Update autoconf test for gcc to require 4.7 and up
[ghc.git] / mk / config.mk.in
1 # -*-makefile-*-
2 # @configure_input@
3 #
4 ################################################################################
5 #
6 # config.mk.in
7 #
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
10 # configure script.
11 #
12 # DO NOT EDIT THIS FILE!
13 #
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # If you edit config.mk your changes will be spammed.
16 #
17 # - Settings in this file may be overriden by giving replacement
18 # definitions in build.mk. See build.mk.sample for a good
19 # starting point for a build.mk file.
20 #
21 # If you don't have a build.mk file then you get defaults for everything.
22 # The defaults should provide a reasonable vanilla build.
23
24 # TOP: the top of the fptools hierarchy, absolute path.
25 # On Windows this is a c:/foo/bar style path.
26 TOP = @hardtop@
27
28 include $(TOP)/mk/project.mk
29
30 # By default, be verbose
31 V = 1
32
33 ################################################################################
34 #
35 # Global configuration options
36 #
37 ################################################################################
38
39 NO_INCLUDE_DEPS = NO
40 NO_INCLUDE_PKGDATA = NO
41
42 ################################################################################
43 #
44 # Variables that control how the compiler itself is built
45 #
46 ################################################################################
47
48 # The compiler used to build GHC is $(GHC). To change the actual compiler
49 # used, re-configure with --with-ghc=<path-to-ghc>.
50
51 # Extra option flags to pass to the compiler that compiles the compiler
52 # (Ones that are essential are wired into compiler/Makefile)
53 # Typical options to use here:
54 #
55 # -DDEBUG include debugging code and assertions (will make the
56 # compiler slower and produce debugging output, but useful
57 # for development)
58 #
59 # -dcore-lint check the types after every pass of the compiler;
60 # a pretty strong internal check of the compiler being
61 # used to compile GHC. Useful when bootstrapping.
62 GhcHcOpts=-Rghc-timing
63
64 # Extra options added to specific stages of the compiler bootstrap.
65 # These are placed later on the command line, and may therefore
66 # override options from $(GhcHcOpts).
67 #
68 # See Note [Stage number in build variables].
69 GhcStage1HcOpts=
70 GhcStage2HcOpts=-O2
71 GhcStage3HcOpts=-O2
72
73
74 # Note [Stage number in build variables].
75 #
76 # There are (unfortunately) two different naming schemes for build variables
77 # specific to a certain stage.
78 #
79 # * GhcStage1HcOpts/GhcStage2HcOpts/GhcStage3HcOpts:
80 #
81 # The stage number refers to the compiler stage being built (ghc library
82 # and executable).
83 #
84 # * SRC_HC_OPTS_STAGE$4 and SRC_HC_WARNING_OPTS_STAGE$4:
85 #
86 # The stage number refers to the compiler stage the options are passed to.
87
88 GhcDebugged=NO
89
90 # GhcProfiled=YES means compile a profiled stage-2 compiler
91 GhcProfiled=NO
92
93 # WITH_TERMINFO can be used to disable terminfo support throughout the compiler
94 # and its tools. This is handy in the case of cross-compilation, where we may
95 # not have an ncurses build for the target.
96 ifeq "$(TargetOS_CPP)" "ios"
97 # iOS has no terminfo support
98 WITH_TERMINFO=NO
99 else ifeq "$(Windows_Target)" "YES"
100 WITH_TERMINFO=NO
101 else
102 WITH_TERMINFO=YES
103 endif
104
105 ifeq "$(findstring $(TargetOS_CPP),linux freebsd dragonfly openbsd netbsd solaris2 kfreebsdgnu haiku linux-android)" ""
106 TargetElf = NO
107 else
108 TargetElf = YES
109 endif
110
111 # Some platforms don't support shared libraries
112 NoSharedLibsPlatformList = \
113 powerpc-ibm-aix \
114 x86_64-unknown-mingw32 \
115 i386-unknown-mingw32
116
117 ifeq "$(SOLARIS_BROKEN_SHLD)" "YES"
118 NoSharedLibsPlatformList += i386-unknown-solaris2
119 endif
120
121 PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),\
122 $(NoSharedLibsPlatformList)),NO,YES)
123
124 # DYNAMIC_BY_DEFAULT says whether this compiler will default to
125 # building dynamic executables, i.e. -dynamic is on. We do this for
126 # most platforms because it lets us use the system dynamic linker
127 # instead of our own linker for GHCi.
128 #
129 # Currently this isn't possible on Windows, and we have not yet enabled
130 # it on i386 while we consider the performance implications.
131 #
132 ifeq "$(TargetOS_CPP)" "mingw32"
133 DYNAMIC_BY_DEFAULT = NO
134 else ifeq "$(TargetArch_CPP)" "i386"
135 DYNAMIC_BY_DEFAULT = NO
136 else
137 DYNAMIC_BY_DEFAULT = YES
138 endif
139
140 # For now, we unconditionally disable dynamic-by-default, as the
141 # cabal-install's that are in the wild don't handle it properly.
142 DYNAMIC_BY_DEFAULT = NO
143
144 # If building both v and dyn ways, then use -dynamic-too to build them.
145 # This makes the build faster.
146 DYNAMIC_TOO = YES
147
148 # Use the dynamic way when building programs in the GHC tree. In
149 # particular, this means that GHCi will use DLLs rather than loading
150 # object files directly.
151 ifeq "$(TargetOS_CPP)" "mingw32"
152 # This doesn't work on Windows yet
153 DYNAMIC_GHC_PROGRAMS = NO
154 DYNAMIC_TOO=NO
155 else ifeq "$(PlatformSupportsSharedLibs)" "NO"
156 DYNAMIC_GHC_PROGRAMS = NO
157 else
158 DYNAMIC_GHC_PROGRAMS = YES
159 endif
160
161 # Build a compiler that will build *unregisterised* libraries and
162 # binaries by default. Unregisterised code is supposed to compile and
163 # run without any support for architecture-specific assembly mangling,
164 # register assignment or tail-calls, and is therefore a good way to get
165 # started when porting GHC to new architectures.
166 #
167 # NOTE: the stage1 compiler will be a registerised binary (assuming
168 # the compiler you build with is generating registerised binaries), but
169 # the stage2 compiler will be an unregisterised binary.
170 #
171 GhcUnregisterised=@Unregisterised@
172
173 # Build a compiler with a native code generator backend
174 # (as well as a C backend)
175 #
176 # Target platforms supported:
177 # i386, powerpc, powerpc64, sparc
178 # IOS is not supported
179 ArchSupportsNCG=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc powerpc64 powerpc64le sparc)))
180 OsSupportsNCG=$(strip $(patsubst $(TargetOS_CPP), YES, $(patsubst ios,,$(TargetOS_CPP))))
181
182 GhcWithNativeCodeGen := $(strip\
183 $(if $(filter YESYESNO,\
184 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
185
186 # ArchSupportsSMP should be set iff there is support for that arch in
187 # includes/stg/SMP.h
188 ifeq "$(TargetArch_CPP)" "arm"
189 # We don't support load/store barriers pre-ARMv7. See #10433.
190 ArchSupportsSMP=$(if $(filter $(ARM_ISA),ARMv5 ARMv6),NO,YES)
191 else
192 ArchSupportsSMP=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 sparc powerpc powerpc64 powerpc64le aarch64)))
193 endif
194
195 # The THREADED_RTS requires `BaseReg` to be in a register and the
196 # `GhcUnregisterised` mode doesn't allow that.
197 GhcWithSMP := $(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
198
199 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
200 # has support for this OS/ARCH combination.
201
202 OsSupportsGHCi=$(strip $(patsubst $(TargetOS_CPP), YES, $(findstring $(TargetOS_CPP), mingw32 linux solaris2 freebsd dragonfly netbsd openbsd darwin kfreebsdgnu)))
203 ArchSupportsGHCi=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc powerpc64 powerpc64le sparc sparc64 arm aarch64)))
204
205 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
206 GhcWithInterpreter=YES
207 else
208 GhcWithInterpreter=$(if $(findstring YES,$(DYNAMIC_GHC_PROGRAMS)),YES,NO)
209 endif
210
211 # GhcEnableTablesNextToCode tells us whether the target architecture
212 # supports placing info tables directly before the entry code
213 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
214 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
215 # code or not, which may be decided by options to the compiler later.
216 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X powerpc64leX)" ""
217 GhcEnableTablesNextToCode=NO
218 else
219 GhcEnableTablesNextToCode=YES
220 endif
221
222 # Whether to use libffi for adjustors (foreign import "wrapper") or
223 # not. If we have built-in support (rts/Adjustor.c) then we use that,
224 # otherwise we fall back on libffi, which is slightly slower.
225 ArchHasAdjustorSupport = $(if $(findstring $(TargetArch_CPP),i386 x86_64),YES,NO)
226 ifeq "$(ArchHasAdjustorSupport)" "YES"
227 UseLibFFIForAdjustors=NO
228 else
229 UseLibFFIForAdjustors=YES
230 endif
231
232 # On Windows we normally want to make a relocatable bindist, to we
233 # ignore flags like libdir
234 ifeq "$(Windows_Host)" "YES"
235 RelocatableBuild = YES
236 else
237 RelocatableBuild = NO
238 endif
239
240 # needs to be after $(RelocatableBuild) is set above
241 include $(TOP)/mk/install.mk
242
243 # When building bindists we set this to yes so that the binaries are as
244 # portable as possible.
245 BeConservative = NO
246
247 ExtraMakefileSanityChecks = NO
248
249 #------------------------------------------------------------------------------
250 # Options for Libraries
251
252 # Which directory (in libraries/) contains the integer library?
253 INTEGER_LIBRARY=integer-gmp
254
255 # We build the libraries at least the "vanilla" way (way "v")
256 # Technically we don't need the v way if DYNAMIC_GHC_PROGRAMS is YES,
257 # but with -dynamic-too it's cheap, and makes life easier.
258 GhcLibWays = v
259
260 # In addition to the normal sequential way, the default is to also build
261 # profiled prelude libraries
262 # $(if $(filter ...)) allows controlling this expression from build.mk.
263 GhcLibWays += $(if $(filter $(BUILD_PROF_LIBS),NO),,p)
264
265 # Backward compatibility: although it would be cleaner to test for
266 # PlatformSupportsSharedLibs, or perhaps a new variable BUILD_SHARED_LIBS,
267 # some users currently expect that DYNAMIC_GHC_PROGRAMS=NO in build.mk implies
268 # that dyn is not added to GhcLibWays.
269 GhcLibWays += $(if $(filter $(DYNAMIC_GHC_PROGRAMS),NO),,dyn)
270
271 # Handy way to test whether we're building shared libs or not.
272 BuildSharedLibs=$(strip $(if $(findstring dyn,$(GhcLibWays)),YES,NO))
273
274 # In addition, the RTS is built in some further variations. Ways that
275 # make sense here:
276 #
277 # thr : threaded
278 # thr_p : threaded + profiled + eventlog
279 # debug : debugging + eventlog
280 # thr_debug : debugging + threaded, + eventlog
281 # l : eventlog
282 # p : profiled + eventlog
283 # thr_l : threaded + eventlog
284 #
285 # Note how there are a few cases which are handled specially (in packageHsLibs)
286 # to reduce the number of distinct ways,
287 #
288 # debug implies eventlog
289 # profiled implies eventlog
290 #
291 # This means, for instance, that there is no debug_l way.
292 #
293 GhcRTSWays=l
294
295 # Usually want the debug version
296 GhcRTSWays += debug
297
298 # We always have the threaded versions, but note that SMP support may be disabled
299 # (see GhcWithSMP).
300 GhcRTSWays += thr thr_debug thr_l
301 GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),thr_p,)
302 GhcRTSWays += $(if $(findstring dyn, $(GhcLibWays)),dyn debug_dyn thr_dyn thr_debug_dyn l_dyn thr_l_dyn,)
303
304 # We can only build GHCi threaded if we have a threaded RTS:
305 GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
306
307 # Option flags to pass to GHC when it's compiling modules in
308 # fptools/libraries. Typically these are things like -O or
309 # -dcore-lint or -H32m. The ones that are *essential* are wired into
310 # the build system.
311 #
312 # -O(2) is pretty desirable, otherwise no inlining of prelude
313 # things (incl "+") happens when compiling with this compiler
314
315 GhcLibHcOpts=-O2
316
317 # Strip local symbols from libraries? This can make the libraries smaller,
318 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
319 #
320 StripLibraries=NO
321
322 # ----------------------------------------------------------------------------
323 # Object-file splitting
324 #
325 # Set SplitObjs=YES or NO in your build.mk
326 #
327 # Don't use -split-objs in in GhcLibHcOpts, because the build
328 # system needs to do other special magic if you are
329 # doing object-file splitting
330
331 ArchSupportsSplitObjs=$(if $(filter \
332 $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO)#
333
334 # We used to support splitting on Darwin, but there is no point, since Darwin
335 # uses subsections via symbols
336 OsSupportsSplitObjs=$(if $(filter $(TargetOS_CPP),\
337 mingw32 linux solaris2 freebsd dragonfly netbsd openbsd),YES,NO)
338 SplitObjsBroken = @SplitObjsBroken@
339
340 SupportsSplitObjs := $(if $(and $(filter YES,$(ArchSupportsSplitObjs)),\
341 $(filter YES,$(OsSupportsSplitObjs)),\
342 $(filter NO,$(SplitObjsBroken)),\
343 $(filter YES,$(GhcWithNativeCodeGen))),YES,NO)
344
345 # By default, enable SplitObjs for the libraries if this build supports it.
346 # Unless SplitSections is enabled - then let that take precedence.
347 SplitObjs = $(if $(and $(filter YES,$(SupportsSplitObjs)),\
348 $(filter NO,$(SplitSections))),YES,NO)
349
350 # ----------------------------------------------------------------------------
351 # Section splitting
352 #
353 # Similar to -ffunction-sections -fdata-sections in GCC. Provides space saving
354 # like SplitObjs, but doesn't require post-processing and splitting of object
355 # files.
356 #
357 # Set SplitSections=YES or NO in your build.mk to override the default.
358 #
359 # This is not supported on Darwin (where you can use subsections-via-symbols
360 # instead) and Windows is disabled until we figure the linking performance
361 # issues related to BFD out. (See #11445, #12913 and related tickets.)
362 OsSupportsSplitSections=$(if $(filter $(TargetOS_CPP),mingw32 darwin),NO,YES)
363 SupportsSplitSections=$(if $(and $(filter YES,$(OsSupportsSplitSections)),\
364 $(filter YES,$(LdIsGNULd))),YES,NO)
365 SplitSections ?= $(SupportsSplitSections)
366
367 # ----------------------------------------------------------------------------
368
369 # There are a number of things which technically depend on GHC (e.g. if
370 # ghc changes then Haskell files may be compiled differently, or Cabal
371 # packages may be configured differently). By default we therefore
372 # have dependencies on the compiler executable.
373
374 # However, in practice, having a dependency on GHC is just a pain: We
375 # normally don't want to spend time recompiling other things while
376 # we're working on the compiler, and even if we did, GHC will normally
377 # decide compilation isn't needed anyway. So by setting LAX_DEPENDENCIES
378 # to YES you can turn these dependencies into order-only dependencies,
379 # i.e. GHC must exist, but if it's newer than other targets then
380 # rebuilding is not necessary.
381
382 LAX_DEPENDENCIES = NO
383
384 # ----------------------------------------------------------------------------
385 # Options for GHC's RTS
386
387 # Build an optimised RTS. Remember that we need to turn on
388 # optimisation both for C code (-optc-O2) and .cmm code (-O2). For
389 # the debugging RTS flavour, rts/ghc.mk overrides these to turn off
390 # optimisation.
391 GhcRtsHcOpts=-O2
392 GhcRtsCcOpts=-O2 -fomit-frame-pointer -g
393
394 # Configuration for libffi
395 UseSystemLibFFI=@UseSystemLibFFI@
396 # Flags to go into package.conf for rts
397 FFILibDir=@FFILibDir@
398 FFIIncludeDir=@FFIIncludeDir@
399
400 # GHC needs arch-specific tweak at least in
401 # rts/Libdw.c:set_initial_registers()
402 GhcRtsWithLibdw=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64),@UseLibdw@,NO))
403
404 ################################################################################
405 #
406 # Paths (see paths.mk)
407 #
408 ################################################################################
409
410 BINDIST = NO
411 BIN_DIST_NAME = ghc-$(ProjectVersion)
412 BIN_DIST_PREP_DIR = bindistprep/$(BIN_DIST_NAME)
413 BIN_DIST_PREP_TAR = bindistprep/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
414 BIN_DIST_PREP_TAR_COMP = $(BIN_DIST_PREP_TAR).$(TAR_COMP_EXT)
415 BIN_DIST_TAR_COMP = $(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.$(TAR_COMP_EXT)
416
417 # -----------------------------------------------------------------------------
418 # Utilities programs: flags
419
420 # If you want to give any standard flags to pretty much any utility
421 # (see utils.mk for a complete list), by adding a line here
422 #
423 # SRC_P_OPTS += ...
424 #
425 # where P is the utility. For example, to add -O to all Haskell
426 # compilations,
427 #
428 # SRC_HC_OPTS += -O
429
430
431 # SRC_HC_OPTS includes flags to be added to *every* Haskell
432 # compilation. Setting SRC_HC_OPTS is a good way to set the default
433 # optimisation level (-O) and heap size (-H<size>).
434 #
435 # SRC_HC_OPTS is *not* for adding flags that are required to make your
436 # build work. Examples:
437 #
438 # - instead of using -pgmc/-pgma-/-pgml, use the --with-gcc option to configure
439 #
440 # - if you need -optc, -opta, or -optl flags, the CONF_CC_* and CONF_LD_*
441 # variables are more appropriate (set via configure)
442 #
443 # Note that SRC_HC_OPTS are added to every Haskell compilation,
444 # including when using the bootstrapping compiler (stage 0), So don't
445 # put options here that are only supported by very recent GHCs.
446 #
447 SRC_HC_OPTS += -H32m -O
448
449
450 # See Note [Stage number in build variables].
451 SRC_HC_OPTS_STAGE0 =
452 SRC_HC_OPTS_STAGE1 =
453 SRC_HC_OPTS_STAGE2 =
454
455 # Warning suppression flags. See mk/warnings.mk.
456 SRC_CC_WARNING_OPTS =
457 SRC_HC_WARNING_OPTS =
458
459 # See Note [Stage number in build variables].
460 SRC_HC_WARNING_OPTS_STAGE0 =
461 SRC_HC_WARNING_OPTS_STAGE1 =
462 SRC_HC_WARNING_OPTS_STAGE2 =
463
464 # -----------------------------------------------------------------------------
465 # Names of programs in the GHC tree
466
467 MKDIRHIER = $(INPLACE_BIN)/mkdirhier
468
469 GENERATED_FILE = chmod a-w
470 EXECUTABLE_FILE = chmod +x
471
472 #-----------------------------------------------------------------------------
473 # Installed GHC
474
475 # $(GHC) points to installed version of the compiler.
476 #
477 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
478 # (because the version numbers have to be calculated).
479
480 GHC := @WithGhc@
481 # If we have a make dependency on c:/ghc/ghc, and the file is actually
482 # called c:/ghc/ghc.exe, then make will think that ghc doesn't exist
483 # and that it doesn't know how to create it.
484 ifneq "$(wildcard $(GHC).exe)" ""
485 GHC := $(GHC).exe
486 endif
487
488 GHC_STAGE0 = $(GHC)
489 GHC_STAGE1 = $(ghc-stage1_INPLACE)
490 GHC_STAGE2 = $(ghc-stage2_INPLACE)
491 GHC_STAGE3 = $(ghc-stage3_INPLACE)
492
493 BOOTSTRAPPING_CONF = libraries/bootstrapping.conf
494
495 INPLACE_PACKAGE_CONF = $(INPLACE_LIB)/package.conf.d
496
497 GhcVersion = @GhcVersion@
498 GhcPatchLevel = @GhcPatchLevel@
499 GhcMajVersion = @GhcMajVersion@
500 GhcMinVersion = @GhcMinVersion@
501
502 # Canonicalised ghc version number, used for easy (integer) version
503 # comparisons. We must expand $(GhcMinVersion) to two digits by
504 # adding a leading zero if necessary:
505 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
506 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
507 else
508 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
509 endif
510
511 GHC_PACKAGE_DB_FLAG = @GHC_PACKAGE_DB_FLAG@
512
513 #-----------------------------------------------------------------------------
514 # C compiler
515 #
516 # NB. Don't override $(CC) using build.mk, re-configure using
517 # the flag CC=<blah> instead. The reason is that the configure script
518 # needs to know which gcc you're using in order to perform its tests.
519
520 GccVersion = @GccVersion@
521
522 # TargetPlatformFull retains the string passed to configure so we have it in
523 # the necessary format to pass to libffi's configure.
524 TargetPlatformFull = @TargetPlatformFull@
525 GccIsClang = @GccIsClang@
526
527 CC = @CC@
528 CC_STAGE0 = @CC_STAGE0@
529 CC_STAGE1 = $(CC)
530 CC_STAGE2 = $(CC)
531 CC_STAGE3 = $(CC)
532
533 AS = @CC@
534 AS_STAGE0 = @CC_STAGE0@
535 AS_STAGE1 = $(AS)
536 AS_STAGE2 = $(AS)
537 AS_STAGE3 = $(AS)
538
539 # why no LD=@LD@ ?
540 LD_STAGE0 = @LD_STAGE0@
541 LD_STAGE1 = $(LD)
542 LD_STAGE2 = $(LD)
543 LD_STAGE3 = $(LD)
544
545 # Cross-compiling options
546 # See Note [CrossCompiling vs Stage1Only]
547 CrossCompiling = @CrossCompiling@
548
549 # Change this to YES if you're building a cross-compiler and don't
550 # want to build stage 2.
551 # See Note [CrossCompiling vs Stage1Only]
552 # See Note [Stage1Only vs stage=1]
553 Stage1Only = NO
554
555 # Installed tools prefix:
556 # we add prefix to crosscompiler GHC only (ghc-stage1),
557 # not cross-built GHC (not ghc-stage2).
558 CrossCompilePrefix = $(if $(filter YES,$(Stage1Only)),@CrossCompilePrefix@,)
559
560 # Install stage 2 by default, or stage 1 in the cross compiler
561 # case. Can be changed to 3
562 INSTALL_GHC_STAGE= $(if $(filter YES,$(Stage1Only)),1,2)
563
564 # Note [CrossCompiling vs Stage1Only]
565 #
566 # There are 4 possible settings:
567 #
568 # 1 CrossCompiling=NO Stage1Only=NO
569 # The default.
570 #
571 # 2 CrossCompiling=NO Stage1Only=YES
572 # Don't build ghc-stage2. See Note [Stage1Only vs stage=1].
573 #
574 # 3 CrossCompiling=YES Stage1Only=YES
575 # Building a cross-compiler (ghc-stage1). See [1] and
576 # Note [Stage1Only vs stage=1].
577 #
578 # 4 CrossCompiling=YES Stage1Only=NO
579 # Cross-compiling GHC itself. See [1].
580 #
581 # [1] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
582
583 # Note [Stage1Only vs stage=1]
584 #
585 # Stage1Only=YES means:
586 # - don't build ghc-stage2 (the executable)
587 # - don't build utils that rely on ghc-stage2
588 # See Note [No stage2 packages when CrossCompiling or Stage1Only] in
589 # ./ghc.mk.
590 # - install ghc-stage1 instead of ghc-stage2
591 # - install the ghc-pkg that was built with the stage0 compiler
592 # - (*do* still build compiler/stage2 (i.e. the ghc library))
593 # - (*do* still build all other libraries)
594 #
595 # stage=1 means:
596 # - don't build compiler/stage2 (i.e. the ghc library)
597 # - don't build ghc-stage2 (the executable)
598 # Note: these are the only two things it does. If you want to exclude more
599 # stuff, combine it with Stage1Only=YES, or run make in the ghc or compiler
600 # directory.
601 #
602 # running make in the ghc or compiler directory means:
603 # - don't build any packages in the libraries/ directory, except the ones
604 # listed in PACKAGES_STAGE0 (i.e. the boot libraries)
605 #
606 # You may wonder why Stage1Only=YES still builds compiler/stage2. Quoting
607 # simonmar in #7639:
608 #
609 # "strictly speaking building compiler/stage2 is correct, because it is
610 # the ghc package that can be used with [ghc-stage1]. If you don't
611 # want to build it, then setting stage=1 in your mk/build.mk should
612 # disable it."
613
614 # C compiler and linker flags from configure (e.g. -m<blah> to select
615 # correct C compiler backend). The stage number is the stage of GHC
616 # that is being used to compile with.
617 CONF_CC_OPTS_STAGE0 = @CONF_CC_OPTS_STAGE0@
618 CONF_CC_OPTS_STAGE1 = @CONF_CC_OPTS_STAGE1@
619 CONF_CC_OPTS_STAGE2 = @CONF_CC_OPTS_STAGE2@
620 CONF_GCC_LINKER_OPTS_STAGE0 = @CONF_GCC_LINKER_OPTS_STAGE0@
621 CONF_GCC_LINKER_OPTS_STAGE1 = @CONF_GCC_LINKER_OPTS_STAGE1@
622 CONF_GCC_LINKER_OPTS_STAGE2 = @CONF_GCC_LINKER_OPTS_STAGE2@
623 CONF_LD_LINKER_OPTS_STAGE0 = @CONF_LD_LINKER_OPTS_STAGE0@
624 CONF_LD_LINKER_OPTS_STAGE1 = @CONF_LD_LINKER_OPTS_STAGE1@
625 CONF_LD_LINKER_OPTS_STAGE2 = @CONF_LD_LINKER_OPTS_STAGE2@
626 CONF_CPP_OPTS_STAGE0 = @CONF_CPP_OPTS_STAGE0@
627 CONF_CPP_OPTS_STAGE1 = @CONF_CPP_OPTS_STAGE1@
628 CONF_CPP_OPTS_STAGE2 = @CONF_CPP_OPTS_STAGE2@
629 CONF_HC_OPTS_STAGE0 = @CONF_HC_OPTS_STAGE0@
630 CONF_HC_OPTS_STAGE1 = @CONF_HC_OPTS_STAGE1@
631 CONF_HC_OPTS_STAGE2 = @CONF_HC_OPTS_STAGE2@
632
633 # The .hsc files aren't currently safe for cross-compilation on Windows:
634 # libraries\haskeline\.\System\Console\Haskeline\Backend\Win32.hsc:160
635 # directive "let" is not safe for cross-compilation
636 ifneq "$(Windows_Host)" "YES"
637 SRC_HSC2HS_OPTS += --cross-safe
638 endif
639 SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
640
641 define set_stage_HSC2HS_OPTS
642 # $1 = stage
643 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(filter-out -O,$$(SRC_CC_OPTS) $$(CONF_CC_OPTS_STAGE$1)))
644 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(CONF_CPP_OPTS_STAGE$1))
645 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --lflag=,$$(CONF_GCC_LINKER_OPTS_STAGE$1))
646 endef
647 $(eval $(call set_stage_HSC2HS_OPTS,0))
648 $(eval $(call set_stage_HSC2HS_OPTS,1))
649 $(eval $(call set_stage_HSC2HS_OPTS,2))
650 ifeq "$(CrossCompiling)" "YES"
651 SRC_HSC2HS_OPTS_STAGE1 += --cross-compile
652 SRC_HSC2HS_OPTS_STAGE2 += --cross-compile
653 endif
654 SRC_HSC2HS_OPTS_STAGE0 += --cflag=-D$(HostArch_CPP)_HOST_ARCH --cflag=-D$(HostOS_CPP)_HOST_OS
655 SRC_HSC2HS_OPTS_STAGE1 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH --cflag=-D$(TargetOS_CPP)_HOST_OS
656 SRC_HSC2HS_OPTS_STAGE2 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH --cflag=-D$(TargetOS_CPP)_HOST_OS
657
658 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
659 WINDRES = $(INPLACE_MINGW)/bin/windres
660 else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
661 WINDRES = $(INPLACE_MINGW)/bin/windres
662 endif
663
664 #-----------------------------------------------------------------------------
665 # Mingwex Library
666 #
667 HaveLibMingwEx = @HaveLibMingwEx@
668 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
669 DLLTOOL = inplace/mingw/bin/dlltool.exe
670 else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
671 DLLTOOL = inplace/mingw/bin/dlltool.exe
672 endif
673
674 #-----------------------------------------------------------------------------
675 # Other standard (ha!) Unix utilities
676
677 AR = @ArCmd@
678 AR_OPTS = @ArArgs@
679 ArSupportsAtFile = @ArSupportsAtFile@
680
681 AR_STAGE0 = @AR_STAGE0@
682 AR_STAGE1 = $(AR)
683 AR_STAGE2 = $(AR)
684 AR_STAGE3 = $(AR)
685 AR_OPTS_STAGE0 = @AR_OPTS_STAGE0@
686 AR_OPTS_STAGE1 = $(AR_OPTS)
687 AR_OPTS_STAGE2 = $(AR_OPTS)
688 AR_OPTS_STAGE3 = $(AR_OPTS)
689 EXTRA_AR_ARGS_STAGE0 = $(EXTRA_AR_ARGS)
690 EXTRA_AR_ARGS_STAGE1 = $(EXTRA_AR_ARGS)
691 EXTRA_AR_ARGS_STAGE2 = $(EXTRA_AR_ARGS)
692 EXTRA_AR_ARGS_STAGE3 = $(EXTRA_AR_ARGS)
693 ArSupportsAtFile_STAGE0 = @ArSupportsAtFile_STAGE0@
694 ArSupportsAtFile_STAGE1 = $(ArSupportsAtFile)
695 ArSupportsAtFile_STAGE2 = $(ArSupportsAtFile)
696 ArSupportsAtFile_STAGE3 = $(ArSupportsAtFile)
697
698 CONTEXT_DIFF = @ContextDiffCmd@
699 CP = cp
700
701 # It's not easy to separate the CPP program from its flags, as
702 # AC_PROG_CPP defines CPP as "/usr/bin/gcc -E"
703 CPP = @CPP@ @CPPFLAGS@
704 HS_CPP = @HaskellCPPCmd@ @HaskellCPPArgs@
705
706 FIND = @FindCmd@
707
708 #
709 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
710 # install-sh script (if chosen). This not terribly useful to us, so we convert
711 # it into an abs. path.
712 #
713 INSTALL = @INSTALL@
714 INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))
715
716 LN_S = @LN_S@
717 MV = mv
718 PERL = @PerlCmd@
719 PIC = pic
720 RANLIB_CMD = @RANLIB_CMD@
721 REAL_RANLIB_CMD = @REAL_RANLIB_CMD@
722 SED = @SedCmd@
723 SHELL = @SHELL@
724
725 HaveDtrace = @HaveDtrace@
726 USE_DTRACE = $(HaveDtrace)
727 DTRACE = @DtraceCmd@
728
729 LD = @LdCmd@
730 NM = @NmCmd@
731 AR = @ArCmd@
732 OBJDUMP = @ObjdumpCmd@
733
734 CLANG = @ClangCmd@
735 LLC = @LlcCmd@
736 OPT = @OptCmd@
737
738 # GNU ld supports input via a linker script, which is useful to avoid
739 # overflowing command-line length limits.
740 LdIsGNULd = @LdIsGNULd@
741
742 # Set to YES if ld has the --build-id flag. Sometimes we need to
743 # disable it with --build-id=none.
744 LdHasBuildId = @LdHasBuildId@
745
746 # Set to YES if ld has the --no_compact_unwind flag. See #5019
747 # and compiler/main/DriverPipeline.hs.
748 LdHasNoCompactUnwind = @LdHasNoCompactUnwind@
749
750 # On MSYS, building with SplitObjs=YES fails with
751 # ar: Bad file number
752 # see #3201. We need to specify a smaller max command-line size
753 # to work around it. 32767 doesn't work; 30000 does, but says
754 # xargs: value for -s option should be < 28153
755 # so we now use 20000 to be comfortably below this bound
756 XARGS = xargs
757 ifeq "$(Windows_Host)" "YES"
758 XARGS_OPTS = -s 20000
759 endif
760
761 ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
762 STRIP_CMD = $(TOP)/inplace/mingw/bin/strip.exe
763 else ifeq "$(TARGETPLATFORM)" "arm-unknown-linux"
764 # The Cortex A8 hardware apparently has a bug which ld.gold will check for;
765 # however in order to do so it must have unstripped executables lest we
766 # see warnings of the form (see #10376, #10464),
767 #
768 # /usr/bin/ld.gold: warning: cannot scan executable section 1 of ... for
769 # Cortex-A8 erratum because it has no mapping symbols.
770 #
771 # Consequently we disabling stripping by default on this architecture.
772 # The hack of using `:` to disable stripping is implemented by ghc-cabal.
773 STRIP_CMD = :
774 else
775 STRIP_CMD = @StripCmd@
776 endif
777 PATCH_CMD = @PatchCmd@
778 TAR_CMD = @TarCmd@
779 BZIP2_CMD = @Bzip2Cmd@
780 GZIP_CMD = @GzipCmd@
781 XZ_CMD = @XzCmd@
782
783 # xz is default compression
784 TAR_COMP ?= xz
785
786 # select compression command and .tar extension based on TAR_COMP value
787 ifeq "$(TAR_COMP)" "bzip2"
788 TAR_COMP_CMD = $(BZIP2_CMD)
789 TAR_COMP_EXT = bz2
790 else ifeq "$(TAR_COMP)" "gzip"
791 TAR_COMP_CMD = $(GZIP_CMD)
792 TAR_COMP_EXT = gz
793 else ifeq "$(TAR_COMP)" "xz"
794 TAR_COMP_CMD = $(XZ_CMD)
795 TAR_COMP_EXT = xz
796 else
797 $(error $$(TAR_COMP) set to unknown value "$(TAR_COMP)" (supported: "bzip2", "gzip", "xz"))
798 endif
799
800 ifeq "$(Windows_Host)" "YES"
801 TOUCH_CMD = $(utils/touchy_dist_INPLACE)
802 TOUCH_DEP = $(TOUCH_CMD)
803 else
804 TOUCH_CMD = touch
805 TOUCH_DEP =
806 endif
807
808 HSCOLOUR_CMD = @HSCOLOUR@
809
810 TIME_CMD = @TimeCmd@
811
812 #-----------------------------------------------------------------------------
813 # Sphinx stuff
814
815 SPHINXBUILD = @SPHINXBUILD@
816 BUILD_MAN = @BUILD_MAN@
817 BUILD_SPHINX_HTML = @BUILD_SPHINX_HTML@
818 BUILD_SPHINX_PDF = @BUILD_SPHINX_PDF@
819 SPHINXOPTS = -D latex_paper_size=letter
820 XELATEX = @XELATEX@
821
822 #-----------------------------------------------------------------------------
823 # FPtools support software
824
825 #
826 # ghc-pkg
827 #
828 GHC_PKG = @GhcPkgCmd@
829
830 #
831 # Happy
832 #
833 HAPPY = @HappyCmd@
834 HAPPY_VERSION = @HappyVersion@
835 #
836 # Options to pass to Happy when we're going to compile the output with GHC
837 #
838 SRC_HAPPY_OPTS = -agc --strict
839
840 #
841 # Alex
842 #
843 ALEX = @AlexCmd@
844 ALEX_VERSION = @AlexVersion@
845 Alex3 = @Alex3@
846 #
847 # Options to pass to Alex when we're going to compile the output with GHC
848 #
849 SRC_ALEX_OPTS = -g
850 ifeq "$(Alex3)" "YES"
851 # The compiler isn't using the Unicode support in Alex 3.0 yet, in fact we do our own
852 # Unicode handling, so diable Alex's.
853 compiler_ALEX_OPTS = --latin1
854 endif
855
856 # Should we build haddock docs?
857 HADDOCK_DOCS = YES
858 # And HsColour the sources?
859 ifeq "$(HSCOLOUR_CMD)" ""
860 HSCOLOUR_SRCS = NO
861 else
862 HSCOLOUR_SRCS = YES
863 endif
864
865 # Build and install DPH?
866 BUILD_DPH = NO
867 # Build and install the "extra" packages (see ./packages)?
868 BUILD_EXTRA_PKGS = NO
869
870 ################################################################################
871 #
872 # Library configure arguments
873 #
874 ################################################################################
875
876 CONFIGURE_ARGS = @CONFIGURE_ARGS@
877
878 ################################################################################
879 #
880 # To be passed to sub-builds
881 #
882 ################################################################################
883
884 ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
885 ICONV_LIB_DIRS = @ICONV_LIB_DIRS@
886
887 GMP_INCLUDE_DIRS = @GMP_INCLUDE_DIRS@
888 GMP_LIB_DIRS = @GMP_LIB_DIRS@
889
890 CURSES_LIB_DIRS = @CURSES_LIB_DIRS@
891
892 # See Note [Disable -O2 in unregisterised mode]
893 # Be careful: 'GhcUnregisterised' should be defined earlier in this file.
894 ifeq "$(GhcUnregisterised)" "YES"
895 GhcStage1HcOpts=
896 GhcStage2HcOpts=
897 GhcStage3HcOpts=
898
899 GhcLibHcOpts=
900 endif
901
902 # Note [Disable -O2 in unregisterised mode]
903 # Disable -O2 optimization in unregisterised mode. Otherwise amount
904 # of generated C code # makes things very slow to compile (~5 minutes
905 # on core-i7 for 'compiler/hsSyn/HsExpr.hs') and sometimes not compile
906 # at all: powerpc64 overflows TOC section on 'compiler/hsSyn/HsExpr.hs'
907 # ia64 overflows short data section on 'compiler/main/DynFlags.hs'