Remove an erroneous comma from the Makefile
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
42 # installer package
43 #
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
47 #
48 # hc-file-bundle
49 # Builds an HC-file bundle, for bootstrapping
50 #
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
53 #
54 ############################################################################
55
56 TOP=.
57 include $(TOP)/mk/boilerplate.mk
58
59 #
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
62 #
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
65 #
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
67
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = includes compiler docs utils driver
71 else
72 SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc
73 endif
74
75 SUBDIRS = gmp libffi includes utils driver docs rts compiler ghc libraries libraries/Cabal/doc
76
77 check-all: check-packages
78
79 # Sanity check that all the boot libraries are in the tree, to catch
80 # failure to run darcs-all.
81 check-packages :
82 @ds=`grep "^[^# ][^ ]* *[^ ][^ ]* *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\
83 for d in $$ds; do \
84 if test ! -d $$d; then \
85 echo "Looks like you're missing $$d,"; \
86 echo "maybe you haven't done './darcs-all get'?"; \
87 exit 1; \
88 fi \
89 done
90 @if test ! -f libraries/base/configure; then \
91 echo "Looks like you're missing base's configure script."; \
92 echo "Did you run 'sh boot' at the top level?"; \
93 exit 1; \
94 fi
95
96 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
97 ifneq "$(WhatGccIsCalled)" ""
98 GCC_LIB_DEP = stamp.inplace-gcc-lib
99 endif
100 endif
101
102 stage1 : $(GCC_LIB_DEP) check-all
103 $(MAKE) -C libraries boot
104 $(MAKE) -C gmp all
105 $(MAKE) -C libffi all
106 $(MAKE) -C utils/mkdependC boot
107 $(MAKE) -C utils with-bootstrapping-compiler
108 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
109 for i in $(SUBDIRS_BUILD); do \
110 echo "------------------------------------------------------------------------"; \
111 echo "== $(MAKE) boot $(MFLAGS);"; \
112 echo " in $(shell pwd)/$$i"; \
113 echo "------------------------------------------------------------------------"; \
114 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
115 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
116 done; \
117 for i in $(SUBDIRS_BUILD); do \
118 echo "------------------------------------------------------------------------"; \
119 echo "== $(MAKE) all $(MFLAGS);"; \
120 echo " in $(shell pwd)/$$i"; \
121 echo "------------------------------------------------------------------------"; \
122 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
123 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
124 done
125 $(MAKE) -C rts boot
126 $(MAKE) -C rts
127 $(MAKE) -C libraries all
128
129 # When making distributions (i.e., whether with binary-dist or using the
130 # vanilla install target to create an installer package), we can have problems
131 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
132 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
133 # an example. Thus, we explicitly build a second version with the stage 1
134 # compiler of all utils that get installed and of all extra support binaries
135 # includes in binary dists.
136 stage2 : check-all
137 $(MAKE) -C compiler stage=2 boot
138 $(MAKE) -C compiler stage=2
139 $(MAKE) -C utils with-stage-2
140 ifeq "$(HADDOCK_DOCS)" "YES"
141 $(MAKE) -C libraries doc
142 $(MAKE) -C compiler doc stage=2
143 endif
144
145 stage3 : check-all
146 $(MAKE) -C compiler stage=3 boot
147 $(MAKE) -C compiler stage=3
148
149 bootstrap : bootstrap2
150
151 bootstrap2 : stage1
152 $(MAKE) stage2
153
154 bootstrap3 : bootstrap2
155 $(MAKE) stage3
156
157 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
158 ifneq "$(WhatGccIsCalled)" ""
159 all :: stamp.inplace-gcc-lib
160
161 .PHONY: stamp.inplace-gcc-lib
162
163 # This is a hack to make Cabal able to find ld when we run tests with
164 # the inplace ghc. We should probably install all the gcc stuff in our
165 # tree somewhere, and then have install copy it from there rather than
166 # from the filesystem.
167 stamp.inplace-gcc-lib:
168 $(RM) -r ghc/gcc-lib
169 mkdir ghc/gcc-lib
170 cp $(LD) ghc/gcc-lib
171 touch $@
172
173 clean ::
174 $(RM) -r ghc/gcc-lib
175 $(RM) -f inplace-gcc-lib
176 endif
177 endif
178
179 all :: bootstrap
180
181 # -----------------------------------------------------------------------------
182 # Installing
183
184 # We want to install the stage 2 bootstrapped compiler by default, but we let
185 # the user override this by saying 'make install stage=1', for example.
186 ifeq "$(stage)" ""
187 INSTALL_STAGE = stage=2
188 else
189 INSTALL_STAGE =
190 endif
191
192 install-strip:
193 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
194
195 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
196 install :: check-packages
197 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
198 for i in $(SUBDIRS); do \
199 echo "------------------------------------------------------------------------"; \
200 echo "== $(MAKE) $@ $(MFLAGS);"; \
201 echo " in $(shell pwd)/$$i"; \
202 echo "------------------------------------------------------------------------"; \
203 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
204 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
205 done
206
207 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
208 # These files need to be in the InstallShield
209 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
210 # in the top-level directory of the distribution
211 INSTALL_DATAS += ANNOUNCE LICENSE README
212 endif
213
214 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
215 # and the perl interpreter and dll into the GHC prefix directory.
216 # Gcc and Perl source locations derived from configuration data.
217 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
218 ifneq "$(WhatGccIsCalled)" ""
219 install ::
220 -mkdir $(prefix)/gcc-lib
221 -mkdir $(prefix)/include
222 -mkdir $(prefix)/include/mingw
223 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
224 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
225 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
226 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
227 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
228 -cp $(GccDir)gcc.exe $(prefix)
229 -cp $(GccDir)as.exe $(prefix)/gcc-lib
230 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
231 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
232 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
233 -cp $(GhcDir)../perl.exe $(prefix)
234 -cp $(GhcDir)../perl56.dll $(prefix)
235 endif
236 endif
237
238 # Install gcc-extra-opts
239 install ::
240 $(INSTALL_DIR) $(DESTDIR)$(libdir)
241 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
242
243 install-docs ::
244 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
245 for i in $(SUBDIRS); do \
246 echo "------------------------------------------------------------------------"; \
247 echo "== $(MAKE) $@ $(MFLAGS);"; \
248 echo " in $(shell pwd)/$$i"; \
249 echo "------------------------------------------------------------------------"; \
250 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
251 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
252 done
253
254 # -----------------------------------------------------------------------------
255 # Making a binary distribution
256 #
257 # `dist' `binary-dist'
258 # Create a distribution tar file for this program. The tar file
259 # should be set up so that the file names in the tar file start with
260 # a subdirectory name which is the name of the package it is a
261 # distribution for. This name can include the version number.
262 #
263 # For example, the distribution tar file of GCC version 1.40 unpacks
264 # into a subdirectory named `gcc-1.40'.
265 #
266 # The easiest way to do this is to create a subdirectory
267 # appropriately named, use ln or cp to install the proper files in
268 # it, and then tar that subdirectory.
269 #
270 # The dist target should explicitly depend on all non-source files
271 # that are in the distribution, to make sure they are up to date in
272 # the distribution. See Making Releases.
273 #
274 # binary-dist is a GHC addition for binary distributions
275 #
276
277 binary-dist::
278 -rm -rf $(BIN_DIST_DIR)
279 -$(RM) $(BIN_DIST_TAR_BZ2)
280
281 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
282
283 binary-dist::
284 $(MAKE) prefix=$(BIN_DIST_DIR) install
285 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
286
287 binary-dist::
288 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
289
290 binary-dist::
291 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
292 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
293
294 # Tar up the distribution and build a manifest
295 binary-dist :: tar-binary-dist
296
297 .PHONY: tar-binary-dist
298 tar-binary-dist:
299 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 > $(BIN_DIST_TAR_BZ2) )
300 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TAR_BZ2) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
301
302 else
303
304 .PHONY: binary-dist
305
306 BIN_DIST_VARFILE=$(BIN_DIST_PREP)/Makefile-vars.in
307
308 WHERE_AM_I = $(BIN_DIST_NAME)
309
310 binary-dist::
311 # For the most part we will be putting filenames in $(BIN_DIST_LIST),
312 # and telling tar to tar all of those files up. So to start with we
313 # remove $(BIN_DIST_LIST) so that we can start with an empty slate
314 $(RM) -f $(BIN_DIST_LIST)
315 # Now we add a few files from mk/ to $(BIN_DIST_LIST)
316 echo $(WHERE_AM_I)/mk/package.mk >> $(BIN_DIST_LIST)
317 echo $(WHERE_AM_I)/mk/install.mk >> $(BIN_DIST_LIST)
318 echo $(WHERE_AM_I)/mk/recurse.mk >> $(BIN_DIST_LIST)
319 echo $(WHERE_AM_I)/mk/cabal.mk >> $(BIN_DIST_LIST)
320 echo $(WHERE_AM_I)/mk/cabal-flags.mk >> $(BIN_DIST_LIST)
321 echo $(WHERE_AM_I)/mk/fptools.css >> $(BIN_DIST_LIST)
322 echo $(WHERE_AM_I)/ANNOUNCE >> $(BIN_DIST_LIST)
323 echo $(WHERE_AM_I)/LICENSE >> $(BIN_DIST_LIST)
324 echo $(WHERE_AM_I)/install-sh >> $(BIN_DIST_LIST)
325 echo $(WHERE_AM_I)/extra-gcc-opts.in >> $(BIN_DIST_LIST)
326 echo $(WHERE_AM_I)/config.guess >> $(BIN_DIST_LIST)
327 echo $(WHERE_AM_I)/config.sub >> $(BIN_DIST_LIST)
328 # Now we recurse into various subdirectories and tell them to add and
329 # files that they want into $(BIN_DIST_LIST)
330 # XXX Ug, this duplication of "-C foo WHERE_AM_I=.../foo" isn't nice.
331 $(MAKE) -C gmp binary-dist WHERE_AM_I=$(WHERE_AM_I)/gmp
332 $(MAKE) -C includes binary-dist WHERE_AM_I=$(WHERE_AM_I)/includes
333 $(MAKE) -C compiler binary-dist WHERE_AM_I=$(WHERE_AM_I)/compiler $(INSTALL_STAGE)
334 $(MAKE) -C ghc binary-dist WHERE_AM_I=$(WHERE_AM_I)/ghc $(INSTALL_STAGE)
335 $(MAKE) -C rts binary-dist WHERE_AM_I=$(WHERE_AM_I)/rts
336 $(MAKE) -C driver binary-dist WHERE_AM_I=$(WHERE_AM_I)/driver
337 $(MAKE) -C utils binary-dist WHERE_AM_I=$(WHERE_AM_I)/utils
338 $(MAKE) -C docs binary-dist WHERE_AM_I=$(WHERE_AM_I)/docs
339 $(MAKE) -C libraries binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries
340 $(MAKE) -C libraries/Cabal/doc binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries/Cabal/doc
341 # Now thinks get messier. Some files we need to move around, rename or
342 # generate. We do this under $(BIN_DIST_PREP).
343 $(RM) -rf $(BIN_DIST_PREP_DIR)
344 $(MKDIRHIER) $(BIN_DIST_PREP)/mk
345 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_PREP)/mk/boilerplate.mk
346 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_PREP)/mk/target.mk
347 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_PREP)/mk/target.mk
348 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_PREP)/mk/target.mk
349 touch $(BIN_DIST_PREP)/mk/bindist.mk
350 ifeq "$(darwin_TARGET_OS)" "1"
351 cp mk/fix_install_names.sh $(BIN_DIST_PREP)/mk
352 endif
353
354 cp distrib/Makefile $(BIN_DIST_PREP)
355 cp distrib/INSTALL $(BIN_DIST_PREP)
356 cp distrib/README $(BIN_DIST_PREP)
357 cp distrib/configure-bin.ac $(BIN_DIST_PREP)/configure.ac
358 # We can't just list aclocal.m4 in $(BIN_DIST_LIST), as it needs to be
359 # next to configure.ac when we run autoreconf
360 cp aclocal.m4 $(BIN_DIST_PREP)
361 cd $(BIN_DIST_PREP) && autoreconf
362 # We need to copy the pwd program that was built with stage1 to where
363 # the build system expects to find it, i.e. the location the pwd built
364 # with the bootstrapping compiler normally occupies
365 $(MKDIRHIER) $(BIN_DIST_PREP)/utils/pwd
366 cp utils/pwd/dist-install/build/pwd/pwd $(BIN_DIST_PREP)/utils/pwd
367 # And likewise the installPackage program
368 $(MKDIRHIER) $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
369 cp utils/installPackage/dist-install/build/installPackage/installPackage \
370 $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
371
372 echo "package = ghc" >> $(BIN_DIST_VARFILE)
373 echo "version = $(ProjectVersion)" >> $(BIN_DIST_VARFILE)
374 echo "ProjectVersion = $(ProjectVersion)" >> $(BIN_DIST_VARFILE)
375 echo "HaveLibGmp = $(HaveLibGmp)" >> $(BIN_DIST_VARFILE)
376 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(BIN_DIST_VARFILE)
377 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(BIN_DIST_VARFILE)
378 echo "GhcHasEditline = $(GhcHasEditline)" >> $(BIN_DIST_VARFILE)
379 echo "BootingFromHc = $(BootingFromHc)" >> $(BIN_DIST_VARFILE)
380 echo "XMLDocWays = $(XMLDocWays)" >> $(BIN_DIST_VARFILE)
381 # We won't actually use xsltproc, but we need to know if it's "" or not
382 echo "XSLTPROC = $(XSLTPROC)" >> $(BIN_DIST_VARFILE)
383 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(BIN_DIST_VARFILE)
384 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_VARFILE)
385 echo "INTEGER_LIBRARY = $(INTEGER_LIBRARY)" >> $(BIN_DIST_VARFILE)
386 cat distrib/Makefile-bin-vars.in >> $(BIN_DIST_VARFILE)
387
388 # With that done, we can now build the actual tarball
389
390 $(RM) -f $(BIN_DIST_NAME)
391 ln -s . $(BIN_DIST_NAME)
392 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
393 # tree then we want to include the real file, not a symlink to it
394 tar hcf $(BIN_DIST_TAR) -T $(BIN_DIST_LIST)
395 cd $(BIN_DIST_PREP_DIR) && tar rf $(BIN_DIST_TAR) $(BIN_DIST_NAME)
396 bzip2 < $(BIN_DIST_TAR) > $(BIN_DIST_TAR_BZ2)
397 tar tf $(BIN_DIST_TAR) | sort > bin-manifest-$(ProjectVersion)
398 endif
399
400 PUBLISH_FILES = $(BIN_DIST_TAR_BZ2)
401
402 # Upload the distribution and documentation
403 ifneq "$(ISCC)" ""
404 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
405 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
406
407 PUBLISH_FILES += $(WINDOWS_INSTALLER)
408
409 binary-dist :: generate-windows-installer
410
411 .PHONY: generate-windows-installer
412 generate-windows-installer ::
413 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
414 endif
415
416 # Upload the distribution and documentation
417 ifneq "$(PublishLocation)" ""
418 publish ::
419 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
420 endif
421
422 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
423
424 .PHONY: publish-binary-dist
425 publish-binary-dist ::
426 @for f in $(PUBLISH_FILES); \
427 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
428 done
429
430 # You need to "make binddisttest" before publishing the docs, as it
431 # works by publish setting $(prefix) to inside the binddisttest
432 # directory so $(docdir) points to the right place.
433
434 # We assume that Windows means Cygwin, as we can't just use docdir
435 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
436 # the machine c.
437
438 ifeq "$(Windows)" "YES"
439 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
440 else
441 PUBLISH_DOCDIR = $(docdir)
442 endif
443
444 publish-binary-dist ::
445 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
446
447 binary-dist::
448 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
449
450 # -----------------------------------------------------------------------------
451 # Building MacOS installer packages
452 #
453 # 'framework-pkg'
454 # Create an installer package for /Library/Frameworks/GHC.framework
455 #
456 # 'framework-binary-dist'
457 # Create an installer package for GHC.framework encapsulating a
458 # binary-dist to make it relocatable
459 # FIXME: This is only partially implemented so far
460
461 ifeq "$(darwin_TARGET_OS)" "1"
462
463 .PHONY: framework-pkg framework-binary-dist
464
465 framework-pkg:
466 $(MAKE) -C distrib/MacOS framework-pkg
467
468 framework-binary-dist:
469 $(MAKE) -C distrib/MacOS framework-binary-dist
470
471 endif
472
473 # -----------------------------------------------------------------------------
474 # Building source distributions
475 #
476 # Do it like this:
477 #
478 # $ make
479 # $ make dist
480 #
481 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
482 #
483
484 .PHONY: dist
485
486 #
487 # Directory in which we're going to build the src dist
488 #
489 SRC_DIST_NAME=ghc-$(ProjectVersion)
490 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
491
492 #
493 # Files to include in source distributions
494 #
495 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
496 SRC_DIST_FILES += \
497 configure.ac config.guess config.sub configure \
498 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
499 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
500
501 # -----------------------------------------------------------------------------
502 # Source distributions
503
504 # A source dist is built from a complete build tree, because we
505 # require some extra files not contained in a darcs checkout: the
506 # output from Happy and Alex, for example.
507 #
508 # The steps performed by 'make dist' are as follows:
509 # - create a complete link-tree of the current build tree in /tmp
510 # - run 'make distclean' on that tree
511 # - remove a bunch of other files that we know shouldn't be in the dist
512 # - tar up first the extralibs package, then the main source package
513
514 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
515
516 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
517 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
518
519 VERSION :
520 echo $(ProjectVersion) >VERSION
521
522 dist :: VERSION
523
524 dist ::
525 $(RM) -rf $(SRC_DIST_DIR)
526 $(RM) $(SRC_DIST_NAME).tar.gz
527 mkdir $(SRC_DIST_DIR)
528 ( cd $(SRC_DIST_DIR) \
529 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
530 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
531 && $(MAKE) distclean \
532 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
533 && $(RM) -rf compiler/stage[123] mk/build.mk \
534 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
535 )
536 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
537 $(RM) -rf $(EXTRA_LIBS)
538 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
539
540 # Upload the distribution(s)
541 # Retrying is to work around buggy firewalls that corrupt large file transfers
542 # over SSH.
543 ifneq "$(PublishLocation)" ""
544 dist ::
545 @for i in 0 1 2 3 4 5 6 7 8 9; do \
546 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
547 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
548 done
549 @for i in 0 1 2 3 4 5 6 7 8 9; do \
550 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
551 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
552 done
553 endif
554
555 # -----------------------------------------------------------------------------
556 # HC file bundles
557
558 hc-file-bundle :
559 $(RM) -r ghc-$(ProjectVersion)
560 $(LN_S) . ghc-$(ProjectVersion)
561 $(FIND) ghc-$(ProjectVersion)/compiler \
562 ghc-$(ProjectVersion)/utils \
563 ghc-$(ProjectVersion)/libraries -follow \
564 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
565 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
566 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
567 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
568 fi; \
569 done;
570 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
571 if test "x$$f" != "x"; then \
572 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
573 fi; \
574 done;
575 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
576 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
577 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
578 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
579 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
580 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
581
582 # -----------------------------------------------------------------------------
583 # Cleaning
584
585 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
586
587 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
588 docs/users_guide/ug-book.xml extra-gcc-opts
589
590 # don't clean config.mk: it's needed when cleaning stuff later on
591 LATE_DIST_CLEAN_FILES += mk/config.mk mk/are-validating.mk
592
593 # VERSION is shipped in a source dist
594 MAINTAINER_CLEAN_FILES += VERSION
595
596 extraclean::
597 $(RM) -rf autom4te.cache
598
599 clean distclean ::
600 $(RM) -rf inplace-datadir
601
602 clean distclean ::
603 $(MAKE) -C bindisttest $@
604 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
605
606 # -----------------------------------------------------------------------------
607
608 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
609 NO_BOOT_TARGET=YES
610 NO_ALL_TARGET=YES
611 NO_INSTALL_TARGET=YES
612
613 include $(TOP)/mk/target.mk
614
615 # -----------------------------------------------------------------------------
616