Build system: remove hack for Mac OSX in configure.ac (#10476)
[ghc.git] / ghc.mk
1 # -----------------------------------------------------------------------------
2 #
3 # (c) 2009-2013 The University of Glasgow
4 #
5 # This file is part of the GHC build system.
6 #
7 # To understand how the build system works and how to modify it, see
8 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
10 #
11 # -----------------------------------------------------------------------------
12
13 # ToDo List.
14 #
15 # * remove old Makefiles, add new stubs for building in subdirs
16 # * docs/Makefile
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/man/Makefile
19 # * docs/storage-mgmt/Makefile
20 # * docs/vh/Makefile
21 # * rts/dotnet/Makefile
22 # * utils/Makefile
23 # * add Makefiles for the rest of the utils/ programs that aren't built
24 # by default (need to exclude them from 'make all' too)
25
26 # Possible cleanups:
27 #
28 # * per-source-file dependencies instead of one .depend file?
29 # * eliminate undefined variables, and use --warn-undefined-variables?
30 # * put outputs from different ways in different subdirs of distdir/build,
31 # then we don't have to use -osuf/-hisuf. We would have to install
32 # them in different places too, so we'd need ghc-pkg support for packages
33 # of different ways.
34 # * make PACKAGES_STAGE1 generated by './configure' or './boot'?
35 # * we should use a directory of package.conf files rather than a single
36 # file for the inplace package database, so that we can express
37 # dependencies more accurately. Otherwise it's possible to get into
38 # a state where the package database is out of date, and the build
39 # system doesn't know.
40
41 # Approximate build order.
42 #
43 # The actual build order is defined by dependencies, and the phase
44 # ordering used to ensure correct ordering of makefile-generation; see
45 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
46 #
47 # * With bootstrapping compiler:
48 # o Build utils/ghc-cabal
49 # o Build utils/ghc-pkg
50 # o Build utils/hsc2hs
51 # o Build utils/genprimopcode
52 # o Build utils/deriveConstants
53 # * For each package:
54 # o configure, generate package-data.mk and inplace-pkg-config
55 # o register each package into inplace/lib/package.conf
56 # * build libffi (if not disabled by --with-system-libffi)
57 # * With bootstrapping compiler:
58 # o Build libraries/{filepath,hpc,Cabal}
59 # o Build compiler (stage 1)
60 # * With stage 1 compiler:
61 # o Build libraries/*
62 # o Build rts
63 # o Build utils/* (except haddock)
64 # o Build compiler (stage 2)
65 # * With stage 2 compiler:
66 # o Build utils/haddock
67 # o Build compiler (stage 3) (optional)
68 # * With haddock:
69 # o libraries/*
70 # o compiler
71
72 .PHONY: default all haddock
73
74 # We need second expansion for the way we handle directories, so that
75 # | $$$$(dir $$$$@)/.
76 # expands to the directory of a rule that uses a % pattern.
77 .SECONDEXPANSION:
78
79 default : all
80
81
82 ##################################################
83 # Check that we have a new enough 'make'
84
85 HAVE_EVAL := NO
86 $(eval HAVE_EVAL := YES)
87
88 ifeq "$(HAVE_EVAL)" "NO"
89 $(error Your make does not support eval. You need GNU make >= 3.81)
90 endif
91
92 ifeq "$(abspath /)" ""
93 $(error Your make does not support abspath. You need GNU make >= 3.81)
94 endif
95 ##################################################
96
97
98 # Catch make if it runs away into an infinite loop
99 ifeq "$(MAKE_RESTARTS)" ""
100 else ifeq "$(MAKE_RESTARTS)" "1"
101 else
102 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
103 endif
104
105 # -----------------------------------------------------------------------------
106 # Misc GNU make utils
107
108 nothing=
109 space=$(nothing) $(nothing)
110 comma=,
111
112 # -----------------------------------------------------------------------------
113 # Makefile debugging
114 #
115 # to see the effective value used for a Makefile variable, do
116 # make show VALUE=MY_VALUE
117 #
118
119 show:
120 @echo '$(VALUE)="$($(VALUE))"'
121
122 # echo is used by the nightly builders to query the build system for
123 # information.
124 # Using printf means that we don't get a trailing newline. We escape
125 # backslashes and double quotes in the string to protect them from the
126 # shell, and percent signs to protect them from printf.
127 echo:
128 @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))"
129
130 # -----------------------------------------------------------------------------
131 # Include subsidiary build-system bits
132
133 include mk/tree.mk
134
135 ifneq "$(CLEANING)" "YES"
136 include mk/config.mk
137 ifeq "$(ProjectVersion)" ""
138 $(error Please run ./configure first)
139 endif
140 endif
141
142 include mk/ways.mk
143 include mk/warnings.mk
144
145 # (Optional) build-specific configuration
146 include mk/custom-settings.mk
147 SRC_CC_OPTS += $(WERROR)
148 SRC_HC_OPTS += $(WERROR)
149
150 ifneq "$(CLEANING)" "YES"
151 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
152 ifeq "$(findstring dyn,$(GhcLibWays))" ""
153 $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
154 endif
155 else
156 ifeq "$(findstring v,$(GhcLibWays))" ""
157 $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
158 endif
159 endif
160 ifeq "$(GhcProfiled)" "YES"
161 ifeq "$(findstring p,$(GhcLibWays))" ""
162 $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
163 endif
164 endif
165 endif
166
167 ifeq "$(phase)" ""
168 phase = final
169 endif
170
171 # -----------------------------------------------------------------------------
172 # Utility definitions
173
174 include rules/prof.mk
175 include rules/trace.mk
176 include rules/library-path.mk
177 include rules/add-dependency.mk
178 include rules/make-command.mk
179 include rules/pretty_commands.mk
180
181 # -----------------------------------------------------------------------------
182 # Macros for standard targets
183
184 include rules/all-target.mk
185 include rules/clean-target.mk
186
187 # -----------------------------------------------------------------------------
188 # The inplace tree
189
190 $(eval $(call clean-target,root,inplace,inplace/bin inplace/lib))
191
192 # -----------------------------------------------------------------------------
193 # Whether to build dependencies or not
194
195 # When we're just doing 'make clean' or 'make show', then we don't need
196 # to build dependencies.
197
198 ifeq "$(CLEANING)" "YES"
199 NO_INCLUDE_DEPS = YES
200 NO_INCLUDE_PKGDATA = YES
201 endif
202 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
203 NO_INCLUDE_DEPS = YES
204 NO_INCLUDE_PKGDATA = YES
205 endif
206 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
207 NO_INCLUDE_DEPS = YES
208 # We want package-data.mk for show
209 endif
210
211 # -----------------------------------------------------------------------------
212 # Ways
213
214 include rules/way-prelims.mk
215
216 $(foreach way,$(ALL_WAYS),\
217 $(eval $(call way-prelims,$(way))))
218
219 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
220 GHCI_WAY = dyn
221 HADDOCK_WAY = dyn
222 else
223 GHCI_WAY = v
224 HADDOCK_WAY = v
225 endif
226
227 WINDOWS_DYN_PROG_RTS := rts
228 ifeq "$(GhcThreaded)" "YES"
229 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr
230 endif
231 ifeq "$(GhcDebugged)" "YES"
232 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
233 endif
234 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE
235
236 # -----------------------------------------------------------------------------
237 # Compilation Flags
238
239 include rules/distdir-opts.mk
240 include rules/distdir-way-opts.mk
241
242 # -----------------------------------------------------------------------------
243 # Finding source files and object files
244
245 include rules/hs-sources.mk
246 include rules/c-sources.mk
247 include rules/includes-sources.mk
248 include rules/hs-objs.mk
249 include rules/c-objs.mk
250 include rules/cmm-objs.mk
251
252 # -----------------------------------------------------------------------------
253 # Suffix rules
254
255 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
256 # so we don't make any when cleaning.
257 ifneq "$(CLEANING)" "YES"
258 include rules/hs-suffix-rules-srcdir.mk
259 include rules/hs-suffix-way-rules-srcdir.mk
260 include rules/hs-suffix-way-rules.mk
261 include rules/hi-rule.mk
262 include rules/c-suffix-rules.mk
263 include rules/cmm-suffix-rules.mk
264 endif
265
266 # -----------------------------------------------------------------------------
267 # Building package-data.mk files from .cabal files
268
269 include rules/package-config.mk
270
271 # -----------------------------------------------------------------------------
272 # Building dependencies
273
274 include rules/dependencies.mk
275 include rules/build-dependencies.mk
276 include rules/include-dependencies.mk
277
278 # -----------------------------------------------------------------------------
279 # Build package-data.mk files
280
281 include rules/build-package-data.mk
282
283 # -----------------------------------------------------------------------------
284 # Build and install a program
285
286 include rules/build-prog.mk
287 include rules/shell-wrapper.mk
288
289 # -----------------------------------------------------------------------------
290 # Build a perl script
291
292 include rules/build-perl.mk
293
294 # -----------------------------------------------------------------------------
295 # Build a package
296
297 include rules/build-package.mk
298 include rules/build-package-way.mk
299 include rules/haddock.mk
300 include rules/tags-package.mk
301 include rules/foreachLibrary.mk
302
303 # -----------------------------------------------------------------------------
304 # Registering hand-written package descriptions (used in rts)
305
306 include rules/manual-package-config.mk
307
308 # -----------------------------------------------------------------------------
309 # Docs
310
311 include rules/docbook.mk
312
313 # -----------------------------------------------------------------------------
314 # Making bindists and sdists
315
316 include rules/bindist.mk
317 include rules/sdist-ghc-file.mk
318
319 # -----------------------------------------------------------------------------
320 # Directories
321
322 # Don't try to delete directories:
323 .PRECIOUS: %/.
324
325 # Create build directories on demand. NB. the | below: this indicates
326 # that $(MKDIRHIER) is an order-only dependency, which means that this
327 # rule fires after building mkdirhier, but we won't try to recreate
328 # directories if mkdirhier changes.
329 %/. : | $(MKDIRHIER)
330 "$(MKDIRHIER)" $@
331
332 # -----------------------------------------------------------------------------
333 # Lax dependencies
334
335 ifeq "$(LAX_DEPENDENCIES)" "YES"
336 LAX_DEPS_FOLLOW = |
337 else
338 LAX_DEPS_FOLLOW =
339 endif
340
341 # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
342 # looking like
343 # target: a | b | c
344 # The first | signals the start of the order-only dependencies, but make
345 # treats the second | as a dependency. So we need to tell make how to
346 # build that dependency.
347
348 .PHONY: |
349 | :
350 @:
351
352 # -----------------------------------------------------------------------------
353 # Packages to build
354 # The lists of packages that we *actually* going to build in each stage:
355 #
356 # $(PACKAGES_STAGE0)
357 # $(PACKAGES_STAGE1)
358 # $(PACKAGES_STAGE2)
359 #
360 # Note that we need to add them to these variables in dependency
361 # order, as this is the order that they get configured in.
362
363 ifeq "$(CLEANING)" "YES"
364
365 define addLibraryForCleaning
366 # We just add all packages to both the stage 0 and stage 1 lists.
367 # Stage 2 gets cleaned in the same way as stage 1, so no need to
368 # add it there.
369 PACKAGES_STAGE0 += $1
370 PACKAGES_STAGE1 += $1
371 endef
372 $(eval $(call foreachLibrary,addLibraryForCleaning))
373
374 else # CLEANING
375
376 # Packages that are built by stage0. These packages are dependencies of
377 # programs such as GHC and ghc-pkg, that we do not assume the stage0
378 # compiler already has installed (or up-to-date enough).
379
380 PACKAGES_STAGE0 = binary Cabal/Cabal hpc bin-package-db hoopl transformers template-haskell
381 ifeq "$(Windows_Host)" "NO"
382 ifneq "$(HostOS_CPP)" "ios"
383 PACKAGES_STAGE0 += terminfo
384 endif
385 endif
386
387 PACKAGES_STAGE1 += ghc-prim
388 PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
389 PACKAGES_STAGE1 += base
390 PACKAGES_STAGE1 += filepath
391 PACKAGES_STAGE1 += array
392 PACKAGES_STAGE1 += deepseq
393 PACKAGES_STAGE1 += bytestring
394 PACKAGES_STAGE1 += containers
395
396 ifeq "$(Windows_Host)" "YES"
397 PACKAGES_STAGE1 += Win32
398 endif
399 PACKAGES_STAGE1 += time
400 ifeq "$(Windows_Host)" "NO"
401 PACKAGES_STAGE1 += unix
402 endif
403
404 PACKAGES_STAGE1 += directory
405 PACKAGES_STAGE1 += process
406 PACKAGES_STAGE1 += hpc
407 PACKAGES_STAGE1 += pretty
408 PACKAGES_STAGE1 += template-haskell
409 PACKAGES_STAGE1 += binary
410 PACKAGES_STAGE1 += Cabal/Cabal
411 PACKAGES_STAGE1 += bin-package-db
412 PACKAGES_STAGE1 += hoopl
413 PACKAGES_STAGE1 += transformers
414
415 ifeq "$(HADDOCK_DOCS)" "YES"
416 PACKAGES_STAGE1 += xhtml
417 endif
418
419 ifeq "$(Windows_Target)" "NO"
420 ifneq "$(TargetOS_CPP)" "ios"
421 PACKAGES_STAGE1 += terminfo
422 endif
423 endif
424 PACKAGES_STAGE1 += haskeline
425
426 # We normally install only the packages down to this point
427 REGULAR_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
428 ifneq "$(Stage1Only)" "YES"
429 REGULAR_INSTALL_PACKAGES += compiler
430 endif
431 REGULAR_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
432
433 ifneq "$(CrossCompiling)" "YES"
434 define addExtraPackage
435 ifeq "$2" "-"
436 # Do nothing; this package is already handled above
437 else ifeq "$2" "dph"
438 ifeq "$$(BUILD_DPH) $$(GhcProfiled)" "YES NO"
439 # The DPH packages need TH, which is incompatible with a profiled GHC.
440 PACKAGES_STAGE2 += $1
441 endif
442 else ifeq "$2" "extra"
443 ifeq "$$(BUILD_EXTRA_PKGS)" "YES"
444 PACKAGES_STAGE2 += $1
445 endif
446 else
447 $$(error Unknown package tag: $2)
448 endif
449 endef
450 $(eval $(call foreachLibrary,addExtraPackage))
451 endif
452
453 # If we want to just install everything, then we want all the packages
454 SUPERSIZE_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
455 ifneq "$(Stage1Only)" "YES"
456 SUPERSIZE_INSTALL_PACKAGES += compiler
457 endif
458 SUPERSIZE_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
459
460 ifeq "$(InstallExtraPackages)" "NO"
461 INSTALL_PACKAGES := $(REGULAR_INSTALL_PACKAGES)
462 else
463 INSTALL_PACKAGES := $(SUPERSIZE_INSTALL_PACKAGES)
464 endif
465
466 endif # CLEANING
467
468 # -------------------------------------------
469 # Dependencies between package-data.mk files
470
471 # We cannot run ghc-cabal to configure a package until we have
472 # configured and registered all of its dependencies. So the following
473 # hack forces all the configure steps to happen in exactly the following order:
474 #
475 # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
476 #
477 # Ideally we should use the correct dependencies here to allow more
478 # parallelism, but we don't know the dependencies until we've
479 # generated the package-data.mk files.
480 define fixed_pkg_dep
481 libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev)
482 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
483 endef
484
485 ifneq "$(BINDIST)" "YES"
486 fixed_pkg_prev=
487 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
488
489 # the GHC package doesn't live in libraries/, so we add its dependency manually:
490 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
491 fixed_pkg_prev:=compiler/stage2/package-data.mk
492
493 # and continue with PACKAGES_STAGE2, which depend on GHC:
494 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
495
496 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
497 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
498 # haddock depends on ghc and some libraries, but depending on GHC's
499 # package-data.mk is sufficient, as that in turn depends on all the
500 # libraries
501 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
502 utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
503 utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
504
505 utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
506 utils/dll-split/dist-install/package-data.mk: compiler/stage2/package-data.mk
507 utils/hpc/dist-install/package-data.mk: compiler/stage2/package-data.mk
508 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
509 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
510 utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
511 utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
512 utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
513
514 # add the final package.conf dependency: ghc-prim depends on RTS
515 libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace
516 endif
517
518 # --------------------------------
519 # Misc package-related settings
520
521 # Run Haddock for the packages that will be installed. We need to handle
522 # compiler specially due to the different dist directory name.
523 $(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES))
524 compiler_stage2_DO_HADDOCK = YES
525
526 BOOT_PKG_CONSTRAINTS := \
527 $(foreach d,$(PACKAGES_STAGE0),\
528 $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
529 --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
530
531 # The actual .a and .so/.dll files: needed for dependencies.
532 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_v_LIB))
533 ifeq "$(BuildSharedLibs)" "YES"
534 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
535 endif
536 BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
537
538 # ----------------------------------------
539 # Special magic for the ghc-prim package
540
541 # We want the ghc-prim package to include the GHC.Prim module when it
542 # is registered, but not when it is built, because GHC.Prim is not a
543 # real source module, it is built-in to GHC. The old build system did
544 # this using Setup.hs, but we can't do that here, so we have a flag to
545 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
546 # remains compatible with the old build system for the time being).
547 # GHC.Prim module in the ghc-prim package with a flag:
548 #
549 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
550
551 # And then we strip it out again before building the package:
552 define libraries/ghc-prim_PACKAGE_MAGIC
553 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
554 endef
555
556 PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt
557
558 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/.
559 "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@
560
561 # Required so that Haddock documents the primops.
562 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
563
564 # ----------------------------------------
565 # Special magic for the integer package
566
567 ifneq "$(CLEANING)" "YES"
568 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
569 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp
570 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
571 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
572 else
573 $(error Unknown integer library: $(INTEGER_LIBRARY))
574 endif
575 endif
576
577 # -----------------------------------------------------------------------------
578 # Include build instructions from all subdirs
579
580 ifneq "$(BINDIST)" "YES"
581 BUILD_DIRS += utils/mkdirhier
582 endif
583
584 ifeq "$(Windows_Host)" "YES"
585 BUILD_DIRS += utils/touchy
586 endif
587
588 BUILD_DIRS += utils/unlit
589 BUILD_DIRS += utils/hp2ps
590
591 ifneq "$(GhcUnregisterised)" "YES"
592 BUILD_DIRS += driver/split
593 endif
594
595 ifneq "$(BINDIST)" "YES"
596 BUILD_DIRS += utils/genprimopcode
597 endif
598
599 BUILD_DIRS += driver
600 BUILD_DIRS += driver/ghci
601 BUILD_DIRS += driver/ghc
602 BUILD_DIRS += driver/haddock
603 BUILD_DIRS += libffi
604 BUILD_DIRS += utils/deriveConstants
605 BUILD_DIRS += includes
606 BUILD_DIRS += rts
607
608 ifneq "$(BINDIST)" "YES"
609 BUILD_DIRS += bindisttest
610 BUILD_DIRS += utils/genapply
611 endif
612
613 # When cleaning, don't add any library packages to BUILD_DIRS. We include
614 # ghc.mk files for all BUILD_DIRS, but they don't exist until after running
615 # `./boot`. Running `make clean` before anything else, as well as running
616 # `make maintainer-clean` twice, should work.
617 ifneq "$(CLEANING)" "YES"
618 # These are deliberately in reverse order, so as to ensure that
619 # there is no need to have them in dependency order. That's important
620 # because it's tricky to ensure that they are in dependency order when
621 # cross-compiling, as some packages may only be in PACKAGES_STAGE0
622 # or PACKAGES_STAGE1.
623 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
624 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
625 BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
626 ifeq "$(BUILD_DPH)" "YES"
627 # Note: `$(eval $(call foreachLibrary,addExtraPackage))` above adds the
628 # packages listed in `libraries/dph/ghc-packages` (e.g. dph-base) to
629 # PACKAGES_STAGE2. But not 'libraries/dph' itself (it doesn't have a cabal
630 # file). Since it does have a ghc.mk file, we add it to BUILD_DIRS here.
631 BUILD_DIRS += $(wildcard libraries/dph)
632 endif
633 endif
634
635
636 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
637 BUILD_DIRS += libraries/integer-gmp/gmp
638 else ifeq "$(CLEANING)" "YES"
639 BUILD_DIRS += libraries/integer-gmp/gmp
640 endif
641
642 ifeq "$(HADDOCK_DOCS)" "YES"
643 BUILD_DIRS += utils/haddock
644 BUILD_DIRS += utils/haddock/doc
645 else ifeq "$(CLEANING)" "YES"
646 BUILD_DIRS += utils/haddock
647 BUILD_DIRS += utils/haddock/doc
648 endif
649
650 BUILD_DIRS += compiler
651 BUILD_DIRS += utils/hsc2hs
652 BUILD_DIRS += utils/ghc-pkg
653 BUILD_DIRS += utils/testremove
654 ifneq "$(Stage1Only)" "YES"
655 BUILD_DIRS += utils/ghctags
656 endif
657 BUILD_DIRS += utils/dll-split
658 BUILD_DIRS += utils/ghc-pwd
659 BUILD_DIRS += utils/ghc-cabal
660 BUILD_DIRS += utils/hpc
661 ifeq "$(GhcWithInterpreter)" "YES"
662 BUILD_DIRS += utils/runghc
663 else ifeq "$(CLEANING)" "YES"
664 BUILD_DIRS += utils/runghc
665 endif
666 BUILD_DIRS += ghc
667
668 ifneq "$(BINDIST)" "YES"
669 ifneq "$(CrossCompiling)-$(phase)" "YES-final"
670 BUILD_DIRS += utils/mkUserGuidePart
671 endif
672 endif
673
674 BUILD_DIRS += docs/users_guide
675 BUILD_DIRS += docs/man
676 BUILD_DIRS += utils/count_lines
677 BUILD_DIRS += utils/compare_sizes
678
679 # ----------------------------------------------
680 # Actually include all the sub-ghc.mk's
681
682 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
683
684 # A useful pseudo-target (must be after the include above, because it needs
685 # the value of things like $(libraries/base_dist-install_v_LIB).
686 .PHONY: stage1_libs
687 stage1_libs : $(ALL_STAGE1_LIBS)
688
689 # ----------------------------------------------
690 # Per-package compiler flags
691 #
692 # If you want to add per-package compiler flags, see `mk/warnings.mk`.
693
694 # Add $(GhcLib(Extra)HcOpts) to all package builds
695 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
696 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts)))
697
698 # Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds
699 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
700 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts)))
701
702 # -----------------------------------------------------------------------------
703 # Bootstrapping libraries
704
705 # We need to build a few libraries with the installed GHC, since GHC itself
706 # and some of the tools depend on them:
707
708 ifneq "$(BINDIST)" "YES"
709
710 ifneq "$(BOOTSTRAPPING_CONF)" ""
711 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
712 $(shell $(GHC_PKG) init $(BOOTSTRAPPING_CONF))
713 endif
714 endif
715
716 $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
717
718 # register the boot packages in strict sequence, because running
719 # multiple ghc-pkgs in parallel doesn't work (registrations may get
720 # lost).
721 fixed_pkg_prev=
722 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
723 utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
724 compiler/stage1/package-data.mk: $(fixed_pkg_prev)
725 endif
726
727 ifneq "$(BINDIST)" "YES"
728 # Make sure we have all the GHCi libs by the time we've built
729 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
730 # GHCi libs, and we don't have a better way to express that dependency.
731 #
732 GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
733 $(compiler_stage2_GHCI_LIB)
734
735 ifeq "$(UseArchivesForGhci)" "NO"
736 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
737 endif
738
739 ifeq "$(UseArchivesForGhci)" "YES"
740 GHCI_lib_way = v
741 else
742 GHCI_lib_way = GHCI
743 endif
744
745 # Deps for TH uses in libraries
746 $(foreach way, $(GhcLibWays),$(eval \
747 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
748 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
749 ))
750 endif
751
752 # -----------------------------------------------
753 # Haddock-related bits
754
755 # Build the Haddock contents and index
756 ifeq "$(HADDOCK_DOCS)" "YES"
757 libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES)
758 cd libraries && sh gen_contents_index --intree
759 ifeq "$(phase)" "final"
760 $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
761 endif
762 INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
763 endif
764
765 # -----------------------------------------------------------------------------
766 # Creating a local mingw copy on Windows
767
768 ifeq "$(Windows_Host)" "YES"
769
770 install : install_mingw
771 .PHONY: install_mingw
772 install_mingw : $(INPLACE_MINGW)
773 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
774
775 install : install_perl
776 .PHONY: install_perl
777 install_perl : $(INPLACE_PERL)
778 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
779
780 endif # Windows_Host
781
782 ifneq "$(BINDIST)" "YES"
783 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
784 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
785 endif # BINDIST
786
787 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
788 $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \
789 | $$(dir $$@)/.
790 "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@
791
792 .PHONY: tags
793 tags: tags_compiler
794
795 .PHONY: TAGS
796 TAGS: TAGS_compiler
797
798 # -----------------------------------------------------------------------------
799 # Installation
800
801 install: install_libs install_packages install_libexecs \
802 install_bins install_topdirs
803 ifeq "$(HADDOCK_DOCS)" "YES"
804 install: install_docs
805 endif
806
807 define installLibsTo
808 # $1 = libraries to install
809 # $2 = directory to install to
810 #
811 # The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because
812 # on Win64, "install -s" calls a strip that doesn't understand 64bit binaries.
813 # For some reason, this means the DLLs end up non-executable, which means
814 # executables that use them just segfault.
815 $(INSTALL_DIR) $2
816 for i in $1; do \
817 case $$i in \
818 *.a) \
819 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
820 $(RANLIB_CMD) $2/`basename $$i` ;; \
821 *.dll) \
822 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \
823 $(STRIP_CMD) $2/`basename $$i` ;; \
824 *.so) \
825 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \
826 *.dylib) \
827 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \
828 *) \
829 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
830 esac; \
831 done
832 endef
833
834 install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS)
835 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
836 for i in $(INSTALL_BINS); do \
837 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
838 done
839 for i in $(INSTALL_SCRIPTS); do \
840 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
841 done
842
843 install_libs: $(INSTALL_LIBS)
844 $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
845
846 install_libexecs: $(INSTALL_LIBEXECS)
847 ifeq "$(INSTALL_LIBEXECS)" ""
848 @:
849 else
850 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
851 for i in $(INSTALL_LIBEXECS); do \
852 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
853 done
854 # We rename ghc-stage2, so that the right program name is used in error
855 # messages etc.
856 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
857 endif
858
859 install_topdirs: $(INSTALL_TOPDIR_BINS) $(INSTALL_TOPDIR_SCRIPTS)
860 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
861 for i in $(INSTALL_TOPDIR_BINS); do \
862 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
863 done
864 for i in $(INSTALL_TOPDIR_SCRIPTS); do \
865 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(topdir)"; \
866 done
867
868 install_docs: $(INSTALL_DOCS)
869 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
870 ifneq "$(INSTALL_DOCS)" ""
871 for i in $(INSTALL_DOCS); do \
872 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
873 done
874 endif
875 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html"
876 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
877 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
878 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries"
879 for i in $(INSTALL_LIBRARY_DOCS); do \
880 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
881 done
882 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
883 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
884 endif
885 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
886 for i in $(INSTALL_HTML_DOC_DIRS); do \
887 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
888 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
889 done
890 endif
891
892 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
893
894 # Install packages in the right order, so that ghc-pkg doesn't complain.
895 # Also, install ghc-pkg first.
896 ifeq "$(Windows_Host)" "NO"
897 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc
898 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg
899 else
900 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
901 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
902 endif
903
904 # Set the INSTALL_DISTDIR_p for each package; compiler is special
905 $(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\
906 $(eval INSTALL_DISTDIR_$p = dist-install))
907 INSTALL_DISTDIR_compiler = stage2
908
909 # Now we can do the installation
910 install_packages: install_libexecs
911 install_packages: rts/dist/package.conf.install
912 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
913 $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
914 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
915 $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts"
916 $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts")
917 $(foreach p, $(INSTALL_PACKAGES), \
918 $(call make-command, \
919 "$(ghc-cabal_INPLACE)" copy \
920 $p $(INSTALL_DISTDIR_$p) \
921 "$(STRIP_CMD)" \
922 '$(DESTDIR)' \
923 '$(prefix)' \
924 '$(ghclibdir)' \
925 '$(docdir)/html/libraries' \
926 '$(GhcLibWays)'))
927 "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install
928 $(foreach p, $(INSTALL_PACKAGES), \
929 $(call make-command, \
930 "$(ghc-cabal_INPLACE)" register \
931 $p $(INSTALL_DISTDIR_$p) \
932 "$(INSTALLED_GHC_REAL)" \
933 "$(INSTALLED_GHC_PKG_REAL)" \
934 "$(DESTDIR)$(topdir)" \
935 '$(DESTDIR)' \
936 '$(prefix)' \
937 '$(ghclibdir)' \
938 '$(docdir)/html/libraries' \
939 $(RelocatableBuild)))
940 # when we install the packages above, ghc-pkg obeys umask when creating
941 # the package.conf files, but for everything else we specify the
942 # permissions. We therefore now fix the permissions of package.cache.
943 # This means "sudo make install" does the right thing even if it runs
944 # with an 077 umask.
945 for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
946
947 # -----------------------------------------------------------------------------
948 # Binary distributions
949
950 ifneq "$(CLEANING)" "YES"
951 # This rule seems to hold some files open on Windows which prevents
952 # cleaning, perhaps due to the $(wildcard).
953
954 $(eval $(call bindist-list,.,\
955 LICENSE \
956 README \
957 INSTALL \
958 configure config.sub config.guess install-sh \
959 settings.in \
960 packages \
961 Makefile \
962 mk/config.mk.in \
963 $(INPLACE_BIN)/mkdirhier \
964 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
965 utils/ghc-pwd/dist-install/build/tmp/ghc-pwd \
966 $(BINDIST_WRAPPERS) \
967 $(BINDIST_PERL_SOURCES) \
968 $(BINDIST_LIBS) \
969 $(BINDIST_HI) \
970 $(BINDIST_EXTRAS) \
971 $(includes_H_FILES) \
972 $(includes_DERIVEDCONSTANTS) \
973 $(includes_GHCCONSTANTS) \
974 $(libffi_HEADERS) \
975 $(INSTALL_LIBEXECS) \
976 $(INSTALL_LIBEXEC_SCRIPTS) \
977 $(INSTALL_TOPDIR_BINS) \
978 $(INSTALL_TOPDIR_SCRIPTS) \
979 $(INSTALL_BINS) \
980 $(INSTALL_SCRIPTS) \
981 $(INSTALL_MANPAGES) \
982 $(INSTALL_DOCS) \
983 $(INSTALL_LIBRARY_DOCS) \
984 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
985 docs/index.html \
986 compiler/stage2/doc \
987 $(wildcard libraries/*/dist-install/doc/) \
988 $(wildcard libraries/*/*/dist-install/doc/) \
989 $(filter-out settings,$(INSTALL_LIBS)) \
990 $(RTS_INSTALL_LIBS) \
991 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
992 mk/project.mk \
993 mk/install.mk.in \
994 bindist.mk \
995 libraries/gen_contents_index \
996 libraries/prologue.txt \
997 $(wildcard libraries/dph/LICENSE \
998 libraries/dph/ghc-packages \
999 libraries/dph/ghc-packages2 \
1000 libraries/dph/ghc-stage2-package) \
1001 ))
1002 endif
1003 # mk/project.mk gets an absolute path, so we manually include it in
1004 # the bindist with a relative path
1005
1006 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1007
1008 unix-binary-dist-prep:
1009 $(call removeTrees,bindistprep/)
1010 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1011 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1012 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1013 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1014 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1015 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1016 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1017 echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
1018 echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK)
1019 cd $(BIN_DIST_PREP_DIR) && autoreconf
1020 $(call removeFiles,$(BIN_DIST_PREP_TAR))
1021 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1022 # tree then we want to include the real file, not a symlink to it
1023 cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1024
1025 windows-binary-dist-prep:
1026 $(call removeTrees,bindistprep/)
1027 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1028 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1029
1030 # tryTimes tries to run its third argument multiple times, until it
1031 # succeeds. Don't call it directly; call try10Times instead.
1032 # The first and second argument to tryTimes are lists of values.
1033 # The length of the first argument is the number of times we have
1034 # already tried. The length of the second argument is the number more
1035 # times we will try.
1036 tryTimes = $(if $2, \
1037 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1038 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1039 )
1040
1041 # Try to run the argument 10 times. If all 10 fail, fail.
1042 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1043
1044 .PHONY: publish-binary-dist
1045 publish-binary-dist:
1046 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist)
1047
1048 ifeq "$(mingw32_TARGET_OS)" "1"
1049 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
1050 else
1051 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc
1052 endif
1053
1054 .PHONY: publish-docs
1055 publish-docs:
1056 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1057
1058 # -----------------------------------------------------------------------------
1059 # Source distributions
1060
1061 # Do it like this:
1062 #
1063 # $ ./boot
1064 # $ ./configure
1065 # $ make sdist
1066 #
1067
1068 # A source dist is built from a (partial) build tree, because we
1069 # require some extra files not contained in a git checkout: the
1070 # output from Happy and Alex, for example.
1071 #
1072 # The steps performed by 'make sdist' are as follows:
1073 # - build those extra files
1074 # - create a complete link-tree of the current build tree in /tmp
1075 # - run 'make distclean' on that tree
1076 # - remove a bunch of other files that we know shouldn't be in the dist
1077
1078 #
1079 # Directory in which we're going to build the src dist
1080 #
1081 SRC_DIST_ROOT = sdistprep
1082 SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)
1083
1084 SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
1085 SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
1086 SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
1087 SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT)
1088
1089 SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src
1090 SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs
1091 SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
1092 SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT)
1093
1094 SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
1095 SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
1096 SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
1097 SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT)
1098
1099 #
1100 # Files to include in source distributions
1101 #
1102 SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1103 utils docs rts compiler ghc driver libraries libffi-tarballs
1104 SRC_DIST_GHC_FILES += \
1105 configure.ac config.guess config.sub configure \
1106 aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \
1107 install-sh settings.in VERSION GIT_COMMIT_ID \
1108 boot packages ghc.mk MAKEHELP.md
1109
1110 .PHONY: VERSION
1111 VERSION:
1112 @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \
1113 then echo "$@ needs no update"; \
1114 else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi
1115
1116 .PHONY: GIT_COMMIT_ID
1117 GIT_COMMIT_ID:
1118 @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \
1119 echo "******************************************************************************"; \
1120 echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \
1121 echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \
1122 echo "Please re-run './configure' before creating source-distribution"; \
1123 echo "******************************************************************************"; \
1124 exit 1; \
1125 fi
1126 @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \
1127 then echo "$@ needs no update"; \
1128 else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi
1129
1130 sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID
1131
1132 # Extra packages which shouldn't be in the source distribution: see #8801
1133 EXTRA_PACKAGES=parallel stm random primitive vector dph
1134
1135 .PHONY: sdist-ghc-prep-tree
1136 sdist-ghc-prep-tree :
1137 $(call removeTrees,$(SRC_DIST_GHC_ROOT))
1138 $(call removeFiles,$(SRC_DIST_GHC_TARBALL))
1139 mkdir -p $(SRC_DIST_ROOT)
1140 mkdir -p $(SRC_DIST_GHC_ROOT)
1141 mkdir -p $(SRC_DIST_GHC_DIR)
1142 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1143 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
1144 cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
1145 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
1146 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
1147 $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
1148 $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
1149 for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done
1150 cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1151
1152 # Add files generated by alex and happy.
1153 # These rules depend on sdist-ghc-prep-tree.
1154 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x))
1155 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y))
1156 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x))
1157 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y))
1158 $(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y))
1159 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x))
1160 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y))
1161
1162 .PHONY: sdist-ghc-prep
1163 sdist-ghc-prep : sdist-ghc-prep-tree
1164
1165 .PHONY: sdist-windows-tarballs-prep
1166 sdist-windows-tarballs-prep :
1167 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT))
1168 $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL))
1169 mkdir -p $(SRC_DIST_ROOT)
1170 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
1171 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)
1172 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
1173 cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs
1174 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git)
1175
1176 .PHONY: sdist-testsuite-prep
1177 sdist-testsuite-prep :
1178 $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
1179 $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
1180 mkdir -p $(SRC_DIST_ROOT)
1181 mkdir -p $(SRC_DIST_TESTSUITE_ROOT)
1182 mkdir -p $(SRC_DIST_TESTSUITE_DIR)
1183 mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite
1184 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
1185 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean
1186
1187 .PHONY: sdist-ghc
1188 sdist-ghc: sdist-ghc-prep
1189 cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL)
1190
1191 .PHONY: sdist-windows-tarballs
1192 sdist-windows-tarballs: sdist-windows-tarballs-prep
1193 cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
1194
1195 .PHONY: sdist-testsuite
1196 sdist-testsuite: sdist-testsuite-prep
1197 cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
1198
1199
1200 .PHONY: sdist
1201 sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite
1202
1203 sdist-manifest : $(SRC_DIST_GHC_TARBALL)
1204 tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1205
1206 # Upload the distribution(s)
1207 # Retrying is to work around buggy firewalls that corrupt large file transfers
1208 # over SSH.
1209 ifneq "$(PublishLocation)" ""
1210 publish-sdist :
1211 $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist)
1212 $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist)
1213 endif
1214
1215 # -----------------------------------------------------------------------------
1216 # sdisting libraries
1217
1218 # Use manually, with e.g.:
1219 # make sdist_directory
1220
1221 sdist_%:
1222 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1223
1224 # -----------------------------------------------------------------------------
1225 # Cleaning
1226
1227 .PHONY: clean
1228
1229 CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h
1230 CLEAN_FILES += libraries/base/include/EventConfig.h
1231 CLEAN_FILES += mk/config.mk.old
1232 CLEAN_FILES += mk/project.mk.old
1233 CLEAN_FILES += compiler/ghc.cabal.old
1234
1235 # These are no longer generated, but we still clean them for a while
1236 # as they may still be in old GHC trees:
1237 CLEAN_FILES += includes/GHCConstants.h
1238 CLEAN_FILES += includes/DerivedConstants.h
1239 CLEAN_FILES += includes/ghcautoconf.h
1240 CLEAN_FILES += includes/ghcplatform.h
1241 CLEAN_FILES += includes/ghcversion.h
1242 CLEAN_FILES += utils/ghc-pkg/Version.hs
1243 CLEAN_FILES += compiler/prelude/primops.txt
1244 CLEAN_FILES += $(wildcard compiler/primop*incl)
1245
1246 clean : clean_files clean_libraries
1247
1248 .PHONY: clean_files
1249 clean_files :
1250 $(call removeFiles,$(CLEAN_FILES))
1251 # this is here since CLEAN_FILES can't handle folders
1252 $(call removeTrees,includes/dist-derivedconstants)
1253 $(call removeTrees,inplace/bin)
1254 $(call removeTrees,inplace/lib)
1255 $(call removeTrees,libraries/bootstrapping.conf)
1256
1257 .PHONY: clean_libraries
1258 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
1259 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0))
1260
1261 clean_libraries:
1262 $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1263 $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))))
1264 $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1265 $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1266 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1267
1268 # We have to define a clean target for each library manually, because the
1269 # libraries/*/ghc.mk files are not included when we're cleaning.
1270 ifeq "$(CLEANING)" "YES"
1271 $(foreach lib,$(PACKAGES_STAGE0),\
1272 $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot)))
1273 $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\
1274 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1275 endif
1276
1277 clean : clean_haddock_index
1278 .PHONY: clean_haddock_index
1279 clean_haddock_index:
1280 $(call removeTrees,libraries/dist-haddock)
1281
1282 clean : clean_bindistprep
1283 .PHONY: clean_bindistprep
1284 clean_bindistprep:
1285 $(call removeTrees,bindistprep/)
1286
1287 distclean : clean
1288 # Clean the files that ./validate creates.
1289 $(call removeFiles,mk/are-validating.mk)
1290
1291 # Clean the files that we ask ./configure to create.
1292 $(call removeFiles,mk/config.mk)
1293 $(call removeFiles,mk/install.mk)
1294 $(call removeFiles,mk/project.mk)
1295 $(call removeFiles,compiler/ghc.cabal)
1296 $(call removeFiles,ghc/ghc-bin.cabal)
1297 $(call removeFiles,utils/runghc/runghc.cabal)
1298 $(call removeFiles,settings)
1299 $(call removeFiles,docs/users_guide/ug-book.xml)
1300 $(call removeFiles,docs/users_guide/ug-ent.xml)
1301 $(call removeFiles,docs/index.html)
1302 $(call removeFiles,libraries/prologue.txt)
1303 $(call removeFiles,distrib/configure.ac)
1304 $(call removeFiles,ch01.html ch02.html index.html)
1305
1306 # ./configure also makes these.
1307 $(call removeFiles,mk/config.h)
1308
1309 # Internal files generated by ./configure for itself.
1310 $(call removeFiles,config.cache config.status config.log)
1311
1312 # ./configure build ghc-pwd in utils/ghc-pwd/dist-boot, so clean it up.
1313 $(call removeTrees,utils/ghc-pwd/dist-boot)
1314
1315 # The root Makefile makes .old versions of some files that configure
1316 # generates, so we clean those too.
1317 $(call removeFiles,mk/config.mk.old)
1318 $(call removeFiles,mk/project.mk.old)
1319 $(call removeFiles,compiler/ghc.cabal.old)
1320
1321 # Clean the *Config.h files generated by library configure scripts
1322 $(call removeFiles,libraries/base/include/HsBaseConfig.h)
1323 $(call removeFiles,libraries/base/include/EventConfig.h)
1324 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
1325 $(call removeFiles,libraries/process/include/HsProcessConfig.h)
1326 $(call removeFiles,libraries/unix/include/HsUnixConfig.h)
1327 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h)
1328
1329 # The library configure scripts also like creating autom4te.cache
1330 # directories, so clean them all up.
1331 $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1332
1333 # We make these when making or testing bindists
1334 $(call removeFiles,bindist-list)
1335 $(call removeTrees,bindisttest/a)
1336
1337 # Not sure why this is being cleaned here.
1338 $(call removeTrees,includes/dist-derivedconstants)
1339
1340 # Finally, clean the inplace tree.
1341 $(call removeTrees,inplace)
1342
1343 maintainer-clean : distclean
1344 $(call removeFiles,configure mk/config.h.in)
1345 $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache))
1346 $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \
1347 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1348 $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1349 $(call removeFiles,$(patsubst %, libraries/%/configure, \
1350 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1351 $(call removeFiles,libraries/base/include/HsBaseConfig.h.in)
1352 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
1353 $(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
1354 $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
1355 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in)
1356
1357 .PHONY: all_libraries
1358
1359 .PHONY: bootstrapping-files
1360 # See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting
1361 bootstrapping-files: $(includes_H_CONFIG)
1362 bootstrapping-files: $(includes_DERIVEDCONSTANTS)
1363 bootstrapping-files: $(includes_GHCCONSTANTS)
1364 bootstrapping-files: $(libffi_HEADERS)
1365
1366 .DELETE_ON_ERROR:
1367
1368 # -----------------------------------------------------------------------------
1369
1370 ifeq "$(HADDOCK_DOCS)" "YES"
1371 BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock"
1372 endif
1373 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
1374 BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla
1375 else
1376 BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared
1377 endif
1378 BINDIST_LIBRARY_FLAGS += --disable-library-prof
1379
1380 .PHONY: validate_build_xhtml
1381 validate_build_xhtml:
1382 cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup
1383 cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)"
1384 cd libraries/xhtml && ./Setup build --builddir=dist-bindist
1385 ifeq "$(HADDOCK_DOCS)" "YES"
1386 cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
1387 endif
1388 cd libraries/xhtml && ./Setup install --builddir=dist-bindist
1389 cd libraries/xhtml && ./Setup clean --builddir=dist-bindist
1390 cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
1391
1392 # -----------------------------------------------------------------------------
1393 # Numbered phase targets
1394
1395 # In phase 1, we'll be building dependency files for most things
1396 # built by the bootstrapping compiler while make is 'include'ing
1397 # makefiles. But in order to build dependency files, we'll need to
1398 # build any automatically generated .hs files, which means that
1399 # we'll need to be able to build any tools that generate .hs files
1400 # etc. But in order to do that, we need to already know the
1401 # dependencies for those tools, so we build their dependency files
1402 # here.
1403 .PHONY: phase_0_builds
1404 # hsc2hs is needed, e.g. to make the .hs files for hpc.
1405 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1406 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1407 # genprimopcode is needed to make the .hs-incl files that are in the
1408 # ghc package.
1409 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1410 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1411 # deriveConstants is used to create header files included in the
1412 # ghc package.
1413 phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell)
1414 phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm)
1415
1416 .PHONY: phase_1_builds
1417 phase_1_builds: $(PACKAGE_DATA_MKS)
1418