Build Windows installer when making a bindist if ISCC is set
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # hc-file-bundle
41 # Builds an HC-file bundle, for bootstrapping
42 #
43 # clean, distclean, maintainer-clean
44 # Increasing levels of cleanliness
45 #
46 ############################################################################
47
48 TOP=.
49 include $(TOP)/mk/boilerplate.mk
50
51 #
52 # Order is important! It's e.g. necessary to descend into include/
53 # before the rest to have a config.h, etc.
54 #
55 # If we're booting from .hc files, swap the order
56 # we descend into subdirs - to boot utils must be before driver.
57 #
58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
59
60 # We can't 'make boot' in libraries until stage1 is built
61 ifeq "$(BootingFromHc)" "YES"
62 SUBDIRS_NOLIB = includes rts compat compiler docs utils driver
63 else
64 SUBDIRS_NOLIB = includes compat utils driver docs compiler rts
65 endif
66
67 SUBDIRS = $(SUBDIRS_NOLIB) libraries
68
69 # Sanity check that all the core libraries are in the tree, to catch
70 # failure to run darcs-all.
71 check-packages :
72 @for d in `cat libraries/core-packages`; do \
73 if test ! -d libraries/$$d; then \
74 echo "Looks like you're missing libraries/$$d,"; \
75 echo "maybe you haven't done './darcs-all get'?"; \
76 exit 1; \
77 fi \
78 done
79 @if test ! -e libraries/base/configure; then \
80 echo "Looks like you're missing base's configure script."; \
81 echo "Did you run 'sh boot' at the top level?"; \
82 exit 1; \
83 fi
84
85 stage1 : check-packages
86 $(MAKE) -C utils/mkdependC boot
87 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
88 for i in $(SUBDIRS_NOLIB); do \
89 echo "------------------------------------------------------------------------"; \
90 echo "== $(MAKE) boot $(MFLAGS);"; \
91 echo " in $(shell pwd)/$$i"; \
92 echo "------------------------------------------------------------------------"; \
93 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
94 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
95 done; \
96 for i in $(SUBDIRS_NOLIB); do \
97 echo "------------------------------------------------------------------------"; \
98 echo "== $(MAKE) all $(MFLAGS);"; \
99 echo " in $(shell pwd)/$$i"; \
100 echo "------------------------------------------------------------------------"; \
101 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
102 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
103 done
104 $(MAKE) -C libraries boot
105 $(MAKE) -C libraries all
106
107 stage2 : check-packages
108 $(MAKE) -C compiler boot stage=2
109 $(MAKE) -C compiler stage=2
110
111 stage3 : check-packages
112 $(MAKE) -C compiler boot stage=3
113 $(MAKE) -C compiler stage=3
114
115 bootstrap : bootstrap2
116
117 bootstrap2 : stage1
118 $(MAKE) stage2
119
120 bootstrap3 : bootstrap2
121 $(MAKE) stage3
122
123 all :: bootstrap
124
125 # -----------------------------------------------------------------------------
126 # Installing
127
128 # We want to install the stage 2 bootstrapped compiler by default, but we let
129 # the user override this by saying 'make install stage=1', for example.
130 ifeq "$(stage)" ""
131 INSTALL_STAGE = stage=2
132 else
133 INSTALL_STAGE =
134 endif
135
136 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
137 install :: check-packages
138 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
139 for i in $(SUBDIRS); do \
140 echo "------------------------------------------------------------------------"; \
141 echo "== $(MAKE) $@ $(MFLAGS);"; \
142 echo " in $(shell pwd)/$$i"; \
143 echo "------------------------------------------------------------------------"; \
144 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
145 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
146 done
147
148 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
149 # These files need to be in the InstallShield
150 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
151 # in the top-level directory of the distribution
152 INSTALL_DATAS += ANNOUNCE LICENSE README
153 endif
154
155 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
156 # and the perl interpreter and dll into the GHC prefix directory.
157 # Gcc and Perl source locations derived from configuration data.
158 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
159 ifneq "$(WhatGccIsCalled)" ""
160 install ::
161 -mkdir $(prefix)/gcc-lib
162 -mkdir $(prefix)/include
163 -mkdir $(prefix)/include/mingw
164 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
165 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
166 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
167 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
168 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
169 -cp $(GccDir)gcc.exe $(prefix)
170 -cp $(GccDir)as.exe $(prefix)/gcc-lib
171 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
172 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
173 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
174 -cp $(GhcDir)../perl.exe $(prefix)
175 -cp $(GhcDir)../perl56.dll $(prefix)
176 endif
177 endif
178
179 install-docs ::
180 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
181 for i in $(SUBDIRS); do \
182 echo "------------------------------------------------------------------------"; \
183 echo "== $(MAKE) $@ $(MFLAGS);"; \
184 echo " in $(shell pwd)/$$i"; \
185 echo "------------------------------------------------------------------------"; \
186 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
187 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
188 done
189
190 # -----------------------------------------------------------------------------
191 # Making a binary distribution
192 #
193 # `dist' `binary-dist'
194 # Create a distribution tar file for this program. The tar file
195 # should be set up so that the file names in the tar file start with
196 # a subdirectory name which is the name of the package it is a
197 # distribution for. This name can include the version number.
198 #
199 # For example, the distribution tar file of GCC version 1.40 unpacks
200 # into a subdirectory named `gcc-1.40'.
201 #
202 # The easiest way to do this is to create a subdirectory
203 # appropriately named, use ln or cp to install the proper files in
204 # it, and then tar that subdirectory.
205 #
206 # The dist target should explicitly depend on all non-source files
207 # that are in the distribution, to make sure they are up to date in
208 # the distribution. See Making Releases.
209 #
210 # binary-dist is a GHC addition for binary distributions
211 #
212
213 ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
214 BinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs-ghc
215 else
216 BinDistShScripts =
217 endif
218
219 BinDistPrlScripts = ghcprof
220 BinDistLibPrlScripts = ghc-asm ghc-split
221 BinDistBins = hp2ps runghc
222 BinDistLinks = ghc ghci ghc-pkg
223 BinDistLibSplicedFiles = package.conf
224 BinDistDirs = includes compiler docs driver rts utils
225
226 BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
227
228 BIN_DIST_TOP= distrib/Makefile \
229 distrib/configure-bin.ac \
230 distrib/INSTALL \
231 distrib/README \
232 ANNOUNCE \
233 LICENSE \
234 utils/mkdirhier/mkdirhier \
235 install-sh \
236 config.guess \
237 config.sub \
238 aclocal.m4
239
240 ifeq "$(darwin_TARGET_OS)" "1"
241 BIN_DIST_TOP+=mk/fix_install_names.sh
242 endif
243
244 .PHONY: binary-dist-pre% binary-dist binary-pack
245
246 BINARY_DIST_PRE_RULES=$(foreach d,$(BinDistDirs),binary-dist-pre-$d)
247
248 binary-dist:: binary-dist-pre $(BINARY_DIST_PRE_RULES)
249
250 binary-dist-pre::
251 ifeq "$(BIN_DIST)" ""
252 @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in mk/build.mk"
253 @false
254 endif
255 -rm -rf $(BIN_DIST_DIR)
256 -$(RM) $(BIN_DIST_DIR).tar.gz
257 $(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)
258 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
259 $(MKDIRHIER) $(BIN_DIST_DIR)/share
260
261 $(BINARY_DIST_PRE_RULES): binary-dist-pre-%:
262 $(MAKE) -C $* $(MFLAGS) $(INSTALL_STAGE) install \
263 prefix=$(BIN_DIST_DIR) \
264 exec_prefix=$(BIN_DIST_DIR) \
265 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
266 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
267 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
268 datadir=$(BIN_DIST_DIR)/share
269
270 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
271
272 binary-dist::
273 @for i in $(BIN_DIST_TOP); do \
274 if test -f "$$i"; then \
275 echo cp $$i $(BIN_DIST_DIR); \
276 cp $$i $(BIN_DIST_DIR); \
277 fi; \
278 done;
279 @echo "Configuring the Makefile for this project..."
280 echo > $(VARFILE)
281 echo "package = ghc" >> $(VARFILE)
282 echo "version = $(ProjectVersion)" >> $(VARFILE)
283 echo "PACKAGE_SH_SCRIPTS = $(BinDistShScripts)" >> $(VARFILE)
284 echo "PACKAGE_PRL_SCRIPTS = $(BinDistPrlScripts)" >> $(VARFILE)
285 echo "PACKAGE_LIB_PRL_SCRIPTS = $(BinDistLibPrlScripts)" >> $(VARFILE)
286 echo "PACKAGE_LIB_SPLICED_FILES = $(BinDistLibSplicedFiles)" >> $(VARFILE)
287 echo "PACKAGE_BINS = $(BinDistBins)" >> $(VARFILE)
288 echo "PACKAGE_OPT_BINS = $(BinDistOptBins)" >> $(VARFILE)
289 echo "PACKAGE_LINKS = $(BinDistLinks)" >> $(VARFILE)
290 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
291 @echo "Generating a shippable configure script.."
292 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
293 ( cd $(BIN_DIST_DIR); autoconf )
294
295 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
296 binary-dist::
297 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
298 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
299 endif
300
301 #
302 # binary dist'ing the documentation.
303 # The default documentation to build/install is given below; overrideable
304 # via build.mk or the 'make' command-line.
305 #
306 # If BINDIST_DOC_WAYS is set, use that
307 # If XMLDocWays is set, use that
308 # Otherwise, figure out what we can build based on configure results
309
310 ifndef BINDIST_DOC_WAYS
311
312 ifneq "$(XMLDocWays)" ""
313 BINDIST_DOC_WAYS = $(XMLDocWays)
314 else
315 ifneq "$(XSLTPROC)" ""
316 BINDIST_DOC_WAYS = html
317 ifneq "$(FOP)" ""
318 BINDIST_DOC_WAYS += ps pdf
319 else
320 ifneq "$(PDFXMLTEX)" ""
321 BINDIST_DOC_WAYS += pdf
322 endif
323 ifneq "$(XMLTEX)" ""
324 ifneq "$(DVIPS)" ""
325 BINDIST_DOC_WAYS += ps
326 endif # DVIPS
327 endif # XMLTEX
328 endif # FOP
329 endif # XSLTPROC
330 endif # XMLDocWays
331
332 endif # BINDIST_DOC_WAYS
333
334 ifneq "$(DIR_DOCBOOK_XSL)" ""
335 .PHONY: binary-dist-doc-%
336
337 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
338
339 binary-dist :: $(BINARY_DIST_DOC_RULES)
340
341 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
342 $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
343 $(MAKE) -C $* $(MFLAGS) install-docs \
344 MAKING_BIN_DIST=1 \
345 XMLDocWays="$(BINDIST_DOC_WAYS)" \
346 prefix=$(BIN_DIST_DIR) \
347 exec_prefix=$(BIN_DIST_DIR) \
348 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
349 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
350 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
351 datadir=$(BIN_DIST_DIR)/share
352 endif
353
354 # Rename scripts to $i.prl and $i.sh where necessary.
355 # ToDo: do this in a cleaner way...
356
357 ifneq "$(BinDistPrlScripts)" ""
358 binary-dist::
359 @for i in $(BinDistPrlScripts); do \
360 echo "Renaming $$i to $$i.prl"; \
361 $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.prl; \
362 done
363 endif
364
365 ifneq "$(BinDistLibPrlScripts)" ""
366 binary-dist::
367 @for i in $(BinDistLibPrlScripts); do \
368 echo "Renaming $$i to $$i.prl"; \
369 $(MV) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i.prl; \
370 done
371 endif
372
373 ifneq "$(BinDistShScripts)" ""
374 binary-dist::
375 @for i in $(BinDistShScripts); do \
376 if test -x $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i ; then \
377 echo "Renaming $$i to $$i.sh"; \
378 $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.sh; \
379 fi \
380 done
381 endif
382
383 .PHONY: binary-dist-doc-%
384
385 binary-dist::
386 $(MAKE) -C libraries binary-dist
387
388 # Jiggle the files around to make a valid Windows distribution if necessary
389 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
390 binary-dist :: fiddle-binary-dist
391 endif
392
393 .PHONY: fiddle-binary-dist
394 fiddle-binary-dist:
395 cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
396 # Tar up the distribution and build a manifest
397 binary-dist :: tar-binary-dist
398
399 .PHONY: tar-binary-dist
400 tar-binary-dist:
401 ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
402 ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
403
404 PUBLISH_FILES = $(BIN_DIST_TARBALL)
405
406 # Upload the distribution and documentation
407 ifneq "$(ISCC)" ""
408 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
409 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER)$(exeext)
410
411 PUBLISH_FILES += $(WINDOWS_INSTALLER)
412
413 binary-dist :: generate-windows-installer
414
415 .PHONY: generate-windows-installer
416 generate-windows-installer ::
417 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
418 endif
419
420 # Upload the distribution and documentation
421 ifneq "$(PublishLocation)" ""
422 binary-dist :: publish-binary-dist
423 endif
424
425 .PHONY: publish-binary-dist
426 publish-binary-dist ::
427 @for f in $(PUBLISH_FILES); do \
428 @for i in 0 1 2 3 4 5 6 7 8 9; do \
429 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
430 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
431 done \
432 done
433
434 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
435 # On Windows, we cannot use absoluate pathnames to rsync, because they look
436 # like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/
437 # rather than share/, due to prep-bin-dist-mingw.
438 publish-binary-dist ::
439 $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
440 else
441 publish-binary-dist ::
442 $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
443 endif
444
445 binary-dist::
446 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
447
448 # -----------------------------------------------------------------------------
449 # Building source distributions
450 #
451 # Do it like this:
452 #
453 # $ make
454 # $ make dist
455 #
456 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
457 #
458
459 .PHONY: dist
460
461 #
462 # Directory in which we're going to build the src dist
463 #
464 SRC_DIST_NAME=ghc-$(ProjectVersion)
465 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
466
467 #
468 # Files to include in source distributions
469 #
470 SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS))
471 SRC_DIST_FILES += \
472 configure.ac config.guess config.sub configure \
473 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
474 ghc.spec.in VERSION
475
476 # -----------------------------------------------------------------------------
477 # Source distributions
478
479 # A source dist is built from a complete build tree, because we
480 # require some extra files not contained in a darcs checkout: the
481 # output from Happy and Alex, for example.
482 #
483 # The steps performed by 'make dist' are as follows:
484 # - create a complete link-tree of the current build tree in /tmp
485 # - run 'make distclean' on that tree
486 # - remove a bunch of other files that we know shouldn't be in the dist
487 # - tar up first the extralibs package, then the main source package
488
489 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
490
491 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
492 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
493
494 VERSION :
495 echo $(ProjectVersion) >VERSION
496
497 dist :: VERSION
498
499 dist ::
500 $(RM) -rf $(SRC_DIST_DIR)
501 $(RM) $(SRC_DIST_NAME).tar.gz
502 mkdir $(SRC_DIST_DIR)
503 ( cd $(SRC_DIST_DIR) \
504 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
505 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
506 && $(MAKE) distclean \
507 && $(RM) -rf compiler/stage[123] mk/build.mk \
508 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
509 )
510 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
511 $(RM) -rf $(EXTRA_LIBS)
512 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
513
514 # Upload the distribution(s)
515 # Retrying is to work around buggy firewalls that corrupt large file transfers
516 # over SSH.
517 ifneq "$(PublishLocation)" ""
518 dist ::
519 @for i in 0 1 2 3 4 5 6 7 8 9; do \
520 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)"; \
521 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation); then break; fi\
522 done
523 @for i in 0 1 2 3 4 5 6 7 8 9; do \
524 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)"; \
525 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation); then break; fi\
526 done
527 endif
528
529 # -----------------------------------------------------------------------------
530 # HC file bundles
531
532 hc-file-bundle :
533 $(RM) -r ghc-$(ProjectVersion)
534 $(LN_S) . ghc-$(ProjectVersion)
535 $(FIND) ghc-$(ProjectVersion)/compiler \
536 ghc-$(ProjectVersion)/utils \
537 ghc-$(ProjectVersion)/compat \
538 ghc-$(ProjectVersion)/libraries -follow \
539 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
540 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
541 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
542 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
543 fi; \
544 done;
545 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
546 if test "x$$f" != "x"; then \
547 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
548 fi; \
549 done;
550 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
551 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
552 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
553 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
554 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
555 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
556
557 # -----------------------------------------------------------------------------
558 # Cleaning
559
560 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
561
562 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
563 ghc.spec docs/users_guide/ug-book.xml
564
565 # don't clean config.mk: it's needed when cleaning stuff later on
566 LATE_DIST_CLEAN_FILES += mk/config.mk
567
568 # VERSION is shipped in a source dist
569 MAINTAINER_CLEAN_FILES += VERSION
570
571 extraclean::
572 $(RM) -rf autom4te.cache
573
574 # -----------------------------------------------------------------------------
575
576 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
577 NO_BOOT_TARGET=YES
578 NO_ALL_TARGET=YES
579 NO_INSTALL_TARGET=YES
580
581 include $(TOP)/mk/target.mk
582
583 # -----------------------------------------------------------------------------
584