Fix #16299 by deleting incorrect code from IfaceSyn
[ghc.git] / ghc.mk
1 # -----------------------------------------------------------------------------
2 #
3 # (c) 2009-2013 The University of Glasgow
4 #
5 # This file is part of the GHC build system.
6 #
7 # To understand how the build system works and how to modify it, see
8 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
10 #
11 # -----------------------------------------------------------------------------
12
13 # ToDo List.
14 #
15 # * remove old Makefiles, add new stubs for building in subdirs
16 # * docs/Makefile
17 # * docs/storage-mgmt/Makefile
18 # * docs/vh/Makefile
19 # * rts/dotnet/Makefile
20 # * utils/Makefile
21 # * add Makefiles for the rest of the utils/ programs that aren't built
22 # by default (need to exclude them from 'make all' too)
23
24 # Possible cleanups:
25 #
26 # * per-source-file dependencies instead of one .depend file?
27 # * eliminate undefined variables, and use --warn-undefined-variables?
28 # * put outputs from different ways in different subdirs of distdir/build,
29 # then we don't have to use -osuf/-hisuf. We would have to install
30 # them in different places too, so we'd need ghc-pkg support for packages
31 # of different ways.
32 # * make PACKAGES_STAGE1 generated by './configure' or './boot'?
33 # * we should use a directory of package.conf files rather than a single
34 # file for the inplace package database, so that we can express
35 # dependencies more accurately. Otherwise it's possible to get into
36 # a state where the package database is out of date, and the build
37 # system doesn't know.
38
39 # Approximate build order.
40 #
41 # The actual build order is defined by dependencies, and the phase
42 # ordering used to ensure correct ordering of makefile-generation; see
43 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
44 #
45 # * With bootstrapping compiler:
46 # o Build utils/ghc-cabal
47 # o Build utils/ghc-pkg
48 # o Build utils/hsc2hs
49 # o Build utils/genprimopcode
50 # o Build utils/deriveConstants
51 # * For each package:
52 # o configure, generate package-data.mk and inplace-pkg-config
53 # o register each package into inplace/lib/package.conf
54 # * build libffi (if not disabled by --with-system-libffi)
55 # * With bootstrapping compiler:
56 # o Build libraries/{filepath,hpc,Cabal}
57 # o Build compiler (stage 1)
58 # * With stage 1 compiler:
59 # o Build libraries/*
60 # o Build rts
61 # o Build utils/* (except haddock)
62 # o Build compiler (stage 2)
63 # * With stage 2 compiler:
64 # o Build utils/haddock
65 # o Build compiler (stage 3) (optional)
66 # * With haddock:
67 # o libraries/*
68 # o compiler
69
70 .PHONY: default all haddock
71
72 # We need second expansion for the way we handle directories, so that
73 # | $$$$(dir $$$$@)/.
74 # expands to the directory of a rule that uses a % pattern.
75 .SECONDEXPANSION:
76
77 default : all
78
79
80 ##################################################
81 # Check that we have a new enough 'make'
82
83 HAVE_EVAL := NO
84 $(eval HAVE_EVAL := YES)
85
86 ifeq "$(HAVE_EVAL)" "NO"
87 $(error Your make does not support eval. You need GNU make >= 3.81)
88 endif
89
90 ifeq "$(abspath /)" ""
91 $(error Your make does not support abspath. You need GNU make >= 3.81)
92 endif
93 ##################################################
94
95 # -----------------------------------------------------------------------------
96 # Catch make if it runs away into an infinite loop
97 ifeq "$(MAKE_RESTARTS)" ""
98 else ifeq "$(MAKE_RESTARTS)" "1"
99 else
100 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
101 endif
102
103 # -----------------------------------------------------------------------------
104 # Misc GNU make utils
105
106 nothing=
107 space=$(nothing) $(nothing)
108 comma=,
109
110 # -----------------------------------------------------------------------------
111 # Makefile debugging
112 #
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
115 #
116
117 show:
118 @echo '$(VALUE)="$($(VALUE))"'
119
120 # echo is used by the nightly builders to query the build system for
121 # information.
122 # Using printf means that we don't get a trailing newline. We escape
123 # backslashes and double quotes in the string to protect them from the
124 # shell, and percent signs to protect them from printf.
125 echo:
126 @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))"
127
128 # -----------------------------------------------------------------------------
129 # Include subsidiary build-system bits
130
131 include mk/tree.mk
132
133 ifneq "$(CLEANING)" "YES"
134 include mk/config.mk
135 ifeq "$(ProjectVersion)" ""
136 $(error Please run ./configure first)
137 endif
138 endif
139
140 include mk/ways.mk
141
142 # (Optional) build-specific configuration
143 include mk/custom-settings.mk
144
145 # The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append
146 # '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after
147 # mk/custom-settings.mk.
148 include mk/warnings.mk
149
150 # -----------------------------------------------------------------------------
151 # Check for inconsistent settings, after reading mk/build.mk.
152 # Although mk/config.mk should always contain consistent settings (set by
153 # configure), mk/build.mk can contain pretty much anything.
154
155 ifneq "$(CLEANING)" "YES"
156
157 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
158 ifeq "$(findstring dyn,$(GhcLibWays))" ""
159 $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
160 endif
161 else
162 ifeq "$(findstring v,$(GhcLibWays))" ""
163 $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
164 endif
165 endif
166
167 ifeq "$(GhcProfiled)" "YES"
168 ifeq "$(findstring p,$(GhcLibWays))" ""
169 $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
170 endif
171 endif
172
173 ifeq "$(BUILD_SPHINX_HTML)" "YES"
174 ifeq "$(SPHINXBUILD)" ""
175 $(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \
176 Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \
177 (when validating), or install `sphinx-build` and rerun `./configure`. \
178 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
179 endif
180 endif
181
182 ifeq "$(BUILD_SPHINX_PDF)" "YES"
183 ifeq "$(XELATEX)" ""
184 $(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \
185 Install `xelatex`, then rerun `./configure`. \
186 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
187 endif
188 endif
189
190 ifeq "$(HSCOLOUR_SRCS)" "YES"
191 ifeq "$(HSCOLOUR_CMD)" ""
192 $(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \
193 Run `cabal install hscolour`, then rerun `./configure`. \
194 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
195 endif
196 endif
197
198 ifeq "$(HADDOCK_DOCS)" "YES"
199 ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
200 $(error Can not build haddock docs when CrossCompiling or Stage1Only. \
201 Set HADDOCK_DOCS=NO in your mk/build.mk file. \
202 See Note [No stage2 packages when CrossCompiling or Stage1Only])
203 endif
204 endif
205
206 endif # CLEANING
207
208 # -----------------------------------------------------------------------------
209
210 ifeq "$(phase)" ""
211 phase = final
212 endif
213
214 # -----------------------------------------------------------------------------
215 # Utility definitions
216
217 include rules/prof.mk
218 include rules/trace.mk
219 include rules/library-path.mk
220 include rules/add-dependency.mk
221 include rules/make-command.mk
222 include rules/pretty_commands.mk
223
224 # -----------------------------------------------------------------------------
225 # Macros for standard targets
226
227 include rules/all-target.mk
228 include rules/clean-target.mk
229
230 # -----------------------------------------------------------------------------
231 # The inplace tree
232
233 $(eval $(call clean-target,root,inplace,inplace/bin inplace/lib))
234
235 # -----------------------------------------------------------------------------
236 # Whether to build dependencies or not
237
238 # When we're just doing 'make clean' or 'make show', then we don't need
239 # to build dependencies.
240
241 ifeq "$(CLEANING)" "YES"
242 NO_INCLUDE_DEPS = YES
243 NO_INCLUDE_PKGDATA = YES
244 endif
245 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
246 NO_INCLUDE_DEPS = YES
247 NO_INCLUDE_PKGDATA = YES
248 endif
249 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
250 NO_INCLUDE_DEPS = YES
251 # We want package-data.mk for show
252 endif
253
254 # -----------------------------------------------------------------------------
255 # Ways
256
257 include rules/way-prelims.mk
258
259 $(foreach way,$(ALL_WAYS),\
260 $(eval $(call way-prelims,$(way))))
261
262 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
263 GHCI_WAY = dyn
264 HADDOCK_WAY = dyn
265 else
266 GHCI_WAY = v
267 HADDOCK_WAY = v
268 endif
269
270 WINDOWS_DYN_PROG_RTS := rts
271 ifeq "$(GhcThreaded)" "YES"
272 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr
273 endif
274 ifeq "$(GhcDebugged)" "YES"
275 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
276 endif
277 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE
278
279 # -----------------------------------------------------------------------------
280 # Compilation Flags
281
282 include rules/distdir-opts.mk
283 include rules/distdir-way-opts.mk
284
285 # -----------------------------------------------------------------------------
286 # Finding source files and object files
287
288 include rules/hs-sources.mk
289 include rules/c-sources.mk
290 include rules/includes-sources.mk
291 include rules/hs-objs.mk
292 include rules/c-objs.mk
293 include rules/cmm-objs.mk
294
295 # -----------------------------------------------------------------------------
296 # Suffix rules
297
298 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
299 # so we don't make any when cleaning.
300 ifneq "$(CLEANING)" "YES"
301 include rules/hs-suffix-rules-srcdir.mk
302 include rules/hs-suffix-way-rules-srcdir.mk
303 include rules/hs-suffix-way-rules.mk
304 include rules/hi-rule.mk
305 include rules/c-suffix-rules.mk
306 include rules/cmm-suffix-rules.mk
307 endif
308
309 # -----------------------------------------------------------------------------
310 # Building package-data.mk files from .cabal files
311
312 include rules/package-config.mk
313
314 # -----------------------------------------------------------------------------
315 # Building dependencies
316
317 include rules/dependencies.mk
318 include rules/build-dependencies.mk
319 include rules/include-dependencies.mk
320
321 # -----------------------------------------------------------------------------
322 # Build package-data.mk files
323
324 include rules/build-package-data.mk
325
326 # -----------------------------------------------------------------------------
327 # Build and install a program
328
329 include rules/build-prog.mk
330 include rules/shell-wrapper.mk
331
332 # -----------------------------------------------------------------------------
333 # Build a perl script
334
335 include rules/build-perl.mk
336
337 # -----------------------------------------------------------------------------
338 # Build a package
339
340 include rules/build-package.mk
341 include rules/build-package-way.mk
342 include rules/haddock.mk
343 include rules/foreachLibrary.mk
344
345 # -----------------------------------------------------------------------------
346 # Registering hand-written package descriptions (used in rts)
347
348 include rules/manual-package-config.mk
349
350 # -----------------------------------------------------------------------------
351 # Docs
352
353 include rules/sphinx.mk
354
355 # -----------------------------------------------------------------------------
356 # Making bindists and sdists
357
358 include rules/bindist.mk
359 include rules/sdist-ghc-file.mk
360
361 # -----------------------------------------------------------------------------
362 # Directories
363
364 # Don't try to delete directories:
365 .PRECIOUS: %/.
366
367 # Create build directories on demand. NB. the | below: this indicates
368 # that $(MKDIRHIER) is an order-only dependency, which means that this
369 # rule fires after building mkdirhier, but we won't try to recreate
370 # directories if mkdirhier changes.
371 %/. : | $(MKDIRHIER)
372 "$(MKDIRHIER)" $@
373
374 # -----------------------------------------------------------------------------
375 # Lax dependencies
376
377 ifeq "$(LAX_DEPENDENCIES)" "YES"
378 LAX_DEPS_FOLLOW = |
379 else
380 LAX_DEPS_FOLLOW =
381 endif
382
383 # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
384 # looking like
385 # target: a | b | c
386 # The first | signals the start of the order-only dependencies, but make
387 # treats the second | as a dependency. So we need to tell make how to
388 # build that dependency.
389
390 .PHONY: |
391 | :
392 @:
393
394 # -----------------------------------------------------------------------------
395 # Packages to build
396 # The lists of packages that we *actually* going to build in each stage:
397 #
398 # $(PACKAGES_STAGE0)
399 # $(PACKAGES_STAGE1)
400 # $(PACKAGES_STAGE2)
401 #
402 # Note that we need to add them to these variables in dependency
403 # order, as this is the order that they get configured in.
404
405 ifeq "$(CLEANING)" "YES"
406
407 define addLibraryForCleaning
408 # We just add all packages to both the stage 0 and stage 1 lists.
409 # Stage 2 gets cleaned in the same way as stage 1, so no need to
410 # add it there.
411 PACKAGES_STAGE0 += $1
412 PACKAGES_STAGE1 += $1
413 endef
414 $(eval $(call foreachLibrary,addLibraryForCleaning))
415
416 else # CLEANING
417
418 # Packages that are built by stage0. These packages are dependencies of
419 # programs such as GHC and ghc-pkg, that we do not assume the stage0
420 # compiler already has installed (or up-to-date enough).
421
422 PACKAGES_STAGE0 = binary text transformers mtl parsec Cabal/Cabal hpc ghc-boot-th ghc-boot template-haskell ghc-heap ghci
423 ifeq "$(Windows_Host)" "NO"
424 PACKAGES_STAGE0 += terminfo
425 endif
426
427 PACKAGES_STAGE1 += ghc-prim
428 PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
429 PACKAGES_STAGE1 += base
430 PACKAGES_STAGE1 += filepath
431 PACKAGES_STAGE1 += array
432 PACKAGES_STAGE1 += deepseq
433 PACKAGES_STAGE1 += bytestring
434 PACKAGES_STAGE1 += containers
435
436 ifeq "$(Windows_Target)" "YES"
437 PACKAGES_STAGE1 += Win32
438 endif
439 PACKAGES_STAGE1 += time
440 ifeq "$(Windows_Target)" "NO"
441 PACKAGES_STAGE1 += unix
442 endif
443
444 PACKAGES_STAGE1 += directory
445 PACKAGES_STAGE1 += process
446 PACKAGES_STAGE1 += hpc
447 PACKAGES_STAGE1 += pretty
448 PACKAGES_STAGE1 += binary
449 PACKAGES_STAGE1 += text
450 PACKAGES_STAGE1 += transformers
451 PACKAGES_STAGE1 += mtl
452 PACKAGES_STAGE1 += parsec
453 PACKAGES_STAGE1 += Cabal/Cabal
454 PACKAGES_STAGE1 += ghc-boot-th
455 PACKAGES_STAGE1 += ghc-boot
456 PACKAGES_STAGE1 += template-haskell
457 PACKAGES_STAGE1 += ghc-compact
458 PACKAGES_STAGE1 += ghc-heap
459
460 ifeq "$(HADDOCK_DOCS)" "YES"
461 PACKAGES_STAGE1 += xhtml
462 endif
463
464 ifeq "$(WITH_TERMINFO)" "YES"
465 PACKAGES_STAGE1 += terminfo
466 else
467 libraries/haskeline_CONFIGURE_OPTS += --flags=-terminfo
468 endif
469
470 PACKAGES_STAGE1 += stm
471 PACKAGES_STAGE1 += haskeline
472 PACKAGES_STAGE1 += ghci
473 PACKAGES_STAGE1 += libiserv
474
475 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
476 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
477 ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO"
478 define addExtraPackage
479 ifeq "$2" "-"
480 # Do nothing; this package is already handled above
481 else ifeq "$2" "extra"
482 ifeq "$$(BUILD_EXTRA_PKGS)" "YES"
483 PACKAGES_STAGE2 += $1
484 endif
485 else
486 $$(error Unknown package tag: $2)
487 endif
488 endef
489 $(eval $(call foreachLibrary,addExtraPackage))
490 endif
491
492 # We install all packages that we build.
493 INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
494 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
495 ifneq "$(Stage1Only)" "YES"
496 INSTALL_PACKAGES += compiler
497 endif
498 INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
499
500 endif # CLEANING
501
502 # -------------------------------------------
503 # Note [Dependencies between package-data.mk files].
504
505 # We cannot run ghc-cabal to configure a package until we have
506 # configured and registered all of its dependencies. So the following
507 # hack forces all the configure steps to happen in exactly the following order:
508 #
509 # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
510 #
511 # Ideally we should use the correct dependencies here to allow more
512 # parallelism, but we don't know the dependencies until we've
513 # generated the package-data.mk files.
514 define fixed_pkg_dep
515 libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev)
516 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
517 endef
518
519 ifneq "$(BINDIST)" "YES"
520 fixed_pkg_prev=
521 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
522
523 # Intermezzo: utils that we build with the stage1 compiler. They depend on
524 # the stage1 packages, so we have to make sure those packages get configured
525 # and registered before we can start with these. Note that they don't depend on
526 # eachother, so we can configure them in parallel.
527 utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev)
528 utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev)
529 utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev)
530 utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev)
531 utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev)
532 utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev)
533 utils/iserv/stage2/package-data.mk: $(fixed_pkg_prev)
534 utils/iserv/stage2_p/package-data.mk: $(fixed_pkg_prev)
535 utils/iserv/stage2_dyn/package-data.mk: $(fixed_pkg_prev)
536 ifeq "$(Windows_Host)" "YES"
537 utils/gen-dll/dist-install/package-data.mk: $(fixed_pkg_prev)
538 endif
539
540 # the GHC package doesn't live in libraries/, so we add its dependency manually:
541 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
542
543 # and continue with PACKAGES_STAGE2, which depend on GHC:
544 fixed_pkg_prev:=compiler/stage2/package-data.mk
545 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
546
547 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
548 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
549
550 # Utils that we build with the stage2 compiler.
551 # They depend on the ghc library and some other libraries, but depending on
552 # the ghc library's package-data.mk is sufficient, as that in turn depends on
553 # all the other libraries' package-data.mk files.
554 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
555 utils/check-api-annotations/dist-install/package-data.mk: compiler/stage2/package-data.mk
556 utils/check-ppr/dist-install/package-data.mk: compiler/stage2/package-data.mk
557
558 # add the final package.conf dependency: ghc-prim depends on RTS
559 libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace
560 endif
561
562 # --------------------------------
563 # Misc package-related settings
564
565 # Run Haddock for the packages that will be installed. We need to handle
566 # compiler specially due to the different dist directory name.
567 $(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES))
568 compiler_stage2_DO_HADDOCK = YES
569
570 BOOT_PKG_CONSTRAINTS := \
571 $(foreach d,$(PACKAGES_STAGE0),\
572 $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
573 --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
574
575 # The actual .a and .so/.dll files: needed for dependencies.
576 $(foreach way,$(GhcLibWays),$(eval ALL_STAGE1_$(way)_LIBS = $$(foreach lib,$$(PACKAGES_STAGE1),$$(libraries/$$(lib)_dist-install_$(way)_LIB))))
577
578 ALL_STAGE1_LIBS = $(ALL_STAGE1_v_LIBS)
579
580 ifeq "$(BuildSharedLibs)" "YES"
581 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
582 endif
583 BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
584
585 # Only build internal interpreter support for the stage2 ghci lib
586 libraries/ghci_dist-install_CONFIGURE_OPTS += --flags=ghci
587
588 # ----------------------------------------
589 # Special magic for the ghc-prim package
590
591 # We want the ghc-prim package to include the GHC.Prim module when it
592 # is registered, but not when it is built, because GHC.Prim is not a
593 # real source module, it is built-in to GHC.
594
595 # Strip it out again before building the package:
596 define libraries/ghc-prim_PACKAGE_MAGIC
597 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
598 endef
599
600 PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt
601
602 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/.
603 "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@
604
605 # Required so that Haddock documents the primops.
606 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
607
608 # ----------------------------------------
609 # Special magic for the integer package
610
611 ifneq "$(CLEANING)" "YES"
612 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
613 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp
614 compiler_stage2_CONFIGURE_OPTS += --flags=integer-gmp
615 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
616 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
617 compiler_stage2_CONFIGURE_OPTS += --flags=integer-simple
618 else
619 $(error Unknown integer library: $(INTEGER_LIBRARY))
620 endif
621 endif
622
623 # -----------------------------------------------------------------------------
624 # Include build instructions from all subdirs
625 BUILD_DIRS += utils/mkdirhier
626 BUILD_DIRS += utils/touchy
627 BUILD_DIRS += utils/unlit
628 BUILD_DIRS += utils/hp2ps
629 BUILD_DIRS += driver/split
630 BUILD_DIRS += utils/genprimopcode
631 BUILD_DIRS += driver
632 BUILD_DIRS += driver/ghci
633 BUILD_DIRS += driver/ghc
634 BUILD_DIRS += driver/haddock
635 BUILD_DIRS += libffi
636 BUILD_DIRS += utils/deriveConstants
637 BUILD_DIRS += includes
638 BUILD_DIRS += rts
639 BUILD_DIRS += bindisttest
640 BUILD_DIRS += utils/genapply
641 ifeq "$(Windows_Host)" "YES"
642 BUILD_DIRS += utils/gen-dll
643 endif
644
645 # When cleaning, don't add any library packages to BUILD_DIRS. We include
646 # ghc.mk files for all BUILD_DIRS, but they don't exist until after running
647 # `./boot`. Running `make clean` before anything else, as well as running
648 # `make maintainer-clean` twice, should work.
649 ifneq "$(CLEANING)" "YES"
650 # These are deliberately in reverse order, so as to ensure that
651 # there is no need to have them in dependency order. That's important
652 # because it's tricky to ensure that they are in dependency order when
653 # cross-compiling, as some packages may only be in PACKAGES_STAGE0
654 # or PACKAGES_STAGE1.
655 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
656 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
657 BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
658 endif
659
660 BUILD_DIRS += libraries/integer-gmp/gmp
661 BUILD_DIRS += utils/haddock
662 BUILD_DIRS += utils/haddock/doc
663 BUILD_DIRS += compiler
664 BUILD_DIRS += utils/hsc2hs
665 BUILD_DIRS += utils/ghc-pkg
666 BUILD_DIRS += utils/testremove
667 BUILD_DIRS += utils/check-api-annotations
668 BUILD_DIRS += utils/check-ppr
669 BUILD_DIRS += utils/ghc-cabal
670 BUILD_DIRS += utils/hpc
671 BUILD_DIRS += utils/runghc
672 BUILD_DIRS += ghc
673 BUILD_DIRS += docs/users_guide
674 BUILD_DIRS += utils/count_lines
675 BUILD_DIRS += utils/compare_sizes
676 BUILD_DIRS += utils/iserv
677
678 # ----------------------------------------------
679 # Actually include the sub-ghc.mk's
680
681 ifeq "$(CLEANING)" "YES"
682 # Don't exclude any BUILD_DIRS when cleaning. When you for example build
683 # haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean'
684 # should still clean the haddock directory.
685 else # CLEANING
686 ifeq "$(BINDIST)" "YES"
687 BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS))
688 BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS))
689 BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS))
690 BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS))
691 endif
692 ifeq "$(HADDOCK_DOCS)" "NO"
693 BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS))
694 BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS))
695 endif
696 ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO"
697 BUILD_DIRS := $(filter-out docs/users_guide,$(BUILD_DIRS))
698 # Don't to build this little utility if we're not building the User's Guide.
699 endif
700 ifeq "$(Windows_Host)" "NO"
701 BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS))
702 endif
703 ifeq "$(GhcUnregisterised)" "YES"
704 BUILD_DIRS := $(filter-out driver/split,$(BUILD_DIRS))
705 endif
706 ifeq "$(GhcWithInterpreter)" "NO"
707 # runghc is just GHCi in disguise
708 BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS))
709 endif
710 ifneq "$(INTEGER_LIBRARY)" "integer-gmp"
711 BUILD_DIRS := $(filter-out libraries/integer-gmp/gmp,$(BUILD_DIRS))
712 endif
713 ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
714 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
715 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
716 BUILD_DIRS := $(filter-out utils/check-api-annotations,$(BUILD_DIRS))
717 BUILD_DIRS := $(filter-out utils/check-ppr,$(BUILD_DIRS))
718 endif
719 endif # CLEANING
720
721 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
722
723 # A useful pseudo-target (must be after the include above, because it needs
724 # the value of things like $(libraries/base_dist-install_v_LIB).
725 .PHONY: stage1_libs
726 stage1_libs : $(ALL_STAGE1_LIBS)
727
728 # We need this extra dependency when building our own libffi, because
729 # GHCi.FFI.hs #includes ffi.h
730 ifneq "$(UseSystemLibFFI)" "YES"
731 libraries/ghci/dist-install/build/GHCi/FFI.hs : $(libffi_HEADERS)
732 endif
733
734 # ----------------------------------------------
735 # Per-package compiler flags
736 #
737 # If you want to add per-package compiler flags, see `mk/warnings.mk`.
738
739 # Add $(GhcLib(Extra)HcOpts) to all package builds
740 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
741 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts)))
742
743 # Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds
744 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
745 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts)))
746
747 # -----------------------------------------------------------------------------
748 # Bootstrapping libraries
749
750 # We need to build a few libraries with the installed GHC, since GHC itself
751 # and some of the tools depend on them:
752
753 ifneq "$(BINDIST)" "YES"
754
755 ifneq "$(BOOTSTRAPPING_CONF)" ""
756 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
757 $(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF))
758 endif
759 endif
760
761 $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
762
763 # register the boot packages in strict sequence, because running
764 # multiple ghc-pkgs in parallel doesn't work (registrations may get
765 # lost).
766 fixed_pkg_prev=
767 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
768 # ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is
769 # this really true?), depends on several boot packages (e.g. Cabal and
770 # ghc-boot). They need to be configured before ghc-pkg, so we add a
771 # dependency between their package-data.mk files. See also Note
772 # [Dependencies between package-data.mk files].
773 utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
774 compiler/stage1/package-data.mk: $(fixed_pkg_prev)
775 endif
776
777 ifneq "$(BINDIST)" "YES"
778 # Make sure we have all the GHCi libs by the time we've built
779 # ghc-stage2.
780 #
781 GHCI_LIBS = \
782 $(foreach way,$(GhcLibWays),\
783 $(foreach lib,$(PACKAGES_STAGE1),\
784 $(libraries/$(lib)_dist-install_$(way)_GHCI_LIB)) \
785 $(compiler_stage2_$(way)_GHCI_LIB))
786
787 ifeq "$(UseArchivesForGhci)" "NO"
788 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
789 endif
790
791 ifeq "$(UseArchivesForGhci)" "YES"
792 GHCI_lib_way = v
793 else
794 GHCI_lib_way = GHCI
795 endif
796
797 # Deps for TH uses in libraries
798 $(foreach way, $(GhcLibWays),$(eval \
799 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
800 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
801 ))
802 endif
803
804 # -----------------------------------------------
805 # Haddock-related bits
806
807 # Build the Haddock contents and index
808 ifeq "$(HADDOCK_DOCS)" "YES"
809 libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES)
810 cd libraries && sh gen_contents_index --intree
811 ifeq "$(phase)" "final"
812 $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
813 endif
814 INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
815 endif
816
817 # -----------------------------------------------------------------------------
818 # Creating a local mingw copy on Windows
819
820 ifeq "$(Windows_Host)" "YES"
821
822 install : install_mingw
823 .PHONY: install_mingw
824 install_mingw : $(INPLACE_MINGW)
825 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
826
827 install : install_perl
828 .PHONY: install_perl
829 install_perl : $(INPLACE_PERL)
830 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
831
832 endif # Windows_Host
833
834 ifneq "$(BINDIST)" "YES"
835 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
836 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
837 endif # BINDIST
838
839 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
840 $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \
841 | $$(dir $$@)/.
842 "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@
843
844 # -----------------------------------------------------------------------------
845 # Installation
846
847 install: install_libs install_packages install_libexecs \
848 install_bins install_libexec_scripts
849 ifeq "$(HADDOCK_DOCS)" "YES"
850 install: install_docs
851 endif
852
853 define installLibsTo
854 # $1 = libraries to install
855 # $2 = directory to install to
856 #
857 # The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because
858 # on Win64, "install -s" calls a strip that doesn't understand 64bit binaries.
859 # For some reason, this means the DLLs end up non-executable, which means
860 # executables that use them just segfault.
861 $(INSTALL_DIR) $2
862 for i in $1; do \
863 case $$i in \
864 *.a) \
865 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
866 $(RANLIB_CMD) $2/`basename $$i` ;; \
867 *.dll) \
868 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \
869 $(STRIP_CMD) $2/`basename $$i` ;; \
870 *.so) \
871 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \
872 *.dylib) \
873 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \
874 *) \
875 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
876 esac; \
877 done
878 endef
879
880 install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS)
881 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
882 ifneq "$(INSTALL_BINS)" ""
883 for i in $(INSTALL_BINS); do \
884 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
885 done
886 endif
887 ifneq "$(INSTALL_SCRIPTS)" ""
888 for i in $(INSTALL_SCRIPTS); do \
889 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
890 done
891 endif
892
893 install_libs: $(INSTALL_LIBS)
894 $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
895
896 # We rename ghc-stage2, so that the right program name is used in error
897 # messages etc. But not on windows.
898 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = YES
899 ifeq "$(Stage1Only) $(Windows_Host)" "YES YES"
900 # resulting ghc-stage1 is built to run on windows
901 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO
902 endif
903 ifeq "$(Stage1Only) $(Windows_Target)" "NO YES"
904 # resulting ghc-stage1 is built to run on windows
905 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO
906 endif
907
908 install_libexecs: $(INSTALL_LIBEXECS)
909 ifneq "$(INSTALL_LIBEXECS)" ""
910 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
911 for i in $(INSTALL_LIBEXECS); do \
912 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
913 done
914 ifeq "$(RENAME_LIBEXEC_GHC_STAGE_TO_GHC)" "YES"
915 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
916 endif
917 endif
918
919 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
920 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
921 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
922 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
923 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
924 done
925 endif
926
927 install_docs: $(INSTALL_DOCS)
928 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
929 ifneq "$(INSTALL_DOCS)" ""
930 for i in $(INSTALL_DOCS); do \
931 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
932 done
933 endif
934 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html"
935 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
936 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
937 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries"
938 for i in $(INSTALL_LIBRARY_DOCS); do \
939 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
940 done
941 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
942 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
943 endif
944 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
945 for i in $(INSTALL_HTML_DOC_DIRS); do \
946 $(CP) -Rp $$i "$(DESTDIR)$(docdir)/html"; \
947 done
948 endif
949
950 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
951
952 ifeq "$(BINDIST) $(CrossCompiling)" "NO YES"
953 # when installing ghc-stage2 we can't run target's
954 # 'ghc-pkg' and 'ghc-stage2' but those are needed for registration.
955 INSTALLED_GHC_REAL=$(TOP)/inplace/bin/ghc-stage1
956 INSTALLED_GHC_PKG_REAL=$(TOP)/$(ghc-pkg_DIST_BINARY)
957 else # CrossCompiling
958 # Install packages in the right order, so that ghc-pkg doesn't complain.
959 # Also, install ghc-pkg first.
960 ifeq "$(Windows_Host)" "NO"
961 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc
962 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg
963 else
964 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
965 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
966 endif
967 endif # CrossCompiling
968
969 # Set the INSTALL_DISTDIR_p for each package; compiler is special
970 $(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\
971 $(eval INSTALL_DISTDIR_$p = dist-install))
972 INSTALL_DISTDIR_compiler = stage2
973
974 # Now we can do the installation
975 install_packages: install_libexecs
976 install_packages: rts/dist/package.conf.install
977 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
978 $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
979 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
980 $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts"
981 $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts")
982 $(foreach p, $(INSTALL_PACKAGES), \
983 $(call make-command, \
984 "$(ghc-cabal_INPLACE)" copy \
985 $p $(INSTALL_DISTDIR_$p) \
986 "$(STRIP_CMD)" \
987 '$(DESTDIR)' \
988 '$(prefix)' \
989 '$(ghclibdir)' \
990 '$(docdir)/html/libraries' \
991 '$(GhcLibWays)'))
992 "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install
993 $(foreach p, $(INSTALL_PACKAGES), \
994 $(call make-command, \
995 "$(ghc-cabal_INPLACE)" register \
996 $p $(INSTALL_DISTDIR_$p) \
997 "$(INSTALLED_GHC_REAL)" \
998 "$(INSTALLED_GHC_PKG_REAL)" \
999 "$(DESTDIR)$(topdir)" \
1000 '$(DESTDIR)' \
1001 '$(prefix)' \
1002 '$(ghclibdir)' \
1003 '$(docdir)/html/libraries' \
1004 $(RelocatableBuild)))
1005 # when we install the packages above, ghc-pkg obeys umask when creating
1006 # the package.conf files, but for everything else we specify the
1007 # permissions. We therefore now fix the permissions of package.cache.
1008 # This means "sudo make install" does the right thing even if it runs
1009 # with an 077 umask.
1010 for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
1011
1012 # Finally, update package.cache to ensure it's newer than the registration
1013 # files. This avoids #13375.
1014 "$(INSTALLED_GHC_PKG_REAL)" --global-package-db "$(INSTALLED_PACKAGE_CONF)" recache
1015
1016 # -----------------------------------------------------------------------------
1017 # Binary distributions
1018
1019 ifneq "$(CLEANING)" "YES"
1020 # This rule seems to hold some files open on Windows which prevents
1021 # cleaning, perhaps due to the $(wildcard).
1022
1023 $(eval $(call bindist-list,.,\
1024 LICENSE \
1025 README \
1026 INSTALL \
1027 configure config.sub config.guess install-sh \
1028 settings.in \
1029 llvm-targets \
1030 llvm-passes \
1031 packages \
1032 Makefile \
1033 mk/config.mk.in \
1034 $(INPLACE_BIN)/mkdirhier \
1035 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
1036 $(BINDIST_WRAPPERS) \
1037 $(BINDIST_PERL_SOURCES) \
1038 $(BINDIST_LIBS) \
1039 $(BINDIST_HI) \
1040 $(BINDIST_EXTRAS) \
1041 $(includes_H_FILES) \
1042 $(includes_DERIVEDCONSTANTS) \
1043 $(includes_GHCCONSTANTS) \
1044 $(libffi_HEADERS) \
1045 $(INSTALL_LIBEXECS) \
1046 $(INSTALL_LIBEXEC_SCRIPTS) \
1047 $(INSTALL_BINS) \
1048 $(INSTALL_SCRIPTS) \
1049 $(INSTALL_MANPAGES) \
1050 $(INSTALL_DOCS) \
1051 $(INSTALL_LIBRARY_DOCS) \
1052 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
1053 docs/index.html \
1054 $(wildcard compiler/stage2/doc) \
1055 $(wildcard libraries/*/dist-install/doc/) \
1056 $(wildcard libraries/*/*/dist-install/doc/) \
1057 $(filter-out settings llvm-targets llvm-passes,$(INSTALL_LIBS)) \
1058 $(RTS_INSTALL_LIBS) \
1059 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
1060 mk/project.mk \
1061 mk/install.mk.in \
1062 bindist.mk \
1063 libraries/gen_contents_index \
1064 libraries/prologue.txt \
1065 ))
1066 endif
1067 # mk/project.mk gets an absolute path, so we manually include it in
1068 # the bindist with a relative path
1069
1070 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1071
1072 # Note [Persist CrossCompiling in binary distributions]
1073 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1074 #
1075 # The build system uses the CrossCompiling variable to decide whether or not we
1076 # should build various packages that must be built using the compiler.
1077 # Consequently, it is important that we persist its value in the binary
1078 # distribution so we know during `make install` not to go looking for files that
1079 # would have been built for these packages. Failing to do this causes #13325.
1080 #
1081 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
1082
1083 unix-binary-dist-prep:
1084 $(call removeTrees,bindistprep/)
1085 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1086 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in llvm-targets llvm-passes ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1087 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1088 echo "BUILD_SPHINX_HTML = $(BUILD_SPHINX_HTML)" >> $(BIN_DIST_MK)
1089 echo "BUILD_SPHINX_PDF = $(BUILD_SPHINX_PDF)" >> $(BIN_DIST_MK)
1090 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1091 echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
1092 echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK)
1093 # See Note [Persist CrossCompiling in binary distributions]
1094 echo "CrossCompiling = $(CrossCompiling)" >> $(BIN_DIST_MK)
1095 cd $(BIN_DIST_PREP_DIR) && autoreconf
1096 $(call removeFiles,$(BIN_DIST_PREP_TAR))
1097 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1098 # tree then we want to include the real file, not a symlink to it
1099 sort bindist-list | uniq > bindist-list.uniq
1100 cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list.uniq | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1101
1102 windows-binary-dist-prep:
1103 $(call removeTrees,bindistprep/)
1104 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1105 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1106
1107 # tryTimes tries to run its third argument multiple times, until it
1108 # succeeds. Don't call it directly; call try10Times instead.
1109 # The first and second argument to tryTimes are lists of values.
1110 # The length of the first argument is the number of times we have
1111 # already tried. The length of the second argument is the number more
1112 # times we will try.
1113 tryTimes = $(if $2, \
1114 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1115 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1116 )
1117
1118 # Try to run the argument 10 times. If all 10 fail, fail.
1119 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1120
1121 .PHONY: publish-binary-dist
1122 publish-binary-dist:
1123 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist)
1124
1125 ifeq "$(mingw32_TARGET_OS)" "1"
1126 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
1127 else
1128 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc
1129 endif
1130
1131 .PHONY: publish-docs
1132 publish-docs:
1133 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1134
1135 # -----------------------------------------------------------------------------
1136 # Source distributions
1137
1138 # Do it like this:
1139 #
1140 # $ ./boot
1141 # $ ./configure
1142 # $ make sdist
1143 #
1144
1145 # A source dist is built from a (partial) build tree, because we
1146 # require some extra files not contained in a git checkout: the
1147 # output from Happy and Alex, for example.
1148 #
1149 # The steps performed by 'make sdist' are as follows:
1150 # - build those extra files
1151 # - create a complete link-tree of the current build tree in /tmp
1152 # - run 'make distclean' on that tree
1153 # - remove a bunch of other files that we know shouldn't be in the dist
1154
1155 #
1156 # Directory in which we're going to build the src dist
1157 #
1158 SRC_DIST_ROOT = sdistprep
1159 SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)
1160
1161 SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
1162 SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
1163 SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
1164 SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT)
1165
1166 SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src
1167 SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs
1168 SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
1169 SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT)
1170
1171 SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
1172 SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
1173 SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
1174 SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT)
1175
1176 #
1177 # Files to include in source distributions
1178 #
1179 SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1180 utils docs rts compiler ghc driver libraries libffi-tarballs
1181 SRC_DIST_GHC_FILES += \
1182 configure.ac config.guess config.sub configure \
1183 aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \
1184 install-sh settings.in llvm-targets llvm-passes VERSION GIT_COMMIT_ID \
1185 boot packages ghc.mk MAKEHELP.md
1186
1187 .PHONY: VERSION
1188 VERSION:
1189 @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \
1190 then echo "$@ needs no update"; \
1191 else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi
1192
1193 .PHONY: GIT_COMMIT_ID
1194 GIT_COMMIT_ID:
1195 @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \
1196 echo "******************************************************************************"; \
1197 echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \
1198 echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \
1199 echo "Please re-run './configure' before creating source-distribution"; \
1200 echo "******************************************************************************"; \
1201 exit 1; \
1202 fi
1203 @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \
1204 then echo "$@ needs no update"; \
1205 else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi
1206
1207 sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID
1208
1209 # Extra packages which shouldn't be in the source distribution: see #8801
1210 EXTRA_PACKAGES=parallel
1211
1212 .PHONY: sdist-ghc-prep-tree
1213 sdist-ghc-prep-tree :
1214 $(call removeTrees,$(SRC_DIST_GHC_ROOT))
1215 $(call removeFiles,$(SRC_DIST_GHC_TARBALL))
1216 mkdir -p $(SRC_DIST_ROOT)
1217 mkdir -p $(SRC_DIST_GHC_ROOT)
1218 mkdir -p $(SRC_DIST_GHC_DIR)
1219 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1220 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
1221 cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
1222 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
1223 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
1224 $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
1225 $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
1226 for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done
1227 cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1228
1229 # Add files generated by alex and happy.
1230 # These rules depend on sdist-ghc-prep-tree.
1231 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x))
1232 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y))
1233 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x))
1234 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y))
1235 $(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y))
1236 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x))
1237 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y))
1238
1239 # Recent Cabal library versions have a pre-generated Lexer.hs in the source
1240 # repo, and have moved Lexer.x out of the way, so trying to generate it from
1241 # here no longer works, and is no longer necessary.
1242 # According to https://github.com/haskell/cabal/issues/4633 however, this is
1243 # only a temporary solution, so we will probably have to adjust to whatever
1244 # the proper solution is going to be once there is one.
1245 #
1246 # $(eval $(call sdist-ghc-file2,libraries/Cabal/Cabal,dist-install,Distribution/Parsec,Lexer,x))
1247
1248 .PHONY: sdist-ghc-prep
1249 sdist-ghc-prep : sdist-ghc-prep-tree
1250
1251 .PHONY: sdist-windows-tarballs-prep
1252 sdist-windows-tarballs-prep :
1253 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT))
1254 $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL))
1255 mkdir -p $(SRC_DIST_ROOT)
1256 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
1257 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)
1258 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
1259 cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs
1260 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git)
1261
1262 .PHONY: sdist-testsuite-prep
1263 sdist-testsuite-prep :
1264 $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
1265 $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
1266 mkdir -p $(SRC_DIST_ROOT)
1267 mkdir -p $(SRC_DIST_TESTSUITE_ROOT)
1268 mkdir -p $(SRC_DIST_TESTSUITE_DIR)
1269 mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite
1270 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
1271 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean
1272
1273 .PHONY: sdist-ghc
1274 sdist-ghc: sdist-ghc-prep
1275 cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL)
1276
1277 .PHONY: sdist-windows-tarballs
1278 sdist-windows-tarballs: sdist-windows-tarballs-prep
1279 cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
1280
1281 .PHONY: sdist-testsuite
1282 sdist-testsuite: sdist-testsuite-prep
1283 cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
1284
1285
1286 .PHONY: sdist
1287 sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite
1288
1289 sdist-manifest : $(SRC_DIST_GHC_TARBALL)
1290 tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1291
1292 # Upload the distribution(s)
1293 # Retrying is to work around buggy firewalls that corrupt large file transfers
1294 # over SSH.
1295 ifneq "$(PublishLocation)" ""
1296 publish-sdist :
1297 $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist)
1298 $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist)
1299 endif
1300
1301 # -----------------------------------------------------------------------------
1302 # sdisting libraries
1303
1304 # Use manually, with e.g.:
1305 # make sdist_directory
1306
1307 sdist_%:
1308 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1309
1310 # -----------------------------------------------------------------------------
1311 # Cleaning
1312
1313 .PHONY: clean
1314
1315 CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h
1316 CLEAN_FILES += libraries/base/include/EventConfig.h
1317 CLEAN_FILES += mk/config.mk.old
1318 CLEAN_FILES += mk/project.mk.old
1319 CLEAN_FILES += compiler/ghc.cabal.old
1320
1321 # These are no longer generated, but we still clean them for a while
1322 # as they may still be in old GHC trees:
1323 CLEAN_FILES += includes/GHCConstants.h
1324 CLEAN_FILES += includes/DerivedConstants.h
1325 CLEAN_FILES += includes/ghcautoconf.h
1326 CLEAN_FILES += includes/ghcplatform.h
1327 CLEAN_FILES += includes/ghcversion.h
1328 CLEAN_FILES += utils/ghc-pkg/Version.hs
1329 CLEAN_FILES += compiler/prelude/primops.txt
1330 CLEAN_FILES += $(wildcard compiler/primop*incl)
1331
1332 clean : clean_files clean_libraries
1333
1334 .PHONY: clean_files
1335 clean_files :
1336 $(call removeFiles,$(CLEAN_FILES))
1337 # this is here since CLEAN_FILES can't handle folders
1338 $(call removeTrees,includes/dist-derivedconstants)
1339 $(call removeTrees,inplace/bin)
1340 $(call removeTrees,inplace/lib)
1341 $(call removeTrees,libraries/bootstrapping.conf)
1342 # Clean the files that ./validate creates.
1343 $(call removeFiles,mk/are-validating.mk)
1344
1345 .PHONY: clean_libraries
1346 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
1347 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0))
1348
1349 clean_libraries:
1350 $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1351 $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))))
1352 $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1353 $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1354 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1355
1356 # We have to define a clean target for each library manually, because the
1357 # libraries/*/ghc.mk files are not included when we're cleaning.
1358 ifeq "$(CLEANING)" "YES"
1359 $(foreach lib,$(PACKAGES_STAGE0),\
1360 $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot)))
1361 $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\
1362 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1363 endif
1364
1365 clean : clean_haddock_index
1366 .PHONY: clean_haddock_index
1367 clean_haddock_index:
1368 $(call removeTrees,libraries/dist-haddock)
1369
1370 clean : clean_bindistprep
1371 .PHONY: clean_bindistprep
1372 clean_bindistprep:
1373 $(call removeTrees,bindistprep/)
1374
1375 distclean : clean
1376 # Clean the files that we ask ./configure to create.
1377 $(call removeFiles,mk/config.mk)
1378 $(call removeFiles,mk/install.mk)
1379 $(call removeFiles,mk/project.mk)
1380 $(call removeFiles,compiler/ghc.cabal)
1381 $(call removeFiles,ghc/ghc-bin.cabal)
1382 $(call removeFiles,libraries/ghci/ghci.cabal)
1383 $(call removeFiles,utils/runghc/runghc.cabal)
1384 $(call removeFiles,utils/gen-dll/gen-dll.cabal)
1385 $(call removeFiles,settings)
1386 $(call removeFiles,docs/users_guide/ug-book.xml)
1387 $(call removeFiles,docs/users_guide/ug-ent.xml)
1388 $(call removeFiles,docs/users_guide/ghc_config.py)
1389 $(call removeFiles,docs/index.html)
1390 $(call removeFiles,libraries/prologue.txt)
1391 $(call removeFiles,distrib/configure.ac)
1392 $(call removeFiles,ch01.html ch02.html index.html)
1393
1394 # ./configure also makes these.
1395 $(call removeFiles,mk/config.h)
1396
1397 # Internal files generated by ./configure for itself.
1398 $(call removeFiles,config.cache config.status config.log)
1399
1400 # The root Makefile makes .old versions of some files that configure
1401 # generates, so we clean those too.
1402 $(call removeFiles,mk/config.mk.old)
1403 $(call removeFiles,mk/project.mk.old)
1404 $(call removeFiles,compiler/ghc.cabal.old)
1405
1406 # Clean the *Config.h files generated by library configure scripts
1407 $(call removeFiles,libraries/base/include/HsBaseConfig.h)
1408 $(call removeFiles,libraries/base/include/EventConfig.h)
1409 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
1410 $(call removeFiles,libraries/process/include/HsProcessConfig.h)
1411 $(call removeFiles,libraries/unix/include/HsUnixConfig.h)
1412 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h)
1413
1414 # The library configure scripts also like creating autom4te.cache
1415 # directories, so clean them all up.
1416 $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1417
1418 # We make these when making or testing bindists
1419 $(call removeFiles,bindist-list)
1420 $(call removeFiles,bindist-list.uniq)
1421 $(call removeTrees,bindisttest/a)
1422
1423 # Not sure why this is being cleaned here.
1424 $(call removeTrees,includes/dist-derivedconstants)
1425
1426 # Also clean Windows-only inplace directories.
1427 # Don't delete 'inplace' itself, it contains source files.
1428 $(call removeTrees,inplace/mingw)
1429 $(call removeTrees,inplace/perl)
1430
1431 # Remove the fs utilities.
1432 $(call removeFiles,utils/lndir/fs.h)
1433 $(call removeFiles,utils/lndir/fs.c)
1434 $(call removeFiles,utils/unlit/fs.h)
1435 $(call removeFiles,utils/unlit/fs.c)
1436 $(call removeFiles,rts/fs.h)
1437 $(call removeFiles,rts/fs.c)
1438 $(call removeFiles,libraries/base/include/fs.h)
1439 $(call removeFiles,libraries/base/cbits/fs.c)
1440
1441 maintainer-clean : distclean
1442 $(call removeFiles,configure mk/config.h.in)
1443 $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache))
1444 $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \
1445 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1446 $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1447 $(call removeFiles,$(patsubst %, libraries/%/configure, \
1448 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1449 $(call removeFiles,libraries/base/include/HsBaseConfig.h.in)
1450 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
1451 $(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
1452 $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
1453 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in)
1454
1455 .PHONY: all_libraries
1456
1457 .PHONY: bootstrapping-files
1458 # See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting
1459 bootstrapping-files: $(includes_H_CONFIG)
1460 bootstrapping-files: $(includes_DERIVEDCONSTANTS)
1461 bootstrapping-files: $(includes_GHCCONSTANTS)
1462 bootstrapping-files: $(libffi_HEADERS)
1463
1464 .DELETE_ON_ERROR:
1465
1466 # -----------------------------------------------------------------------------
1467
1468 ifeq "$(HADDOCK_DOCS)" "YES"
1469 BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock"
1470 endif
1471 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
1472 BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla
1473 else
1474 BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared
1475 endif
1476 BINDIST_LIBRARY_FLAGS += --disable-library-prof
1477
1478 .PHONY: validate_build_xhtml
1479 validate_build_xhtml:
1480 cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup
1481 cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)"
1482 cd libraries/xhtml && ./Setup build --builddir=dist-bindist
1483 ifeq "$(HADDOCK_DOCS)" "YES"
1484 cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
1485 endif
1486 cd libraries/xhtml && ./Setup install --builddir=dist-bindist
1487 cd libraries/xhtml && ./Setup clean --builddir=dist-bindist
1488 cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
1489
1490 # Note [No stage2 packages when CrossCompiling or Stage1Only]
1491 #
1492 # (first read Note [CrossCompiling vs Stage1Only] and
1493 # Note [Stage1Only vs stage=1] in mk/config.mk.in)
1494 #
1495 # When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the
1496 # following packages from the build:
1497 # * packages that we build with ghc-stage2 [1]
1498 # * packages that depend on the ghc library [2]
1499 #
1500 # Here's why:
1501 # - first of all, ghc-stage1 can't use stage0's ghc library (it's too old)
1502 # - neither do we register the ghc library (compiler/stage1) that we build
1503 # with stage0. TODO Why not? We do build it...
1504 # - as a result, we need to a) use ghc-stage2 to build packages that depend on
1505 # the ghc library and b) exclude those packages when ghc-stage2 is not
1506 # available.
1507 # - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just
1508 # said we didn't want it), so we have to exclude the stage2 packages from
1509 # the build. This includes the case where Stage1Only=YES is combined with
1510 # CrossCompiling=YES (Building GHC as a cross-compiler [3]).
1511 # - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself
1512 # [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't
1513 # run on the host platform at all; it is built to run on $(TARGETPLATFORM)"
1514 # [4]. Therefore in this case we also have to exclude the stage2 packages
1515 # from the build.
1516 #
1517 # Because we omit certain packages from the build when CrossCompiling=YES,
1518 # it is important that we remember the value of CrossCompiling in binary
1519 # distributions that we produce. See Note [Persist CrossCompiling in binary
1520 # distributions].
1521 #
1522 # [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2'
1523 #
1524 # [2]
1525 # find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)'
1526 #
1527 # [3] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
1528 #
1529 # [4] * bc31dbe8ee22819054df60f5ef219fed393a1c54
1530 # "Disable any packages built with stage 2 when cross-compiling
1531 # Since we can't run stage 2 on the host."
1532 #
1533 # * 72995160b0b190577b5c0cb8d7bd0426cc455b05
1534 # "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)"
1535
1536 # -----------------------------------------------------------------------------
1537 # Numbered phase targets
1538
1539 # In phase 1, we'll be building dependency files for most things
1540 # built by the bootstrapping compiler while make is 'include'ing
1541 # makefiles. But in order to build dependency files, we'll need to
1542 # build any automatically generated .hs files, which means that
1543 # we'll need to be able to build any tools that generate .hs files
1544 # etc. But in order to do that, we need to already know the
1545 # dependencies for those tools, so we build their dependency files
1546 # here.
1547 .PHONY: phase_0_builds
1548 # hsc2hs is needed, e.g. to make the .hs files for hpc.
1549 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1550 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1551 # genprimopcode is needed to make the .hs-incl files that are in the
1552 # ghc package.
1553 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1554 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1555 # deriveConstants is used to create header files included in the
1556 # ghc package.
1557 phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell)
1558 phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm)
1559
1560 .PHONY: phase_1_builds
1561 phase_1_builds: $(PACKAGE_DATA_MKS)