patch from #1782; fixes check-packages target on Solaris
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # hc-file-bundle
41 # Builds an HC-file bundle, for bootstrapping
42 #
43 # clean, distclean, maintainer-clean
44 # Increasing levels of cleanliness
45 #
46 ############################################################################
47
48 TOP=.
49 include $(TOP)/mk/boilerplate.mk
50
51 #
52 # Order is important! It's e.g. necessary to descend into include/
53 # before the rest to have a config.h, etc.
54 #
55 # If we're booting from .hc files, swap the order
56 # we descend into subdirs - to boot utils must be before driver.
57 #
58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
59
60 # We can't 'make boot' in libraries until stage1 is built
61 ifeq "$(BootingFromHc)" "YES"
62 SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver
63 else
64 SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts
65 endif
66
67 SUBDIRS = gmp includes compat utils driver docs rts libraries compiler
68
69 # Sanity check that all the boot libraries are in the tree, to catch
70 # failure to run darcs-all.
71 check-packages :
72 @ds=`cat libraries/boot-packages`;\
73 for d in $$ds; do \
74 if test ! -d libraries/$$d; then \
75 echo "Looks like you're missing libraries/$$d,"; \
76 echo "maybe you haven't done './darcs-all get'?"; \
77 exit 1; \
78 fi \
79 done
80 @if test ! -f libraries/base/configure; then \
81 echo "Looks like you're missing base's configure script."; \
82 echo "Did you run 'sh boot' at the top level?"; \
83 exit 1; \
84 fi
85
86 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
87 ifneq "$(WhatGccIsCalled)" ""
88 GCC_LIB_DEP = stamp.inplace-gcc-lib
89 endif
90 endif
91
92 stage1 : $(GCC_LIB_DEP) check-packages
93 $(MAKE) -C utils/mkdependC boot
94 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
95 for i in $(SUBDIRS_BUILD); do \
96 echo "------------------------------------------------------------------------"; \
97 echo "== $(MAKE) boot $(MFLAGS);"; \
98 echo " in $(shell pwd)/$$i"; \
99 echo "------------------------------------------------------------------------"; \
100 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
101 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
102 done; \
103 for i in $(SUBDIRS_BUILD); do \
104 echo "------------------------------------------------------------------------"; \
105 echo "== $(MAKE) all $(MFLAGS);"; \
106 echo " in $(shell pwd)/$$i"; \
107 echo "------------------------------------------------------------------------"; \
108 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
109 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
110 done
111 $(MAKE) -C libraries boot
112 $(MAKE) -C libraries all
113
114 stage2 : check-packages
115 $(MAKE) -C compiler boot stage=2
116 $(MAKE) -C compiler stage=2
117
118 stage3 : check-packages
119 $(MAKE) -C compiler boot stage=3
120 $(MAKE) -C compiler stage=3
121
122 bootstrap : bootstrap2
123
124 bootstrap2 : stage1
125 $(MAKE) stage2
126
127 bootstrap3 : bootstrap2
128 $(MAKE) stage3
129
130 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
131 ifneq "$(WhatGccIsCalled)" ""
132 all :: stamp.inplace-gcc-lib
133
134 .PHONY: stamp.inplace-gcc-lib
135
136 # This is a hack to make Cabal able to find ld when we run tests with
137 # the inplace ghc. We should probably install all the gcc stuff in our
138 # tree somewhere, and then have install copy it from there rather than
139 # from the filesystem.
140 stamp.inplace-gcc-lib:
141 $(RM) -r compiler/gcc-lib
142 mkdir compiler/gcc-lib
143 cp $(LD) compiler/gcc-lib
144 touch $@
145
146 clean ::
147 $(RM) -r compiler/gcc-lib
148 $(RM) -f inplace-gcc-lib
149 endif
150 endif
151
152 all :: bootstrap
153
154 # -----------------------------------------------------------------------------
155 # Installing
156
157 # We want to install the stage 2 bootstrapped compiler by default, but we let
158 # the user override this by saying 'make install stage=1', for example.
159 ifeq "$(stage)" ""
160 INSTALL_STAGE = stage=2
161 else
162 INSTALL_STAGE =
163 endif
164
165 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
166 install :: check-packages
167 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
168 for i in $(SUBDIRS); do \
169 echo "------------------------------------------------------------------------"; \
170 echo "== $(MAKE) $@ $(MFLAGS);"; \
171 echo " in $(shell pwd)/$$i"; \
172 echo "------------------------------------------------------------------------"; \
173 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
174 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
175 done
176
177 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
178 # These files need to be in the InstallShield
179 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
180 # in the top-level directory of the distribution
181 INSTALL_DATAS += ANNOUNCE LICENSE README
182 endif
183
184 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
185 # and the perl interpreter and dll into the GHC prefix directory.
186 # Gcc and Perl source locations derived from configuration data.
187 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
188 ifneq "$(WhatGccIsCalled)" ""
189 install ::
190 -mkdir $(prefix)/gcc-lib
191 -mkdir $(prefix)/include
192 -mkdir $(prefix)/include/mingw
193 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
194 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
195 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
196 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
197 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
198 -cp $(GccDir)gcc.exe $(prefix)
199 -cp $(GccDir)as.exe $(prefix)/gcc-lib
200 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
201 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
202 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
203 -cp $(GhcDir)../perl.exe $(prefix)
204 -cp $(GhcDir)../perl56.dll $(prefix)
205 endif
206 endif
207
208 # Install gcc-extra-opts
209 install ::
210 $(INSTALL_DIR) $(DESTDIR)$(libdir)
211 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
212
213 install-docs ::
214 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
215 for i in $(SUBDIRS); do \
216 echo "------------------------------------------------------------------------"; \
217 echo "== $(MAKE) $@ $(MFLAGS);"; \
218 echo " in $(shell pwd)/$$i"; \
219 echo "------------------------------------------------------------------------"; \
220 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
221 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
222 done
223
224 # -----------------------------------------------------------------------------
225 # Making a binary distribution
226 #
227 # `dist' `binary-dist'
228 # Create a distribution tar file for this program. The tar file
229 # should be set up so that the file names in the tar file start with
230 # a subdirectory name which is the name of the package it is a
231 # distribution for. This name can include the version number.
232 #
233 # For example, the distribution tar file of GCC version 1.40 unpacks
234 # into a subdirectory named `gcc-1.40'.
235 #
236 # The easiest way to do this is to create a subdirectory
237 # appropriately named, use ln or cp to install the proper files in
238 # it, and then tar that subdirectory.
239 #
240 # The dist target should explicitly depend on all non-source files
241 # that are in the distribution, to make sure they are up to date in
242 # the distribution. See Making Releases.
243 #
244 # binary-dist is a GHC addition for binary distributions
245 #
246
247 binary-dist::
248 -rm -rf $(BIN_DIST_DIR)
249 -$(RM) $(BIN_DIST_DIR).tar.gz
250
251 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
252
253 binary-dist::
254 $(MAKE) prefix=$(BIN_DIST_DIR) install
255
256 binary-dist::
257 cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
258
259 binary-dist::
260 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
261 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
262
263 else
264
265 BinDistDirs = includes compiler docs rts
266
267 BIN_DIST_TOP= distrib/Makefile \
268 distrib/configure-bin.ac \
269 distrib/INSTALL \
270 distrib/README \
271 ANNOUNCE \
272 LICENSE \
273 install-sh \
274 extra-gcc-opts.in \
275 config.guess \
276 config.sub \
277 aclocal.m4
278
279 ifeq "$(darwin_TARGET_OS)" "1"
280 BIN_DIST_TOP+=mk/fix_install_names.sh
281 endif
282
283 .PHONY: binary-dist-pre% binary-dist binary-pack
284
285 binary-dist:: binary-dist-pre
286
287 binary-dist-pre::
288 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
289 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
290 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
291 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
292 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
293 echo '' > $(BIN_DIST_DIR)/mk/compat.mk
294 cp mk/package.mk $(BIN_DIST_DIR)/mk/
295 cp mk/install.mk $(BIN_DIST_DIR)/mk/
296 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
297 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
298 $(MKDIRHIER) $(BIN_DIST_DIR)/share
299
300 binary-dist::
301 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
302 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
303 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
304 # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
305 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
306 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
307 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
308
309 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
310
311 binary-dist::
312 @for i in $(BIN_DIST_TOP); do \
313 if test -f "$$i"; then \
314 echo cp $$i $(BIN_DIST_DIR); \
315 cp $$i $(BIN_DIST_DIR); \
316 fi; \
317 done;
318 @echo "Configuring the Makefile for this project..."
319 echo > $(VARFILE)
320 echo "package = ghc" >> $(VARFILE)
321 echo "version = $(ProjectVersion)" >> $(VARFILE)
322 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
323 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
324 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
325 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
326 echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
327 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
328 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
329 @echo "Generating a shippable configure script.."
330 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
331 ( cd $(BIN_DIST_DIR); autoreconf )
332
333 #
334 # binary dist'ing the documentation.
335 # The default documentation to build/install is given below; overrideable
336 # via build.mk or the 'make' command-line.
337 #
338 # If BINDIST_DOC_WAYS is set, use that
339 # If XMLDocWays is set, use that
340 # Otherwise, figure out what we can build based on configure results
341
342 ifndef BINDIST_DOC_WAYS
343
344 ifneq "$(XMLDocWays)" ""
345 BINDIST_DOC_WAYS = $(XMLDocWays)
346 else
347 ifneq "$(XSLTPROC)" ""
348 BINDIST_DOC_WAYS = html
349 ifneq "$(FOP)" ""
350 BINDIST_DOC_WAYS += ps pdf
351 else
352 ifneq "$(PDFXMLTEX)" ""
353 BINDIST_DOC_WAYS += pdf
354 endif
355 ifneq "$(XMLTEX)" ""
356 ifneq "$(DVIPS)" ""
357 BINDIST_DOC_WAYS += ps
358 endif # DVIPS
359 endif # XMLTEX
360 endif # FOP
361 endif # XSLTPROC
362 endif # XMLDocWays
363
364 endif # BINDIST_DOC_WAYS
365
366 ifneq "$(DIR_DOCBOOK_XSL)" ""
367 .PHONY: binary-dist-doc-%
368
369 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
370
371 binary-dist :: $(BINARY_DIST_DOC_RULES)
372
373 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
374 $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
375 $(MAKE) -C $* $(MFLAGS) install-docs \
376 MAKING_BIN_DIST=1 \
377 XMLDocWays="$(BINDIST_DOC_WAYS)" \
378 prefix=$(BIN_DIST_DIR) \
379 exec_prefix=$(BIN_DIST_DIR) \
380 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
381 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
382 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
383 datadir=$(BIN_DIST_DIR)/share
384 endif
385
386 .PHONY: binary-dist-doc-%
387
388 binary-dist::
389 $(MAKE) -C libraries binary-dist
390
391 endif
392
393 # Tar up the distribution and build a manifest
394 binary-dist :: tar-binary-dist
395
396 .PHONY: tar-binary-dist
397 tar-binary-dist:
398 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
399 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
400
401 PUBLISH_FILES = $(BIN_DIST_TARBALL)
402
403 # Upload the distribution and documentation
404 ifneq "$(ISCC)" ""
405 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
406 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
407
408 PUBLISH_FILES += $(WINDOWS_INSTALLER)
409
410 binary-dist :: generate-windows-installer
411
412 .PHONY: generate-windows-installer
413 generate-windows-installer ::
414 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
415 endif
416
417 # Upload the distribution and documentation
418 ifneq "$(PublishLocation)" ""
419 publish :: publish-binary-dist
420 endif
421
422 .PHONY: publish-binary-dist
423 publish-binary-dist ::
424 @for f in $(PUBLISH_FILES); do \
425 for i in 0 1 2 3 4 5 6 7 8 9; do \
426 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
427 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
428 done \
429 done
430
431 # You need to first make binddisttest, and then run
432 # make publish 'prefix=$(BIN_DIST_INST_DIR)'
433 # for this to find the right place.
434
435 # We assume that Windows means Cygwin, as we can't just use docdir
436 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
437 # the machine c.
438
439 ifeq "$(Windows)" "YES"
440 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
441 else
442 PUBLISH_DOCDIR = $(docdir)
443 endif
444
445 publish-binary-dist ::
446 $(PublishCp) -r $(PUBLISH_DOCDIR)/* $(PublishLocation)/docs
447
448 binary-dist::
449 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
450
451 # -----------------------------------------------------------------------------
452 # Building source distributions
453 #
454 # Do it like this:
455 #
456 # $ make
457 # $ make dist
458 #
459 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
460 #
461
462 .PHONY: dist
463
464 #
465 # Directory in which we're going to build the src dist
466 #
467 SRC_DIST_NAME=ghc-$(ProjectVersion)
468 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
469
470 #
471 # Files to include in source distributions
472 #
473 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib,$(SUBDIRS))
474 SRC_DIST_FILES += \
475 configure.ac config.guess config.sub configure \
476 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
477 ghc.spec.in extra-gcc-opts.in VERSION boot
478
479 # -----------------------------------------------------------------------------
480 # Source distributions
481
482 # A source dist is built from a complete build tree, because we
483 # require some extra files not contained in a darcs checkout: the
484 # output from Happy and Alex, for example.
485 #
486 # The steps performed by 'make dist' are as follows:
487 # - create a complete link-tree of the current build tree in /tmp
488 # - run 'make distclean' on that tree
489 # - remove a bunch of other files that we know shouldn't be in the dist
490 # - tar up first the extralibs package, then the main source package
491
492 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
493
494 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
495 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
496
497 VERSION :
498 echo $(ProjectVersion) >VERSION
499
500 dist :: VERSION
501
502 dist ::
503 $(RM) -rf $(SRC_DIST_DIR)
504 $(RM) $(SRC_DIST_NAME).tar.gz
505 mkdir $(SRC_DIST_DIR)
506 ( cd $(SRC_DIST_DIR) \
507 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
508 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
509 && $(MAKE) distclean \
510 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; fi \
511 && $(RM) -rf compiler/stage[123] mk/build.mk \
512 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
513 )
514 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
515 $(RM) -rf $(EXTRA_LIBS)
516 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
517
518 # Upload the distribution(s)
519 # Retrying is to work around buggy firewalls that corrupt large file transfers
520 # over SSH.
521 ifneq "$(PublishLocation)" ""
522 dist ::
523 @for i in 0 1 2 3 4 5 6 7 8 9; do \
524 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
525 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
526 done
527 @for i in 0 1 2 3 4 5 6 7 8 9; do \
528 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
529 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
530 done
531 endif
532
533 # -----------------------------------------------------------------------------
534 # HC file bundles
535
536 hc-file-bundle :
537 $(RM) -r ghc-$(ProjectVersion)
538 $(LN_S) . ghc-$(ProjectVersion)
539 $(FIND) ghc-$(ProjectVersion)/compiler \
540 ghc-$(ProjectVersion)/utils \
541 ghc-$(ProjectVersion)/compat \
542 ghc-$(ProjectVersion)/libraries -follow \
543 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
544 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
545 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
546 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
547 fi; \
548 done;
549 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
550 if test "x$$f" != "x"; then \
551 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
552 fi; \
553 done;
554 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
555 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
556 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
557 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
558 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
559 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
560
561 # -----------------------------------------------------------------------------
562 # Cleaning
563
564 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
565
566 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
567 ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts
568
569 # don't clean config.mk: it's needed when cleaning stuff later on
570 LATE_DIST_CLEAN_FILES += mk/config.mk
571
572 # VERSION is shipped in a source dist
573 MAINTAINER_CLEAN_FILES += VERSION
574
575 extraclean::
576 $(RM) -rf autom4te.cache
577
578 clean distclean ::
579 $(MAKE) -C bindisttest $@
580 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
581
582 # -----------------------------------------------------------------------------
583
584 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
585 NO_BOOT_TARGET=YES
586 NO_ALL_TARGET=YES
587 NO_INSTALL_TARGET=YES
588
589 include $(TOP)/mk/target.mk
590
591 # -----------------------------------------------------------------------------
592