Update the test in Makefile that we have all the boot libs
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
42 # installer package
43 #
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
47 #
48 # hc-file-bundle
49 # Builds an HC-file bundle, for bootstrapping
50 #
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
53 #
54 ############################################################################
55
56 TOP=.
57 include $(TOP)/mk/boilerplate.mk
58
59 #
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
62 #
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
65 #
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
67
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = includes compiler docs utils driver
71 else
72 SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc
73 endif
74
75 SUBDIRS = gmp libffi includes utils driver docs rts compiler ghc libraries libraries/Cabal/doc
76
77 check-all: check-tools check-packages
78
79 check-tools:
80 @:
81 ifeq "$(HADDOCK_DOCS)" "YES"
82 ifeq "$(HADDOCK)" ""
83 echo "Couldn't find haddock" >&2
84 exit 1
85 endif
86 endif
87
88 # Sanity check that all the boot libraries are in the tree, to catch
89 # failure to run darcs-all.
90 check-packages :
91 @ds=`grep "^[^# ][^ ]* *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\
92 for d in $$ds; do \
93 if test ! -d $$d; then \
94 echo "Looks like you're missing $$d,"; \
95 echo "maybe you haven't done './darcs-all get'?"; \
96 exit 1; \
97 fi \
98 done
99 @if test ! -f libraries/base/configure; then \
100 echo "Looks like you're missing base's configure script."; \
101 echo "Did you run 'sh boot' at the top level?"; \
102 exit 1; \
103 fi
104
105 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
106 ifneq "$(WhatGccIsCalled)" ""
107 GCC_LIB_DEP = stamp.inplace-gcc-lib
108 endif
109 endif
110
111 stage1 : $(GCC_LIB_DEP) check-all
112 $(MAKE) -C libraries boot
113 $(MAKE) -C gmp all
114 $(MAKE) -C libffi all
115 $(MAKE) -C utils/mkdependC boot
116 $(MAKE) -C utils with-bootstrapping-compiler
117 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
118 for i in $(SUBDIRS_BUILD); do \
119 echo "------------------------------------------------------------------------"; \
120 echo "== $(MAKE) boot $(MFLAGS);"; \
121 echo " in $(shell pwd)/$$i"; \
122 echo "------------------------------------------------------------------------"; \
123 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
124 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
125 done; \
126 for i in $(SUBDIRS_BUILD); do \
127 echo "------------------------------------------------------------------------"; \
128 echo "== $(MAKE) all $(MFLAGS);"; \
129 echo " in $(shell pwd)/$$i"; \
130 echo "------------------------------------------------------------------------"; \
131 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
132 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
133 done
134 $(MAKE) -C ghc stage=1 boot
135 $(MAKE) -C ghc stage=1
136 $(MAKE) -C rts boot
137 $(MAKE) -C rts
138 $(MAKE) -C libraries all
139 $(MAKE) -C utils with-stage-1
140
141 # When making distributions (i.e., whether with binary-dist or using the
142 # vanilla install target to create an installer package), we can have problems
143 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
144 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
145 # an example. Thus, we explicitly build a second version with the stage 1
146 # compiler of all utils that get installed and of all extra support binaries
147 # includes in binary dists.
148 stage2 : check-all
149 $(MAKE) -C compiler stage=2 boot
150 $(MAKE) -C compiler stage=2
151 ifeq "$(HADDOCK_DOCS)" "YES"
152 $(MAKE) -C compiler stage=2 doc
153 endif
154 $(MAKE) -C ghc stage=2 boot
155 $(MAKE) -C ghc stage=2
156
157 stage3 : check-all
158 $(MAKE) -C compiler stage=3 boot
159 $(MAKE) -C compiler stage=3
160 $(MAKE) -C ghc stage=3 boot
161 $(MAKE) -C ghc stage=3
162
163 bootstrap : bootstrap2
164
165 bootstrap2 : stage1
166 $(MAKE) stage2
167
168 bootstrap3 : bootstrap2
169 $(MAKE) stage3
170
171 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
172 ifneq "$(WhatGccIsCalled)" ""
173 all :: stamp.inplace-gcc-lib
174
175 .PHONY: stamp.inplace-gcc-lib
176
177 # This is a hack to make Cabal able to find ld when we run tests with
178 # the inplace ghc. We should probably install all the gcc stuff in our
179 # tree somewhere, and then have install copy it from there rather than
180 # from the filesystem.
181 stamp.inplace-gcc-lib:
182 $(RM) -r ghc/gcc-lib
183 mkdir ghc/gcc-lib
184 cp $(LD) ghc/gcc-lib
185 touch $@
186
187 clean ::
188 $(RM) -r ghc/gcc-lib
189 $(RM) -f inplace-gcc-lib
190 endif
191 endif
192
193 all :: bootstrap
194
195 # -----------------------------------------------------------------------------
196 # Installing
197
198 # We want to install the stage 2 bootstrapped compiler by default, but we let
199 # the user override this by saying 'make install stage=1', for example.
200 ifeq "$(stage)" ""
201 INSTALL_STAGE = stage=2
202 else
203 INSTALL_STAGE =
204 endif
205
206 install-strip:
207 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
208
209 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
210 install :: check-packages
211 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
212 for i in $(SUBDIRS); do \
213 echo "------------------------------------------------------------------------"; \
214 echo "== $(MAKE) $@ $(MFLAGS);"; \
215 echo " in $(shell pwd)/$$i"; \
216 echo "------------------------------------------------------------------------"; \
217 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
218 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
219 done
220
221 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
222 # These files need to be in the InstallShield
223 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
224 # in the top-level directory of the distribution
225 INSTALL_DATAS += ANNOUNCE LICENSE README
226 endif
227
228 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
229 # and the perl interpreter and dll into the GHC prefix directory.
230 # Gcc and Perl source locations derived from configuration data.
231 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
232 ifneq "$(WhatGccIsCalled)" ""
233 install ::
234 -mkdir $(prefix)/gcc-lib
235 -mkdir $(prefix)/include
236 -mkdir $(prefix)/include/mingw
237 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
238 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
239 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
240 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
241 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
242 -cp $(GccDir)gcc.exe $(prefix)
243 -cp $(GccDir)as.exe $(prefix)/gcc-lib
244 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
245 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
246 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
247 -cp $(GhcDir)../perl.exe $(prefix)
248 -cp $(GhcDir)../perl56.dll $(prefix)
249 endif
250 endif
251
252 # Install gcc-extra-opts
253 install ::
254 $(INSTALL_DIR) $(DESTDIR)$(libdir)
255 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
256
257 install-docs ::
258 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
259 for i in $(SUBDIRS); do \
260 echo "------------------------------------------------------------------------"; \
261 echo "== $(MAKE) $@ $(MFLAGS);"; \
262 echo " in $(shell pwd)/$$i"; \
263 echo "------------------------------------------------------------------------"; \
264 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
265 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
266 done
267
268 # -----------------------------------------------------------------------------
269 # Making a binary distribution
270 #
271 # `dist' `binary-dist'
272 # Create a distribution tar file for this program. The tar file
273 # should be set up so that the file names in the tar file start with
274 # a subdirectory name which is the name of the package it is a
275 # distribution for. This name can include the version number.
276 #
277 # For example, the distribution tar file of GCC version 1.40 unpacks
278 # into a subdirectory named `gcc-1.40'.
279 #
280 # The easiest way to do this is to create a subdirectory
281 # appropriately named, use ln or cp to install the proper files in
282 # it, and then tar that subdirectory.
283 #
284 # The dist target should explicitly depend on all non-source files
285 # that are in the distribution, to make sure they are up to date in
286 # the distribution. See Making Releases.
287 #
288 # binary-dist is a GHC addition for binary distributions
289 #
290
291 binary-dist::
292 -rm -rf $(BIN_DIST_DIR)
293 -$(RM) $(BIN_DIST_TARBALL)
294
295 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
296
297 binary-dist::
298 $(MAKE) prefix=$(BIN_DIST_DIR) install
299 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
300
301 binary-dist::
302 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
303
304 binary-dist::
305 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
306 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
307
308 else
309
310 BinDistDirs = includes compiler docs rts
311
312 BIN_DIST_TOP= distrib/Makefile \
313 distrib/configure-bin.ac \
314 distrib/INSTALL \
315 distrib/README \
316 ANNOUNCE \
317 LICENSE \
318 install-sh \
319 extra-gcc-opts.in \
320 config.guess \
321 config.sub \
322 aclocal.m4
323
324 ifeq "$(darwin_TARGET_OS)" "1"
325 BIN_DIST_TOP+=mk/fix_install_names.sh
326 endif
327
328 .PHONY: binary-dist-pre% binary-dist
329
330 binary-dist:: binary-dist-pre
331
332 binary-dist-pre::
333 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
334 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
335 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
336 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
337 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
338 cp mk/package.mk $(BIN_DIST_DIR)/mk/
339 cp mk/install.mk $(BIN_DIST_DIR)/mk/
340 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
341 cp mk/fptools.css $(BIN_DIST_DIR)/mk/
342 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
343 $(MKDIRHIER) $(BIN_DIST_DIR)/share
344
345 binary-dist::
346 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
347 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
348 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
349 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
350 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
351 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
352 $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
353 $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
354 $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
355
356 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
357
358 binary-dist::
359 @for i in $(BIN_DIST_TOP); do \
360 if test -f "$$i"; then \
361 echo cp $$i $(BIN_DIST_DIR); \
362 cp $$i $(BIN_DIST_DIR); \
363 fi; \
364 done;
365 @echo "Configuring the Makefile for this project..."
366 echo > $(VARFILE)
367 echo "package = ghc" >> $(VARFILE)
368 echo "version = $(ProjectVersion)" >> $(VARFILE)
369 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
370 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
371 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
372 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
373 echo "GhcHasEditline = $(GhcHasEditline)" >> $(VARFILE)
374 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
375 echo "XMLDocWays = $(XMLDocWays)" >> $(VARFILE)
376 # We won't actually use xsltproc, but we need to know if it's "" or not
377 echo "XSLTPROC = $(XSLTPROC)" >> $(VARFILE)
378 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(VARFILE)
379 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(VARFILE)
380
381 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
382 @echo "Generating a shippable configure script.."
383 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
384 ( cd $(BIN_DIST_DIR); autoreconf )
385 endif
386
387 # Tar up the distribution and build a manifest
388 binary-dist :: tar-binary-dist
389
390 .PHONY: tar-binary-dist
391 tar-binary-dist:
392 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
393 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
394
395 PUBLISH_FILES = $(BIN_DIST_TARBALL)
396
397 # Upload the distribution and documentation
398 ifneq "$(ISCC)" ""
399 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
400 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
401
402 PUBLISH_FILES += $(WINDOWS_INSTALLER)
403
404 binary-dist :: generate-windows-installer
405
406 .PHONY: generate-windows-installer
407 generate-windows-installer ::
408 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
409 endif
410
411 # Upload the distribution and documentation
412 ifneq "$(PublishLocation)" ""
413 publish ::
414 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
415 endif
416
417 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
418
419 .PHONY: publish-binary-dist
420 publish-binary-dist ::
421 @for f in $(PUBLISH_FILES); \
422 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
423 done
424
425 # You need to "make binddisttest" before publishing the docs, as it
426 # works by publish setting $(prefix) to inside the binddisttest
427 # directory so $(docdir) points to the right place.
428
429 # We assume that Windows means Cygwin, as we can't just use docdir
430 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
431 # the machine c.
432
433 ifeq "$(Windows)" "YES"
434 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
435 else
436 PUBLISH_DOCDIR = $(docdir)
437 endif
438
439 publish-binary-dist ::
440 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
441
442 binary-dist::
443 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
444
445 # -----------------------------------------------------------------------------
446 # Building MacOS installer packages
447 #
448 # 'framework-pkg'
449 # Create an installer package for /Library/Frameworks/GHC.framework
450 #
451 # 'framework-binary-dist'
452 # Create an installer package for GHC.framework encapsulating a
453 # binary-dist to make it relocatable
454 # FIXME: This is only partially implemented so far
455
456 ifeq "$(darwin_TARGET_OS)" "1"
457
458 .PHONY: framework-pkg, framework-binary-dist
459
460 framework-pkg:
461 $(MAKE) -C distrib/MacOS framework-pkg
462
463 framework-binary-dist:
464 $(MAKE) -C distrib/MacOS framework-binary-dist
465
466 endif
467
468 # -----------------------------------------------------------------------------
469 # Building source distributions
470 #
471 # Do it like this:
472 #
473 # $ make
474 # $ make dist
475 #
476 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
477 #
478
479 .PHONY: dist
480
481 #
482 # Directory in which we're going to build the src dist
483 #
484 SRC_DIST_NAME=ghc-$(ProjectVersion)
485 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
486
487 #
488 # Files to include in source distributions
489 #
490 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
491 SRC_DIST_FILES += \
492 configure.ac config.guess config.sub configure \
493 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
494 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
495
496 # -----------------------------------------------------------------------------
497 # Source distributions
498
499 # A source dist is built from a complete build tree, because we
500 # require some extra files not contained in a darcs checkout: the
501 # output from Happy and Alex, for example.
502 #
503 # The steps performed by 'make dist' are as follows:
504 # - create a complete link-tree of the current build tree in /tmp
505 # - run 'make distclean' on that tree
506 # - remove a bunch of other files that we know shouldn't be in the dist
507 # - tar up first the extralibs package, then the main source package
508
509 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
510
511 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
512 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
513
514 VERSION :
515 echo $(ProjectVersion) >VERSION
516
517 dist :: VERSION
518
519 dist ::
520 $(RM) -rf $(SRC_DIST_DIR)
521 $(RM) $(SRC_DIST_NAME).tar.gz
522 mkdir $(SRC_DIST_DIR)
523 ( cd $(SRC_DIST_DIR) \
524 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
525 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
526 && $(MAKE) distclean \
527 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
528 && $(RM) -rf compiler/stage[123] mk/build.mk \
529 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
530 )
531 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
532 $(RM) -rf $(EXTRA_LIBS)
533 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
534
535 # Upload the distribution(s)
536 # Retrying is to work around buggy firewalls that corrupt large file transfers
537 # over SSH.
538 ifneq "$(PublishLocation)" ""
539 dist ::
540 @for i in 0 1 2 3 4 5 6 7 8 9; do \
541 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
542 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
543 done
544 @for i in 0 1 2 3 4 5 6 7 8 9; do \
545 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
546 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
547 done
548 endif
549
550 # -----------------------------------------------------------------------------
551 # HC file bundles
552
553 hc-file-bundle :
554 $(RM) -r ghc-$(ProjectVersion)
555 $(LN_S) . ghc-$(ProjectVersion)
556 $(FIND) ghc-$(ProjectVersion)/compiler \
557 ghc-$(ProjectVersion)/utils \
558 ghc-$(ProjectVersion)/libraries -follow \
559 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
560 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
561 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
562 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
563 fi; \
564 done;
565 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
566 if test "x$$f" != "x"; then \
567 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
568 fi; \
569 done;
570 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
571 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
572 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
573 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
574 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
575 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
576
577 # -----------------------------------------------------------------------------
578 # Cleaning
579
580 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
581
582 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
583 docs/users_guide/ug-book.xml extra-gcc-opts
584
585 # don't clean config.mk: it's needed when cleaning stuff later on
586 LATE_DIST_CLEAN_FILES += mk/config.mk
587
588 # VERSION is shipped in a source dist
589 MAINTAINER_CLEAN_FILES += VERSION
590
591 extraclean::
592 $(RM) -rf autom4te.cache
593
594 clean distclean ::
595 $(MAKE) -C bindisttest $@
596 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
597
598 # -----------------------------------------------------------------------------
599
600 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
601 NO_BOOT_TARGET=YES
602 NO_ALL_TARGET=YES
603 NO_INSTALL_TARGET=YES
604
605 include $(TOP)/mk/target.mk
606
607 # -----------------------------------------------------------------------------
608