print-directory -f ghc.mk bindist BINDIST=YES
- $(MAKE) -r --no-print-directory -f ghc.mk unix-binary-dist-prep
+ $(MAKE) --no-print-directory -f ghc.mk bindist-list BINDIST=YES
+ $(MAKE) --no-print-directory -f ghc.mk unix-binary-dist-prep
endif
+.PHONY: install-strip
+install-strip:
+ # See Note [install-strip].
+ $(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
+
+.PHONY: sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep
+# Just running `./boot && ./configure && make sdist` should work, so skip
+# phase 0 and 1 and don't build any dependency files.
+sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep :
+ $(MAKE) --no-print-directory -f ghc.mk $@ NO_INCLUDE_DEPS=YES NO_INCLUDE_PKGDATA=YES
+
+.PHONY: clean distclean maintainer-clean
clean distclean maintainer-clean:
- $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES
+ $(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES
test ! -d testsuite || $(MAKE) -C testsuite $@
+.PHONY: $(filter clean_%,$(MAKECMDGOALS))
$(filter clean_%, $(MAKECMDGOALS)) : clean_% :
- $(MAKE) -r --no-print-directory -f ghc.mk $@ CLEANING=YES
+ $(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES
+
+.PHONY: bootstrapping-files show echo
+bootstrapping-files show echo:
+ $(MAKE) --no-print-directory -f ghc.mk $@
-bootstrapping-files show:
- $(MAKE) -r --no-print-directory -f ghc.mk $@
+.PHONY: show!
+show!:
+ $(MAKE) --no-print-directory -f ghc.mk show NO_INCLUDE_PKGDATA=YES
ifeq "$(darwin_TARGET_OS)" "1"
+.PHONY: framework-pkg
framework-pkg:
$(MAKE) -C distrib/MacOS $@
endif
endif
+# Note [validate and testsuite speed]
+#
+# There are 3 different validate and testsuite speed settings:
+# fast, normal and slow.
+#
+# how how used
+# cd tests config. many many by
+# validate && make speed= tests ways whom
+# =============================================================================
+# --fast fast 2 some 1+exs Travis (to stay within time limit)
+# --normal test 1 all 1+exs Phabricator (slow takes too long?)
+# --slow slow 0 all all Nightly (slow is ok)
+#
+# accept 1 all 1
+#
+# `--fast` and `--normal` run one default way, as well as any other ways which
+# are explicitly requested by the test using extra_ways().
+#
+# `make accept` should run all tests exactly once. There is no point in
+# accepting a test for multiple ways, since it should produce the same output
+# for all ways.
+#
+# To make sure all .stderr and .stdout files in the testsuite are never
+# out-of-date, it is useful if Phabricator, via a normal `./validate` and `make
+# test`, runs each test at least once.
+.PHONY: fasttest
+fasttest:
+ $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt fast
+
.PHONY: test
test:
- $(MAKE) -C testsuite/tests CLEANUP=1 OUTPUT_SUMMARY=../../testsuite_summary.txt fast
-
-.PHONY: fulltest
-fulltest:
- $(MAKE) -C testsuite/tests CLEANUP=1 OUTPUT_SUMMARY=../../testsuite_summary.txt
+ $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt
+.PHONY: slowtest fulltest
+slowtest fulltest:
+ $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt slow
git.haskell.org / ghc.git / blobdiff