7bd91062fe60d27d88520cf8ad4c71f7ab5e14fb
[ghc.git] / mk / config.mk.in
1 #
2 # @configure_input@
3 #
4 #################################################################################
5 #
6 # config.mk.in-template
7 #
8 # This file defines all the variables that set the configuration of
9 # a particular build.
10 #
11 #
12 #################################################################################
13
14 # The configuration is defined in two steps:
15 #
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
18 # to config.mk.in
19 #
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
21 # options s/he wants.
22 #
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
26 #
27 # This is one of only two files that configure generates (the other is config.h)
28 #
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
31 #
32
33 # There is a section below for each project within the fptools suite
34 #
35 # PLUS
36 #
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
39
40
41 #################################################################################
42 #
43 # Project-wide platform variables
44 #
45 #################################################################################
46
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
49
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
53
54 # Hack alert:
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
57 #
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
63
64 #
65 # ToDo: check if these can be purged now. -- sof
66 #
67
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
71
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
75
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
79
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
83
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
86 #
87 LeadingUnderscore=@LeadingUnderscore@
88
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
90 exeext=@exeext@
91
92 #################################################################################
93 #
94 # project-wide flags
95 #
96 # Set of options applicable to all fptools projects
97 #
98 #################################################################################
99
100 #
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
104 #
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
107 #
108 # Generally: * glafp-utils should be first
109 # * happy next
110 # * ghc next
111 # then it's up to you
112
113 ProjectsToBuild = glafp-utils ghc
114 #
115 # Make a distinction between building and installing
116 #
117 ProjectsToInstall = glafp-utils ghc
118
119 #
120 # Should the various project tests directories be built?
121 #
122 IncludeTestDirsInBuild=NO
123
124 #
125 # Name variables for the main project
126 #
127 Project = Ghc
128 ProjectName = $($(Project)ProjectName)
129 ProjectNameShort = $($(Project)ProjectNameShort)
130 ProjectVersion = $($(Project)ProjectVersion)
131 ProjectVersionInt = $($(Project)ProjectVersionInt)
132 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
133
134 #################################################################################
135 #
136 # GHC project
137 #
138 # Set of (configurable) options needed by the ghc tree
139 # plus their default options (if any).
140 #
141 #################################################################################
142
143 #
144 # Name variables for ghc:
145 #
146 # *ProjectVersion is treated as a *string*
147 # *ProjectVersionInt is treated as an *integer* (for cpp defines)
148
149 GhcProjectName = The Glorious Glasgow Haskell Compilation System
150 GhcProjectNameShort = ghc
151 GhcProjectVersion = 3.02
152 GhcProjectVersionInt = 302
153 GhcProjectPatchLevel = 0
154
155 #---------------------------------------------------------------
156 #
157 # Variables that control how the compiler itself is built
158
159 # Specify the Haskell compiler to be used to compile the compiler itself
160 #
161 # WithGhcHc Path name of the compiler to use
162 #
163 # WithGhcHcType What "type" of compiler is being used
164 # Valid options:
165 # HC_CHALMERS_HBC
166 # HC_GLASGOW_GHC
167 # HC_ROJEMO_NHC
168 # HC_UNSPECIFIED
169
170 WithGhcHc = ghc-2.10
171
172 # Unused, we think
173 # WithGhcHcType=HC_GLASGOW_GHC
174
175 # Extra ways in which to build the compiler (for example, you might want to
176 # build a profiled compiler so you can see where it spends its time)
177 GhcCompilerWays=
178
179 # Extra option flags to pass to the compiler that compiles the compiler
180 # (Ones that are essential are wired into ghc/compiler/Makefile)
181 # Typical ones:
182 # -H25m allocate a bigger heap (default is 6m)
183 #
184 # -O compile an optimised compiler
185 # NB! If you add -O you'll almost certainly need to increase
186 # the amount of heap space too (to 15m or more)
187 #
188 # -DDEBUG include consistency/assertion checks in the compiled compiler
189 #
190 # -dcore-lint check the types after every pass of the compiler;
191 # a pretty strong internal check
192 GhcHcOpts=
193
194 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
195 GhcWithHscBuiltViaC=NO
196
197 # Build hsc with -O and turn optimising flag on when compiling
198 # the intermediate C file
199 GhcUseGccForOptAsm=YES
200
201 # Compile intermediate C file with debugging options set.
202 GhcUseGccForDebuggingAsm=YES
203
204 # Build a registerised version of hsc and runtime
205 # (you'd be desperate or silly not to).
206 GhcWithRegisterised=YES
207
208 # Build a compiler with a native code generator backend
209 # (as well as a C backend)
210 #
211 # Target platforms supported:
212 # i386, alpha & sparc
213 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
214
215 #
216 # Building various ways?
217 # (right now, empty if not).
218 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
219 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
220 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
221 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
222 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
223
224 #---------------------------------------------------------------
225 #
226 # Variables that control how the prelude libraries and runtime system are built
227
228 # What extra ways to build the libraries in
229 # In addition to the normal sequential way, the default is to also build
230 # profiled prelude libraries.
231 GhcLibWays=p
232
233 # Option flags to pass to GHC when it's compiling prelude modules
234 # Typically these are things like -O or -dcore-lint
235 # The ones that are *essential* are wired into ghc/lib/Makefile
236 #
237 # -O is pretty desirable, otherwise no inlining of prelude
238 # things (incl "+") happens when compiling with this compiler
239
240 #
241 # Splitting profiled code produces awfully large archives under ELF, so
242 # we turn it off here.
243 #
244 # ToDo: track down the source of this.
245 #
246 ifeq "$(strip $(way))" "p"
247 GhcLibHcOpts= -O
248 else
249 ifeq "$(strip $(way))" "mr"
250 GhcLibHcOpts= -O
251 else
252 ifeq "$(GhcWithHscBuiltViaC)" "NO"
253 GhcLibHcOpts= -O -split-objs -odir $*
254 else
255 #NB: .hc files need to distributed in *unsplit* form.
256 GhcLibHcOpts= -O
257 endif
258 endif
259 endif
260
261 # Build the Haskell Readline bindings?
262 #
263 GhcLibsWithReadline=NO
264 #
265 # Include path to readline.h
266 # (no path == in standard include path)
267 #
268 ReadlineIncludePath=
269
270 # Build the socket libraries? (ToDo: is this used?)
271 #
272 GhcLibsWithSockets=YES
273
274 # what to include in a binary distribution
275
276 GhcMainDir = ghc
277 GhcBinDistDirs = ghc
278 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
279 GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
280 GhcBinDistLibPrlScripts = hscpp
281 GhcBinDistBins = hp2ps
282
283 #################################################################################
284 #
285 # happy project
286 #
287 # Happy specific options
288 #
289 #################################################################################
290
291 #
292 # Name variables for happy:
293 #
294 HappyProjectName = Happy
295 HappyProjectNameShort = happy
296 HappyProjectVersion = 1.5
297 HappyProjectVersionInt = 15
298 HappyProjectPatchLevel = 0
299
300 # The compiler you'd like to use to compile Happy
301 WithHappyHc = $(WithGhcHc)
302
303 # HappyHcOpts gives the flags to pass to the Haskell compiler used
304 # to compile the Happy sources with.
305 #
306 HappyHcOpts =
307
308 # what to include in a binary distribution
309
310 HappyMainDir = happy
311 HappyBinDistDirs = happy
312 HappyBinDistDocs = happy/doc
313 HappyBinDistShScripts = happy
314
315 #################################################################################
316 #
317 # haggis project
318 #
319 # Haggis specific options
320 #
321 #################################################################################
322
323 #################################################################################
324 #
325 # green-card project
326 #
327 # Green-card specific options
328 #
329 #################################################################################
330
331 #################################################################################
332 #
333 # nofib project
334 #
335 # nofib specific options
336 #
337 #################################################################################
338
339
340 # NoFibSubDirs controls which set of tests should be run
341 # You can run one or more of
342 # imaginary
343 # spectral
344 # real
345 # parallel
346 # PRIVATE
347 # PENDING
348 # UNUSED
349 NoFibSubDirs = imaginary spectral real
350
351 # The different ways to build nofib. Default is just to mirror
352 # what is done for the ghc prelude libraries.
353 #
354 NoFibWays=$(GhcLibWays)
355
356 # Haskell compiler options for nofib
357 NoFibHcOpts=
358
359 # ==============================================================================
360 #
361 # END OF PROJECT-SPECIFIC STUFF
362 #
363 # Now come the generic configuration options
364 #
365 # ==============================================================================
366
367 #################################################################################
368 #
369 # Paths (see paths.mk)
370 #
371 #################################################################################
372
373 TMPDIR = /tmp
374
375 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
376
377 FPTOOLS_TOP_ABS = @hardtop@
378
379 #
380 # Installation directories, we don't use half of these,
381 # but since the configure script has them on offer while
382 # passing through, we might as well set them.
383
384 prefix = @prefix@
385 exec_prefix = @exec_prefix@
386 bindir = @bindir@
387 #UNUSED, see below: libexecdir = @libexecdir@
388 datadir = @datadir@
389 #sysconfdir = @datadir@
390 #sharedstatedir = @sharedstatedir@
391 #localstatedir = @localstatedir@
392 libdir = @libdir@
393 infodir = @infodir@
394 includedir = @includedir@
395 oldincludedir = @oldincludedir@
396 mandir = @mandir@
397 #UNUSED:srcdir = @srcdir@
398
399 #
400 # Default values for most of the above are only set if
401 # they weren't configured to anything in particular
402 # via the configure script. (i.e., we make no assumption
403 # that the autoconf-generated script will assign defaults
404 # to all of the above).
405 #
406 ifeq "$(strip $(exec_prefix))" ""
407 exec_prefix = $(prefix)
408 endif
409 ifeq "$(strip $(bindir))" ""
410 bindir = $(exec_prefix)/bin
411 endif
412
413 #
414 # NOTE: by intention, libexecdir and libdir point to
415 # the same place.
416 # => Only way to override this is to set libexecdir= on the command line.
417 # (NOTE: configure script setting is ignored).
418 libexecdir = $(libdir)
419
420 ifeq "$(strip $(datadir))" ""
421 datadir = $(prefix)/share
422 endif
423 ifeq "$(strip $(libdir))" ""
424 libdir = $(exec_prefix)/lib
425 endif
426 ifeq "$(strip $(infodir))" ""
427 infodir = $(prefix)/info
428 endif
429 ifeq "$(strip $(includedir))" ""
430 includedir = $(prefix)/include
431 endif
432 ifeq "$(strip $(oldincludedir))" ""
433 oldincludedir = /usr/include
434 endif
435 ifeq "$(strip $(mandir))" ""
436 mandir = $(prefix)/man
437 endif
438
439
440 #################################################################################
441 #
442 # Utilities programs: flags
443 #
444 #################################################################################
445
446 # If you want to give any standard flags to pretty much any utility
447 # (see utils.mk for a complete list), by adding a line here
448 #
449 # SRC_P_OPTS += ...
450 #
451 # where P is the utility. For example, to add -O to all Haskell
452 # compilations,
453 #
454 # SRC_HC_OPTS += -O
455
456
457 #################################################################################
458 #
459 # Utilities programs: where to find them
460 #
461 #################################################################################
462
463 #-----------------------------------------------------------------------------
464 # FPtools Utility locations
465
466 # By default, the various utils needed to be build ghc and chums
467 # is set up to point to the utils/ directory. Define here the
468 # path prefix for the utilities. Notice that it's a prefix with
469 # a trailing slash, so that it can be concatenated directly on
470 # front of a program name; if it's not set then we just look
471 # along the shell's $(PATH)
472 #
473 # If instead you want to use installed or your own versions of these,
474 # override the various *_PREFIX in build.mk, i.e., having the following
475 # in build.mk:
476 #
477 # MKDEPENDC_PREFIX=
478 #
479 # will force `make' to rummage around in your PATH to find `mkdependC' (not
480 # sure it would need it in the first place, but still).
481 #
482 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
483
484 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
485 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
486 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
487 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
488 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
489 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
490 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
491 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
492 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
493 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
494
495 # Still used?
496 LITERATE = $(FPTOOLS_TOP)/literate
497
498 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
499 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
500 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
501
502 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
503 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
504
505 RTS_PREFIX = $(FPTOOLS_TOP)/common-rts/
506
507 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
508 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
509 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
510 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
511 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
512 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
513
514
515 #-----------------------------------------------------------------------------
516 # Haskell compiler and mkdependHS
517
518 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
519 MKDEPENDHS = $(HC)
520
521 #-----------------------------------------------------------------------------
522 # C compiler
523 #
524 #
525 HaveGcc = @HaveGcc@
526 UseGcc = YES
527 WhatGccIsCalled = gcc
528 ifeq "$(strip $(HaveGcc))" "YES"
529 ifneq "$(strip $(UseGcc))" "YES"
530 CC = cc
531 else
532 CC = $(WhatGccIsCalled)
533 endif
534 endif
535
536 #-----------------------------------------------------------------------------
537 # GMP Library
538 #
539 HaveLibGmp = @HaveLibGmp@
540
541 #-----------------------------------------------------------------------------
542 # Flex
543
544 FLEX = @LEX@
545 FLEX_LIB = @LEXLIB@
546
547 #-----------------------------------------------------------------------------
548 # Other standard (ha!) Unix utilities
549
550 AR = @ArCmd@
551 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
552 BASH = /usr/local/bin/bash
553 #
554 # Could be either gzip or compress
555 #
556 COMPRESS = @CompressCmd@
557 COMPRESS_SUFFIX = @CompressSuffix@
558
559 CONTEXT_DIFF = @ContextDiffCmd@
560 CP = cp
561 CPP = @CPP@
562 CTAGS = $(ETAGS)
563 RAWCPP = @RAWCPP@
564 INSTALL = @INSTALL@
565 #
566 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
567 # install-sh script (if chosen). This not terribly useful to us, so we convert
568 # it into an abs. path.
569 #
570 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
571 LATEX = latex
572 LN_S = @LN_S@
573 MANMACROS = -man
574 MSMACROS = -ms
575 MV = mv
576 NROFF = nroff
577 PERL = @PerlCmd@
578 PIC = pic
579 PREPROCESSCMD = $(CC) -E
580 PRINTER = lpr
581 RANLIB = @RANLIB@
582 RM = rm -f
583 SED = @SedCmd@
584 SHELL = /bin/sh
585 #
586 # In emergency situations, REAL_SHELL is used to perform shell commands
587 # from within the ghc driver script, by scribbling the command line to
588 # a temp file and then having $(REAL_SHELL) execute it.
589 #
590 # The reason for having to do this is that overly long command lines
591 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
592 # 2.5.1), which is why this backdoor is provided. The situation of overly
593 # long command lines is either encountered while doing `make boot' in ghc/compiler,
594 # or when linking the compiler binary (`hsc').
595 #
596 # We do not use SHELL to execute long commands, as `make' will more than likely
597 # override whatever setting you have in your environment while executing.
598
599 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
600 # as it SHELL that will show up the bogosity in the first place, but setting
601 # it to anything else isn't really portable.
602 #
603 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
604 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
605 # command shell.
606 #
607 REAL_SHELL=$(SHELL)
608 SIZE = size
609 STRIP = strip
610 TAR = @TarCmd@
611
612 #
613 # Under cygwin32, we have to deal with .exe suffixes
614 #
615 EXE_SUFFIX=@ExeSuffix@
616
617 #
618 # This is special to literate/, ToDo: add literate-specific
619 # configure setup to literate/.
620 #
621 TBL = tbl
622 TEX = tex
623 TGRIND = tgrind
624 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
625 TIB = tib
626
627 TIME = @TimeCmd@
628 TROFF = troff
629 UNAME = uname
630 YACC = @YaccCmd@
631
632 #-----------------------------------------------------------------------------
633 # SGML stuff (currently not configured - we assume you have it)
634
635 SGML2LATEX = sgml2latex
636 SGML2HTML = sgml2html
637 SGML2INFO = sgml2info
638 SGML2TXT = sgml2txt
639
640 #-----------------------------------------------------------------------------
641 # FPtools support software
642
643 # Stuff from fptools/glafp-utils
644 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
645 LTX = $(LTX_PREFIX)ltx
646 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
647 LNDIR = $(LNDIR_PREFIX)lndir
648 MSUB = $(MSUB_PREFIX)msub
649 ETAGS = $(ETAGS_PREFIX)etags
650 VERBATIM = $(VERBATIM_PREFIX)verbatim
651 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
652 SGML2LATEX = sgml2latex
653 RUNTEST = $(RUNTEST_PREFIX)runstdtest
654 HAPPY = @HappyCmd@
655 HAPPY_VERSION = @HappyVersion@
656 LX = @LxCmd@
657 GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
658
659 #
660 # Stuff from fptools/literate
661 #
662 INFO = $(UTIL_PREFIX)info
663 MAKEINFO = $(INFO_PREFIX)makeinfo
664 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
665 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
666 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
667 LIT2HTML = $(LITERATE_PREFIX)lit2html
668 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
669 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
670 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
671 LIT2TEXT = $(LITERATE_PREFIX)lit2text
672 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
673
674 #
675 # Stuff from fptools/ghc/utils
676 #
677 UNLIT = $(UNLIT_PREFIX)unlit
678 UGEN = $(UGEN_PREFIX)ugen
679 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
680 HP2PS = $(HP2PS_PREFIX)hp2ps
681 HSCPP = $(HSCPP_PREFIX)hscpp
682 HSTAGS = $(HSTAGS_PREFIX)hstags
683
684 #
685 # Options for the compiling different `ways'. Various projects within
686 # the glorious fptools tree support building in various user-configured
687 # ways. For instance, you could set up one `way' such that the prelude
688 # libraries all were built with the option -ffoldr-build-on.
689 #
690 # To configure up your own way, have a look at some of the standard ways
691 # such as profiling, and create your own set of WAY_*_OPTS defs below.
692 # After having done that, add your way string to WAYS, and after having
693 # run the configure script, the different projects will add the new way
694 # to the list of ways they support.
695 #
696
697 #
698 # IMPORTANT! The WAYS variable configures the different `ways'
699 # you want to build a project (or maybe just parts of it, as is
700 # the case for ghc/). This variable is intended set inside the
701 # project mk setup, enforcing a global fptools WAYS is a bit too
702 # much (do you *really* want to build glafp-utils the profiled-concurrent
703 # way?)
704 #
705
706 #
707 # Definitions of the different ways:
708 #
709 # * their name:
710 # - tag, e.g., p
711 # - description, e.g., profiling
712 # * what they mean to the driver:
713 # - WAY_p_HC_OPTS gives the list of command-line options
714 # to the driver.
715 #
716
717 #
718 # The ways currently defined.
719 #
720 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
721
722 #
723 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
724 # as the driver script treats these guys specially and needs to carefully be told
725 # about the options for these. Hence, we hide the required command line options
726 # for these in the ghc/driver, as this is the only place they are needed.
727 #
728 # If you want to add to these default options, fill in the variables below:
729 #
730 WAY_p_NAME=profiling
731 WAY_p_HC_OPTS= -prof
732
733 # Way t:
734 WAY_t_NAME=ticky-ticky profiling
735 WAY_t_HC_OPTS= -ticky
736
737 # Way `u':
738 WAY_u_NAME=unregisterized (using portable C only)
739 WAY_u_HC_OPTS=
740
741 # Way `mc': concurrent
742 WAY_mc_NAME=concurrent
743 WAY_mc_HC_OPTS=-concurrent
744
745 # Way `mr':
746 WAY_mr_NAME=profiled concurrent
747 WAY_mr_HC_OPTS=-prof -concurrent
748
749 # Way `mt':
750 WAY_mt_NAME=ticky-ticky concurrent
751 WAY_mt_HC_OPTS=-ticky -concurrent
752
753 # Way `mp':
754 WAY_mp_NAME=parallel
755 WAY_mp_HC_OPTS=-parallel
756
757 #
758 # Way `mg':
759 #
760 WAY_mg_NAME=GranSim
761 WAY_mg_HC_OPTS=-gransim
762
763 #
764 # Ways for different garbage collectors
765 #
766 WAY_2s_NAME=2-space GC
767 WAY_2s_HC_OPTS=-2s
768
769 WAY_1s_NAME=1-space GC
770 WAY_1s_HC_OPTS=-1s
771
772 WAY_du_NAME=dual-mode GC
773 WAY_du_HC_OPTS=-du
774
775 #
776 # Add user-way configurations here:
777 #
778 WAY_A_NAME=
779 WAY_A_HC_OPTS=
780
781 WAY_B_NAME=
782 WAY_B_HC_OPTS=
783
784 WAY_a_NAME=
785 WAY_a_HC_OPTS=
786
787 WAY_b_NAME=
788 WAY_b_HC_OPTS=
789
790 WAY_c_NAME=
791 WAY_c_HC_OPTS=
792
793 WAY_d_NAME=
794 WAY_d_HC_OPTS=
795
796 WAY_e_NAME=
797 WAY_e_HC_OPTS=
798
799 WAY_f_NAME=
800 WAY_f_HC_OPTS=
801
802 WAY_g_NAME=
803 WAY_g_HC_OPTS=
804
805 WAY_h_NAME=
806 WAY_h_HC_OPTS=
807
808 WAY_i_NAME=
809 WAY_i_HC_OPTS=
810
811 WAY_j_NAME=
812 WAY_j_HC_OPTS=
813
814 WAY_k_NAME=
815 WAY_k_HC_OPTS=
816
817 WAY_l_NAME=
818 WAY_l_HC_OPTS=
819
820 WAY_m_NAME=
821 WAY_m_HC_OPTS=
822
823 WAY_n_NAME=
824 WAY_n_HC_OPTS=
825
826 WAY_o_NAME=
827 WAY_o_HC_OPTS=