Build system: delete REGULAR_INSTALL_DYNLIBS and INSTALL_DYNLIBS
[ghc.git] / ghc.mk
1 # -----------------------------------------------------------------------------
2 #
3 # (c) 2009-2013 The University of Glasgow
4 #
5 # This file is part of the GHC build system.
6 #
7 # To understand how the build system works and how to modify it, see
8 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
10 #
11 # -----------------------------------------------------------------------------
12
13 # ToDo List.
14 #
15 # * remove old Makefiles, add new stubs for building in subdirs
16 # * docs/Makefile
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/man/Makefile
19 # * docs/storage-mgmt/Makefile
20 # * docs/vh/Makefile
21 # * rts/dotnet/Makefile
22 # * utils/Makefile
23 # * add Makefiles for the rest of the utils/ programs that aren't built
24 # by default (need to exclude them from 'make all' too)
25
26 # Possible cleanups:
27 #
28 # * per-source-file dependencies instead of one .depend file?
29 # * eliminate undefined variables, and use --warn-undefined-variables?
30 # * put outputs from different ways in different subdirs of distdir/build,
31 # then we don't have to use -osuf/-hisuf. We would have to install
32 # them in different places too, so we'd need ghc-pkg support for packages
33 # of different ways.
34 # * make PACKAGES_STAGE1 generated by './configure' or './boot'?
35 # * we should use a directory of package.conf files rather than a single
36 # file for the inplace package database, so that we can express
37 # dependencies more accurately. Otherwise it's possible to get into
38 # a state where the package database is out of date, and the build
39 # system doesn't know.
40
41 # Approximate build order.
42 #
43 # The actual build order is defined by dependencies, and the phase
44 # ordering used to ensure correct ordering of makefile-generation; see
45 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
46 #
47 # * With bootstrapping compiler:
48 # o Build utils/ghc-cabal
49 # o Build utils/ghc-pkg
50 # o Build utils/hsc2hs
51 # o Build utils/genprimopcode
52 # o Build utils/deriveConstants
53 # * For each package:
54 # o configure, generate package-data.mk and inplace-pkg-config
55 # o register each package into inplace/lib/package.conf
56 # * build libffi (if not disabled by --with-system-libffi)
57 # * With bootstrapping compiler:
58 # o Build libraries/{filepath,hpc,Cabal}
59 # o Build compiler (stage 1)
60 # * With stage 1 compiler:
61 # o Build libraries/*
62 # o Build rts
63 # o Build utils/* (except haddock)
64 # o Build compiler (stage 2)
65 # * With stage 2 compiler:
66 # o Build utils/haddock
67 # o Build compiler (stage 3) (optional)
68 # * With haddock:
69 # o libraries/*
70 # o compiler
71
72 .PHONY: default all haddock
73
74 # We need second expansion for the way we handle directories, so that
75 # | $$$$(dir $$$$@)/.
76 # expands to the directory of a rule that uses a % pattern.
77 .SECONDEXPANSION:
78
79 default : all
80
81
82 ##################################################
83 # Check that we have a new enough 'make'
84
85 HAVE_EVAL := NO
86 $(eval HAVE_EVAL := YES)
87
88 ifeq "$(HAVE_EVAL)" "NO"
89 $(error Your make does not support eval. You need GNU make >= 3.81)
90 endif
91
92 ifeq "$(abspath /)" ""
93 $(error Your make does not support abspath. You need GNU make >= 3.81)
94 endif
95 ##################################################
96
97
98 # Catch make if it runs away into an infinite loop
99 ifeq "$(MAKE_RESTARTS)" ""
100 else ifeq "$(MAKE_RESTARTS)" "1"
101 else
102 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
103 endif
104
105 # -----------------------------------------------------------------------------
106 # Misc GNU make utils
107
108 nothing=
109 space=$(nothing) $(nothing)
110 comma=,
111
112 # -----------------------------------------------------------------------------
113 # Makefile debugging
114 #
115 # to see the effective value used for a Makefile variable, do
116 # make show VALUE=MY_VALUE
117 #
118
119 show:
120 @echo '$(VALUE)="$($(VALUE))"'
121
122 # echo is used by the nightly builders to query the build system for
123 # information.
124 # Using printf means that we don't get a trailing newline. We escape
125 # backslashes and double quotes in the string to protect them from the
126 # shell, and percent signs to protect them from printf.
127 echo:
128 @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))"
129
130 # -----------------------------------------------------------------------------
131 # Include subsidiary build-system bits
132
133 include mk/tree.mk
134
135 ifneq "$(CLEANING)" "YES"
136 include mk/config.mk
137 ifeq "$(ProjectVersion)" ""
138 $(error Please run ./configure first)
139 endif
140 endif
141
142 include mk/ways.mk
143 include mk/warnings.mk
144
145 # (Optional) build-specific configuration
146 include mk/custom-settings.mk
147 SRC_CC_OPTS += $(WERROR)
148 SRC_HC_OPTS += $(WERROR)
149
150 ifneq "$(CLEANING)" "YES"
151 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
152 ifeq "$(findstring dyn,$(GhcLibWays))" ""
153 $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
154 endif
155 else
156 ifeq "$(findstring v,$(GhcLibWays))" ""
157 $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
158 endif
159 endif
160 ifeq "$(GhcProfiled)" "YES"
161 ifeq "$(findstring p,$(GhcLibWays))" ""
162 $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
163 endif
164 endif
165 endif
166
167 ifeq "$(phase)" ""
168 phase = final
169 endif
170
171 # -----------------------------------------------------------------------------
172 # Utility definitions
173
174 include rules/prof.mk
175 include rules/trace.mk
176 include rules/library-path.mk
177 include rules/add-dependency.mk
178 include rules/make-command.mk
179 include rules/pretty_commands.mk
180
181 # -----------------------------------------------------------------------------
182 # Macros for standard targets
183
184 include rules/all-target.mk
185 include rules/clean-target.mk
186
187 # -----------------------------------------------------------------------------
188 # The inplace tree
189
190 $(eval $(call clean-target,root,inplace,inplace/bin inplace/lib))
191
192 # -----------------------------------------------------------------------------
193 # Whether to build dependencies or not
194
195 # When we're just doing 'make clean' or 'make show', then we don't need
196 # to build dependencies.
197
198 ifeq "$(CLEANING)" "YES"
199 NO_INCLUDE_DEPS = YES
200 NO_INCLUDE_PKGDATA = YES
201 endif
202 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
203 NO_INCLUDE_DEPS = YES
204 NO_INCLUDE_PKGDATA = YES
205 endif
206 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
207 NO_INCLUDE_DEPS = YES
208 # We want package-data.mk for show
209 endif
210
211 # -----------------------------------------------------------------------------
212 # Ways
213
214 include rules/way-prelims.mk
215
216 $(foreach way,$(ALL_WAYS),\
217 $(eval $(call way-prelims,$(way))))
218
219 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
220 GHCI_WAY = dyn
221 HADDOCK_WAY = dyn
222 else
223 GHCI_WAY = v
224 HADDOCK_WAY = v
225 endif
226
227 WINDOWS_DYN_PROG_RTS := rts
228 ifeq "$(GhcThreaded)" "YES"
229 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr
230 endif
231 ifeq "$(GhcDebugged)" "YES"
232 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
233 endif
234 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE
235
236 # -----------------------------------------------------------------------------
237 # Compilation Flags
238
239 include rules/distdir-opts.mk
240 include rules/distdir-way-opts.mk
241
242 # -----------------------------------------------------------------------------
243 # Finding source files and object files
244
245 include rules/hs-sources.mk
246 include rules/c-sources.mk
247 include rules/includes-sources.mk
248 include rules/hs-objs.mk
249 include rules/c-objs.mk
250 include rules/cmm-objs.mk
251
252 # -----------------------------------------------------------------------------
253 # Suffix rules
254
255 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
256 # so we don't make any when cleaning.
257 ifneq "$(CLEANING)" "YES"
258 include rules/hs-suffix-rules-srcdir.mk
259 include rules/hs-suffix-way-rules-srcdir.mk
260 include rules/hs-suffix-way-rules.mk
261 include rules/hi-rule.mk
262 include rules/c-suffix-rules.mk
263 include rules/cmm-suffix-rules.mk
264 endif
265
266 # -----------------------------------------------------------------------------
267 # Building package-data.mk files from .cabal files
268
269 include rules/package-config.mk
270
271 # -----------------------------------------------------------------------------
272 # Building dependencies
273
274 include rules/dependencies.mk
275 include rules/build-dependencies.mk
276 include rules/include-dependencies.mk
277
278 # -----------------------------------------------------------------------------
279 # Build package-data.mk files
280
281 include rules/build-package-data.mk
282
283 # -----------------------------------------------------------------------------
284 # Build and install a program
285
286 include rules/build-prog.mk
287 include rules/shell-wrapper.mk
288
289 # -----------------------------------------------------------------------------
290 # Build a perl script
291
292 include rules/build-perl.mk
293
294 # -----------------------------------------------------------------------------
295 # Build a package
296
297 include rules/build-package.mk
298 include rules/build-package-way.mk
299 include rules/haddock.mk
300 include rules/tags-package.mk
301 include rules/foreachLibrary.mk
302
303 # -----------------------------------------------------------------------------
304 # Registering hand-written package descriptions (used in rts)
305
306 include rules/manual-package-config.mk
307
308 # -----------------------------------------------------------------------------
309 # Docs
310
311 include rules/docbook.mk
312
313 # -----------------------------------------------------------------------------
314 # Making bindists and sdists
315
316 include rules/bindist.mk
317 include rules/sdist-ghc-file.mk
318
319 # -----------------------------------------------------------------------------
320 # Directories
321
322 # Don't try to delete directories:
323 .PRECIOUS: %/.
324
325 # Create build directories on demand. NB. the | below: this indicates
326 # that $(MKDIRHIER) is an order-only dependency, which means that this
327 # rule fires after building mkdirhier, but we won't try to recreate
328 # directories if mkdirhier changes.
329 %/. : | $(MKDIRHIER)
330 "$(MKDIRHIER)" $@
331
332 # -----------------------------------------------------------------------------
333 # Lax dependencies
334
335 ifeq "$(LAX_DEPENDENCIES)" "YES"
336 LAX_DEPS_FOLLOW = |
337 else
338 LAX_DEPS_FOLLOW =
339 endif
340
341 # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
342 # looking like
343 # target: a | b | c
344 # The first | signals the start of the order-only dependencies, but make
345 # treats the second | as a dependency. So we need to tell make how to
346 # build that dependency.
347
348 .PHONY: |
349 | :
350 @:
351
352 # -----------------------------------------------------------------------------
353 # Packages to build
354 # The lists of packages that we *actually* going to build in each stage:
355 #
356 # $(PACKAGES_STAGE0)
357 # $(PACKAGES_STAGE1)
358 # $(PACKAGES_STAGE2)
359 #
360 # Note that we need to add them to these variables in dependency
361 # order, as this is the order that they get configured in.
362
363 ifeq "$(CLEANING)" "YES"
364
365 define addLibraryForCleaning
366 # We just add all packages to both the stage 0 and stage 1 lists.
367 # Stage 2 gets cleaned in the same way as stage 1, so no need to
368 # add it there.
369 PACKAGES_STAGE0 += $1
370 PACKAGES_STAGE1 += $1
371 endef
372 $(eval $(call foreachLibrary,addLibraryForCleaning))
373
374 else # CLEANING
375
376 # Packages that are built by stage0. These packages are dependencies of
377 # programs such as GHC and ghc-pkg, that we do not assume the stage0
378 # compiler already has installed (or up-to-date enough).
379
380 PACKAGES_STAGE0 = binary Cabal/Cabal hpc bin-package-db hoopl transformers template-haskell
381 ifeq "$(Windows_Host)" "NO"
382 ifneq "$(HostOS_CPP)" "ios"
383 PACKAGES_STAGE0 += terminfo
384 endif
385 endif
386
387 PACKAGES_STAGE1 += ghc-prim
388 PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
389 PACKAGES_STAGE1 += base
390 PACKAGES_STAGE1 += filepath
391 PACKAGES_STAGE1 += array
392 PACKAGES_STAGE1 += deepseq
393 PACKAGES_STAGE1 += bytestring
394 PACKAGES_STAGE1 += containers
395
396 ifeq "$(Windows_Host)" "YES"
397 PACKAGES_STAGE1 += Win32
398 endif
399 PACKAGES_STAGE1 += time
400 ifeq "$(Windows_Host)" "NO"
401 PACKAGES_STAGE1 += unix
402 endif
403
404 PACKAGES_STAGE1 += directory
405 PACKAGES_STAGE1 += process
406 PACKAGES_STAGE1 += hpc
407 PACKAGES_STAGE1 += pretty
408 PACKAGES_STAGE1 += template-haskell
409 PACKAGES_STAGE1 += binary
410 PACKAGES_STAGE1 += Cabal/Cabal
411 PACKAGES_STAGE1 += bin-package-db
412 PACKAGES_STAGE1 += hoopl
413 PACKAGES_STAGE1 += transformers
414
415 ifeq "$(HADDOCK_DOCS)" "YES"
416 PACKAGES_STAGE1 += xhtml
417 endif
418
419 ifeq "$(Windows_Target)" "NO"
420 ifneq "$(TargetOS_CPP)" "ios"
421 PACKAGES_STAGE1 += terminfo
422 endif
423 endif
424 PACKAGES_STAGE1 += haskeline
425
426 # We normally install only the packages down to this point
427 REGULAR_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
428 ifneq "$(Stage1Only)" "YES"
429 REGULAR_INSTALL_PACKAGES += compiler
430 endif
431 REGULAR_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
432
433 ifneq "$(CrossCompiling)" "YES"
434 define addExtraPackage
435 ifeq "$2" "-"
436 # Do nothing; this package is already handled above
437 else ifeq "$2" "dph"
438 ## DPH-specific clause
439 ifeq "$$(GhcProfiled)" "YES"
440 # Ignore package: The DPH packages need TH, which is incompatible with
441 # a profiled GHC
442 else ifneq "$$(BUILD_DPH)" "YES"
443 # Ignore package: DPH was disabled
444 else
445 PACKAGES_STAGE2 += $1
446 endif
447 ## end of DPH-specific clause
448 else
449 PACKAGES_STAGE2 += $1
450 endif
451 endef
452 $(eval $(call foreachLibrary,addExtraPackage))
453 endif
454
455 # If we want to just install everything, then we want all the packages
456 SUPERSIZE_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
457 ifneq "$(Stage1Only)" "YES"
458 SUPERSIZE_INSTALL_PACKAGES += compiler
459 endif
460 SUPERSIZE_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
461
462 ifeq "$(InstallExtraPackages)" "NO"
463 INSTALL_PACKAGES := $(REGULAR_INSTALL_PACKAGES)
464 else
465 INSTALL_PACKAGES := $(SUPERSIZE_INSTALL_PACKAGES)
466 endif
467
468 endif # CLEANING
469
470 # -------------------------------------------
471 # Dependencies between package-data.mk files
472
473 # We cannot run ghc-cabal to configure a package until we have
474 # configured and registered all of its dependencies. So the following
475 # hack forces all the configure steps to happen in exactly the following order:
476 #
477 # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
478 #
479 # Ideally we should use the correct dependencies here to allow more
480 # parallelism, but we don't know the dependencies until we've
481 # generated the package-data.mk files.
482 define fixed_pkg_dep
483 libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev)
484 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
485 endef
486
487 ifneq "$(BINDIST)" "YES"
488 fixed_pkg_prev=
489 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
490
491 # the GHC package doesn't live in libraries/, so we add its dependency manually:
492 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
493 fixed_pkg_prev:=compiler/stage2/package-data.mk
494
495 # and continue with PACKAGES_STAGE2, which depend on GHC:
496 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
497
498 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
499 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
500 # haddock depends on ghc and some libraries, but depending on GHC's
501 # package-data.mk is sufficient, as that in turn depends on all the
502 # libraries
503 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
504 utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
505 utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
506
507 utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
508 utils/dll-split/dist-install/package-data.mk: compiler/stage2/package-data.mk
509 utils/hpc/dist-install/package-data.mk: compiler/stage2/package-data.mk
510 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
511 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
512 utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
513 utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
514 utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
515
516 # add the final package.conf dependency: ghc-prim depends on RTS
517 libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace
518 endif
519
520 # --------------------------------
521 # Misc package-related settings
522
523 # Run Haddock for the packages that will be installed. We need to handle
524 # compiler specially due to the different dist directory name.
525 $(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES))
526 compiler_stage2_DO_HADDOCK = YES
527
528 BOOT_PKG_CONSTRAINTS := \
529 $(foreach d,$(PACKAGES_STAGE0),\
530 $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
531 --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
532
533 # The actual .a and .so/.dll files: needed for dependencies.
534 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_v_LIB))
535 ifeq "$(BuildSharedLibs)" "YES"
536 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
537 endif
538 BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
539
540 # ----------------------------------------
541 # Special magic for the ghc-prim package
542
543 # We want the ghc-prim package to include the GHC.Prim module when it
544 # is registered, but not when it is built, because GHC.Prim is not a
545 # real source module, it is built-in to GHC. The old build system did
546 # this using Setup.hs, but we can't do that here, so we have a flag to
547 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
548 # remains compatible with the old build system for the time being).
549 # GHC.Prim module in the ghc-prim package with a flag:
550 #
551 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
552
553 # And then we strip it out again before building the package:
554 define libraries/ghc-prim_PACKAGE_MAGIC
555 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
556 endef
557
558 PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt
559
560 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/.
561 "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@
562
563 # Required so that Haddock documents the primops.
564 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
565
566 # ----------------------------------------
567 # Special magic for the integer package
568
569 ifneq "$(CLEANING)" "YES"
570 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
571 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp
572 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
573 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
574 else
575 $(error Unknown integer library: $(INTEGER_LIBRARY))
576 endif
577 endif
578
579 # -----------------------------------------------------------------------------
580 # Include build instructions from all subdirs
581
582 ifneq "$(BINDIST)" "YES"
583 BUILD_DIRS += utils/mkdirhier
584 endif
585
586 ifeq "$(Windows_Host)" "YES"
587 BUILD_DIRS += utils/touchy
588 endif
589
590 BUILD_DIRS += utils/unlit
591 BUILD_DIRS += utils/hp2ps
592
593 ifneq "$(GhcUnregisterised)" "YES"
594 BUILD_DIRS += driver/split
595 endif
596
597 ifneq "$(BINDIST)" "YES"
598 BUILD_DIRS += utils/genprimopcode
599 endif
600
601 BUILD_DIRS += driver
602 BUILD_DIRS += driver/ghci
603 BUILD_DIRS += driver/ghc
604 BUILD_DIRS += driver/haddock
605 BUILD_DIRS += libffi
606 BUILD_DIRS += utils/deriveConstants
607 BUILD_DIRS += includes
608 BUILD_DIRS += rts
609
610 ifneq "$(BINDIST)" "YES"
611 BUILD_DIRS += bindisttest
612 BUILD_DIRS += utils/genapply
613 endif
614
615 # When cleaning, don't add any library packages to BUILD_DIRS. We include
616 # ghc.mk files for all BUILD_DIRS, but they don't exist until after running
617 # `./boot`. Running `make clean` before anything else, as well as running
618 # `make maintainer-clean` twice, should work.
619 ifneq "$(CLEANING)" "YES"
620 # These are deliberately in reverse order, so as to ensure that
621 # there is no need to have them in dependency order. That's important
622 # because it's tricky to ensure that they are in dependency order when
623 # cross-compiling, as some packages may only be in PACKAGES_STAGE0
624 # or PACKAGES_STAGE1.
625 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
626 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
627 BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
628 ifeq "$(BUILD_DPH)" "YES"
629 # Note: `$(eval $(call foreachLibrary,addExtraPackage))` above adds the
630 # packages listed in `libraries/dph/ghc-packages` (e.g. dph-base) to
631 # PACKAGES_STAGE2. But not 'libraries/dph' itself (it doesn't have a cabal
632 # file). Since it does have a ghc.mk file, we add it to BUILD_DIRS here.
633 BUILD_DIRS += $(wildcard libraries/dph)
634 endif
635 endif
636
637
638 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
639 BUILD_DIRS += libraries/integer-gmp/gmp
640 else ifeq "$(CLEANING)" "YES"
641 BUILD_DIRS += libraries/integer-gmp/gmp
642 endif
643
644 ifeq "$(HADDOCK_DOCS)" "YES"
645 BUILD_DIRS += utils/haddock
646 BUILD_DIRS += utils/haddock/doc
647 else ifeq "$(CLEANING)" "YES"
648 BUILD_DIRS += utils/haddock
649 BUILD_DIRS += utils/haddock/doc
650 endif
651
652 BUILD_DIRS += compiler
653 BUILD_DIRS += utils/hsc2hs
654 BUILD_DIRS += utils/ghc-pkg
655 BUILD_DIRS += utils/testremove
656 ifneq "$(Stage1Only)" "YES"
657 BUILD_DIRS += utils/ghctags
658 endif
659 BUILD_DIRS += utils/dll-split
660 BUILD_DIRS += utils/ghc-pwd
661 BUILD_DIRS += utils/ghc-cabal
662 BUILD_DIRS += utils/hpc
663 ifeq "$(GhcWithInterpreter)" "YES"
664 BUILD_DIRS += utils/runghc
665 else ifeq "$(CLEANING)" "YES"
666 BUILD_DIRS += utils/runghc
667 endif
668 BUILD_DIRS += ghc
669
670 ifneq "$(BINDIST)" "YES"
671 ifneq "$(CrossCompiling)-$(phase)" "YES-final"
672 BUILD_DIRS += utils/mkUserGuidePart
673 endif
674 endif
675
676 BUILD_DIRS += docs/users_guide
677 BUILD_DIRS += docs/man
678 BUILD_DIRS += utils/count_lines
679 BUILD_DIRS += utils/compare_sizes
680
681 # ----------------------------------------------
682 # Actually include all the sub-ghc.mk's
683
684 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
685
686 # A useful pseudo-target (must be after the include above, because it needs
687 # the value of things like $(libraries/base_dist-install_v_LIB).
688 .PHONY: stage1_libs
689 stage1_libs : $(ALL_STAGE1_LIBS)
690
691 # ----------------------------------------------
692 # Per-package compiler flags
693 #
694 # If you want to add per-package compiler flags, see `mk/warnings.mk`.
695
696 # Add $(GhcLib(Extra)HcOpts) to all package builds
697 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
698 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts)))
699
700 # Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds
701 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
702 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts)))
703
704 # -----------------------------------------------------------------------------
705 # Bootstrapping libraries
706
707 # We need to build a few libraries with the installed GHC, since GHC itself
708 # and some of the tools depend on them:
709
710 ifneq "$(BINDIST)" "YES"
711
712 ifneq "$(BOOTSTRAPPING_CONF)" ""
713 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
714 $(shell $(GHC_PKG) init $(BOOTSTRAPPING_CONF))
715 endif
716 endif
717
718 $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
719
720 # register the boot packages in strict sequence, because running
721 # multiple ghc-pkgs in parallel doesn't work (registrations may get
722 # lost).
723 fixed_pkg_prev=
724 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
725 utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
726 compiler/stage1/package-data.mk: $(fixed_pkg_prev)
727 endif
728
729 ifneq "$(BINDIST)" "YES"
730 # Make sure we have all the GHCi libs by the time we've built
731 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
732 # GHCi libs, and we don't have a better way to express that dependency.
733 #
734 GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
735 $(compiler_stage2_GHCI_LIB)
736
737 ifeq "$(UseArchivesForGhci)" "NO"
738 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
739 endif
740
741 ifeq "$(UseArchivesForGhci)" "YES"
742 GHCI_lib_way = v
743 else
744 GHCI_lib_way = GHCI
745 endif
746
747 # Deps for TH uses in libraries
748 $(foreach way, $(GhcLibWays),$(eval \
749 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
750 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
751 ))
752 endif
753
754 # -----------------------------------------------
755 # Haddock-related bits
756
757 # Build the Haddock contents and index
758 ifeq "$(HADDOCK_DOCS)" "YES"
759 libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES)
760 cd libraries && sh gen_contents_index --intree
761 ifeq "$(phase)" "final"
762 $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
763 endif
764 INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
765 endif
766
767 # -----------------------------------------------------------------------------
768 # Creating a local mingw copy on Windows
769
770 ifeq "$(Windows_Host)" "YES"
771
772 install : install_mingw
773 .PHONY: install_mingw
774 install_mingw : $(INPLACE_MINGW)
775 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
776
777 install : install_perl
778 .PHONY: install_perl
779 install_perl : $(INPLACE_PERL)
780 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
781
782 endif # Windows_Host
783
784 ifneq "$(BINDIST)" "YES"
785 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
786 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
787 endif # BINDIST
788
789 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
790 $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \
791 | $$(dir $$@)/.
792 "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@
793
794 .PHONY: tags
795 tags: tags_compiler
796
797 .PHONY: TAGS
798 TAGS: TAGS_compiler
799
800 # -----------------------------------------------------------------------------
801 # Installation
802
803 install: install_libs install_packages install_libexecs \
804 install_bins install_topdirs
805 ifeq "$(HADDOCK_DOCS)" "YES"
806 install: install_docs
807 endif
808
809 define installLibsTo
810 # $1 = libraries to install
811 # $2 = directory to install to
812 $(call INSTALL_DIR,$2)
813 for i in $1; do \
814 case $$i in \
815 *.a) \
816 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
817 $(RANLIB_CMD) $2/`basename $$i` ;; \
818 *.dll) \
819 $(call INSTALL_PROGRAM,$(INSTALL_OPTS),$$i,$2) ; \
820 $(STRIP_CMD) $2/`basename $$i` ;; \
821 *.so) \
822 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2) ;; \
823 *.dylib) \
824 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2);; \
825 *) \
826 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
827 esac; \
828 done
829 endef
830
831 install_bins: $(INSTALL_BINS)
832 $(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
833 for i in $(INSTALL_BINS); do \
834 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ; \
835 done
836
837 install_libs: $(INSTALL_LIBS)
838 $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
839
840 install_libexecs: $(INSTALL_LIBEXECS)
841 ifeq "$(INSTALL_LIBEXECS)" ""
842 @:
843 else
844 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)/bin")
845 for i in $(INSTALL_LIBEXECS); do \
846 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)/bin"); \
847 done
848 # We rename ghc-stage2, so that the right program name is used in error
849 # messages etc.
850 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
851 endif
852
853 install_topdirs: $(INSTALL_TOPDIRS)
854 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
855 for i in $(INSTALL_TOPDIRS); do \
856 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
857 done
858
859 install_docs: $(INSTALL_DOCS)
860 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
861 ifneq "$(INSTALL_DOCS)" ""
862 for i in $(INSTALL_DOCS); do \
863 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
864 done
865 endif
866 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
867 $(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
868 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
869 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
870 for i in $(INSTALL_LIBRARY_DOCS); do \
871 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
872 done
873 $(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
874 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
875 endif
876 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
877 for i in $(INSTALL_HTML_DOC_DIRS); do \
878 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
879 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
880 done
881 endif
882
883 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
884
885 # Install packages in the right order, so that ghc-pkg doesn't complain.
886 # Also, install ghc-pkg first.
887 ifeq "$(Windows_Host)" "NO"
888 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc
889 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg
890 else
891 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
892 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
893 endif
894
895 # Set the INSTALL_DISTDIR_p for each package; compiler is special
896 $(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\
897 $(eval INSTALL_DISTDIR_$p = dist-install))
898 INSTALL_DISTDIR_compiler = stage2
899
900 # Now we can do the installation
901 install_packages: install_libexecs
902 install_packages: rts/dist/package.conf.install
903 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
904 $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
905 $(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
906 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)/rts")
907 $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts")
908 $(foreach p, $(INSTALL_PACKAGES), \
909 $(call make-command, \
910 "$(ghc-cabal_INPLACE)" copy \
911 $p $(INSTALL_DISTDIR_$p) \
912 "$(STRIP_CMD)" \
913 '$(DESTDIR)' \
914 '$(prefix)' \
915 '$(ghclibdir)' \
916 '$(docdir)/html/libraries' \
917 '$(GhcLibWays)'))
918 "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install
919 $(foreach p, $(INSTALL_PACKAGES), \
920 $(call make-command, \
921 "$(ghc-cabal_INPLACE)" register \
922 $p $(INSTALL_DISTDIR_$p) \
923 "$(INSTALLED_GHC_REAL)" \
924 "$(INSTALLED_GHC_PKG_REAL)" \
925 "$(DESTDIR)$(topdir)" \
926 '$(DESTDIR)' \
927 '$(prefix)' \
928 '$(ghclibdir)' \
929 '$(docdir)/html/libraries' \
930 $(RelocatableBuild)))
931 # when we install the packages above, ghc-pkg obeys umask when creating
932 # the package.conf files, but for everything else we specify the
933 # permissions. We therefore now fix the permissions of package.cache.
934 # This means "sudo make install" does the right thing even if it runs
935 # with an 077 umask.
936 for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
937
938 # -----------------------------------------------------------------------------
939 # Binary distributions
940
941 ifneq "$(CLEANING)" "YES"
942 # This rule seems to hold some files open on Windows which prevents
943 # cleaning, perhaps due to the $(wildcard).
944
945 $(eval $(call bindist-list,.,\
946 LICENSE \
947 README \
948 INSTALL \
949 configure config.sub config.guess install-sh \
950 settings.in \
951 packages \
952 Makefile \
953 mk/config.mk.in \
954 $(INPLACE_BIN)/mkdirhier \
955 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
956 utils/ghc-pwd/dist-install/build/tmp/ghc-pwd \
957 $(BINDIST_WRAPPERS) \
958 $(BINDIST_PERL_SOURCES) \
959 $(BINDIST_LIBS) \
960 $(BINDIST_HI) \
961 $(BINDIST_EXTRAS) \
962 $(includes_H_FILES) \
963 $(includes_DERIVEDCONSTANTS) \
964 $(includes_GHCCONSTANTS) \
965 $(libffi_HEADERS) \
966 $(INSTALL_LIBEXECS) \
967 $(INSTALL_LIBEXEC_SCRIPTS) \
968 $(INSTALL_TOPDIRS) \
969 $(INSTALL_BINS) \
970 $(INSTALL_MANPAGES) \
971 $(INSTALL_DOCS) \
972 $(INSTALL_LIBRARY_DOCS) \
973 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
974 docs/index.html \
975 compiler/stage2/doc \
976 $(wildcard libraries/*/dist-install/doc/) \
977 $(wildcard libraries/*/*/dist-install/doc/) \
978 $(filter-out settings,$(INSTALL_LIBS)) \
979 $(RTS_INSTALL_LIBS) \
980 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
981 mk/project.mk \
982 mk/install.mk.in \
983 bindist.mk \
984 libraries/gen_contents_index \
985 libraries/prologue.txt \
986 $(wildcard libraries/dph/LICENSE \
987 libraries/dph/ghc-packages \
988 libraries/dph/ghc-packages2 \
989 libraries/dph/ghc-stage2-package) \
990 ))
991 endif
992 # mk/project.mk gets an absolute path, so we manually include it in
993 # the bindist with a relative path
994
995 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
996
997 unix-binary-dist-prep:
998 $(call removeTrees,bindistprep/)
999 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1000 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1001 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1002 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1003 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1004 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1005 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1006 echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
1007 echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK)
1008 cd $(BIN_DIST_PREP_DIR) && autoreconf
1009 $(call removeFiles,$(BIN_DIST_PREP_TAR))
1010 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1011 # tree then we want to include the real file, not a symlink to it
1012 cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1013
1014 windows-binary-dist-prep:
1015 $(call removeTrees,bindistprep/)
1016 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1017 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1018
1019 # tryTimes tries to run its third argument multiple times, until it
1020 # succeeds. Don't call it directly; call try10Times instead.
1021 # The first and second argument to tryTimes are lists of values.
1022 # The length of the first argument is the number of times we have
1023 # already tried. The length of the second argument is the number more
1024 # times we will try.
1025 tryTimes = $(if $2, \
1026 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1027 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1028 )
1029
1030 # Try to run the argument 10 times. If all 10 fail, fail.
1031 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1032
1033 .PHONY: publish-binary-dist
1034 publish-binary-dist:
1035 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist)
1036
1037 ifeq "$(mingw32_TARGET_OS)" "1"
1038 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
1039 else
1040 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc
1041 endif
1042
1043 .PHONY: publish-docs
1044 publish-docs:
1045 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1046
1047 # -----------------------------------------------------------------------------
1048 # Source distributions
1049
1050 # Do it like this:
1051 #
1052 # $ ./boot
1053 # $ ./configure
1054 # $ make sdist
1055 #
1056
1057 # A source dist is built from a (partial) build tree, because we
1058 # require some extra files not contained in a git checkout: the
1059 # output from Happy and Alex, for example.
1060 #
1061 # The steps performed by 'make sdist' are as follows:
1062 # - build those extra files
1063 # - create a complete link-tree of the current build tree in /tmp
1064 # - run 'make distclean' on that tree
1065 # - remove a bunch of other files that we know shouldn't be in the dist
1066
1067 #
1068 # Directory in which we're going to build the src dist
1069 #
1070 SRC_DIST_ROOT = sdistprep
1071 SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)
1072
1073 SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
1074 SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
1075 SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
1076 SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT)
1077
1078 SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src
1079 SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs
1080 SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
1081 SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT)
1082
1083 SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
1084 SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
1085 SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
1086 SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT)
1087
1088 #
1089 # Files to include in source distributions
1090 #
1091 SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1092 utils docs rts compiler ghc driver libraries libffi-tarballs
1093 SRC_DIST_GHC_FILES += \
1094 configure.ac config.guess config.sub configure \
1095 aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \
1096 install-sh settings.in VERSION GIT_COMMIT_ID \
1097 boot packages ghc.mk MAKEHELP.md
1098
1099 .PHONY: VERSION
1100 VERSION:
1101 @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \
1102 then echo "$@ needs no update"; \
1103 else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi
1104
1105 .PHONY: GIT_COMMIT_ID
1106 GIT_COMMIT_ID:
1107 @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \
1108 echo "******************************************************************************"; \
1109 echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \
1110 echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \
1111 echo "Please re-run './configure' before creating source-distribution"; \
1112 echo "******************************************************************************"; \
1113 exit 1; \
1114 fi
1115 @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \
1116 then echo "$@ needs no update"; \
1117 else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi
1118
1119 sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID
1120
1121 # Extra packages which shouldn't be in the source distribution: see #8801
1122 EXTRA_PACKAGES=parallel stm random primitive vector dph
1123
1124 .PHONY: sdist-ghc-prep-tree
1125 sdist-ghc-prep-tree :
1126 $(call removeTrees,$(SRC_DIST_GHC_ROOT))
1127 $(call removeFiles,$(SRC_DIST_GHC_TARBALL))
1128 mkdir -p $(SRC_DIST_ROOT)
1129 mkdir -p $(SRC_DIST_GHC_ROOT)
1130 mkdir -p $(SRC_DIST_GHC_DIR)
1131 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1132 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
1133 cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
1134 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
1135 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
1136 $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
1137 $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
1138 for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done
1139 cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1140
1141 # Add files generated by alex and happy.
1142 # These rules depend on sdist-ghc-prep-tree.
1143 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x))
1144 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y))
1145 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x))
1146 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y))
1147 $(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y))
1148 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x))
1149 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y))
1150
1151 .PHONY: sdist-ghc-prep
1152 sdist-ghc-prep : sdist-ghc-prep-tree
1153
1154 .PHONY: sdist-windows-tarballs-prep
1155 sdist-windows-tarballs-prep :
1156 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT))
1157 $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL))
1158 mkdir -p $(SRC_DIST_ROOT)
1159 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
1160 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)
1161 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
1162 cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs
1163 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git)
1164
1165 .PHONY: sdist-testsuite-prep
1166 sdist-testsuite-prep :
1167 $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
1168 $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
1169 mkdir -p $(SRC_DIST_ROOT)
1170 mkdir -p $(SRC_DIST_TESTSUITE_ROOT)
1171 mkdir -p $(SRC_DIST_TESTSUITE_DIR)
1172 mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite
1173 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
1174 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean
1175
1176 .PHONY: sdist-ghc
1177 sdist-ghc: sdist-ghc-prep
1178 cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL)
1179
1180 .PHONY: sdist-windows-tarballs
1181 sdist-windows-tarballs: sdist-windows-tarballs-prep
1182 cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
1183
1184 .PHONY: sdist-testsuite
1185 sdist-testsuite: sdist-testsuite-prep
1186 cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
1187
1188
1189 .PHONY: sdist
1190 sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite
1191
1192 sdist-manifest : $(SRC_DIST_GHC_TARBALL)
1193 tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1194
1195 # Upload the distribution(s)
1196 # Retrying is to work around buggy firewalls that corrupt large file transfers
1197 # over SSH.
1198 ifneq "$(PublishLocation)" ""
1199 publish-sdist :
1200 $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist)
1201 $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist)
1202 endif
1203
1204 # -----------------------------------------------------------------------------
1205 # sdisting libraries
1206
1207 # Use manually, with e.g.:
1208 # make sdist_directory
1209
1210 sdist_%:
1211 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1212
1213 # -----------------------------------------------------------------------------
1214 # Cleaning
1215
1216 .PHONY: clean
1217
1218 CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h
1219 CLEAN_FILES += libraries/base/include/EventConfig.h
1220 CLEAN_FILES += mk/config.mk.old
1221 CLEAN_FILES += mk/project.mk.old
1222 CLEAN_FILES += compiler/ghc.cabal.old
1223
1224 # These are no longer generated, but we still clean them for a while
1225 # as they may still be in old GHC trees:
1226 CLEAN_FILES += includes/GHCConstants.h
1227 CLEAN_FILES += includes/DerivedConstants.h
1228 CLEAN_FILES += includes/ghcautoconf.h
1229 CLEAN_FILES += includes/ghcplatform.h
1230 CLEAN_FILES += includes/ghcversion.h
1231 CLEAN_FILES += utils/ghc-pkg/Version.hs
1232 CLEAN_FILES += compiler/prelude/primops.txt
1233 CLEAN_FILES += $(wildcard compiler/primop*incl)
1234
1235 clean : clean_files clean_libraries
1236
1237 .PHONY: clean_files
1238 clean_files :
1239 $(call removeFiles,$(CLEAN_FILES))
1240 # this is here since CLEAN_FILES can't handle folders
1241 $(call removeTrees,includes/dist-derivedconstants)
1242 $(call removeTrees,inplace/bin)
1243 $(call removeTrees,inplace/lib)
1244 $(call removeTrees,libraries/bootstrapping.conf)
1245
1246 .PHONY: clean_libraries
1247 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
1248 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0))
1249
1250 clean_libraries:
1251 $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1252 $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))))
1253 $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1254 $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1255 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1256
1257 # We have to define a clean target for each library manually, because the
1258 # libraries/*/ghc.mk files are not included when we're cleaning.
1259 ifeq "$(CLEANING)" "YES"
1260 $(foreach lib,$(PACKAGES_STAGE0),\
1261 $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot)))
1262 $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\
1263 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1264 endif
1265
1266 clean : clean_haddock_index
1267 .PHONY: clean_haddock_index
1268 clean_haddock_index:
1269 $(call removeTrees,libraries/dist-haddock)
1270
1271 clean : clean_bindistprep
1272 .PHONY: clean_bindistprep
1273 clean_bindistprep:
1274 $(call removeTrees,bindistprep/)
1275
1276 distclean : clean
1277 # Clean the files that ./validate creates.
1278 $(call removeFiles,mk/are-validating.mk)
1279
1280 # Clean the files that we ask ./configure to create.
1281 $(call removeFiles,mk/config.mk)
1282 $(call removeFiles,mk/install.mk)
1283 $(call removeFiles,mk/project.mk)
1284 $(call removeFiles,compiler/ghc.cabal)
1285 $(call removeFiles,ghc/ghc-bin.cabal)
1286 $(call removeFiles,utils/runghc/runghc.cabal)
1287 $(call removeFiles,settings)
1288 $(call removeFiles,docs/users_guide/ug-book.xml)
1289 $(call removeFiles,docs/users_guide/ug-ent.xml)
1290 $(call removeFiles,docs/index.html)
1291 $(call removeFiles,libraries/prologue.txt)
1292 $(call removeFiles,distrib/configure.ac)
1293 $(call removeFiles,ch01.html ch02.html index.html)
1294
1295 # ./configure also makes these.
1296 $(call removeFiles,mk/config.h)
1297
1298 # Internal files generated by ./configure for itself.
1299 $(call removeFiles,config.cache config.status config.log)
1300
1301 # ./configure build ghc-pwd in utils/ghc-pwd/dist-boot, so clean it up.
1302 $(call removeTrees,utils/ghc-pwd/dist-boot)
1303
1304 # The root Makefile makes .old versions of some files that configure
1305 # generates, so we clean those too.
1306 $(call removeFiles,mk/config.mk.old)
1307 $(call removeFiles,mk/project.mk.old)
1308 $(call removeFiles,compiler/ghc.cabal.old)
1309
1310 # Clean the *Config.h files generated by library configure scripts
1311 $(call removeFiles,libraries/base/include/HsBaseConfig.h)
1312 $(call removeFiles,libraries/base/include/EventConfig.h)
1313 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
1314 $(call removeFiles,libraries/process/include/HsProcessConfig.h)
1315 $(call removeFiles,libraries/unix/include/HsUnixConfig.h)
1316 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h)
1317
1318 # The library configure scripts also like creating autom4te.cache
1319 # directories, so clean them all up.
1320 $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1321
1322 # We make these when making or testing bindists
1323 $(call removeFiles,bindist-list)
1324 $(call removeTrees,bindisttest/a)
1325
1326 # Not sure why this is being cleaned here.
1327 $(call removeTrees,includes/dist-derivedconstants)
1328
1329 # Finally, clean the inplace tree.
1330 $(call removeTrees,inplace)
1331
1332 maintainer-clean : distclean
1333 $(call removeFiles,configure mk/config.h.in)
1334 $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache))
1335 $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \
1336 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1337 $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1338 $(call removeFiles,$(patsubst %, libraries/%/configure, \
1339 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1340 $(call removeFiles,libraries/base/include/HsBaseConfig.h.in)
1341 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
1342 $(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
1343 $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
1344 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in)
1345
1346 .PHONY: all_libraries
1347
1348 .PHONY: bootstrapping-files
1349 # See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting
1350 bootstrapping-files: $(includes_H_CONFIG)
1351 bootstrapping-files: $(includes_DERIVEDCONSTANTS)
1352 bootstrapping-files: $(includes_GHCCONSTANTS)
1353 bootstrapping-files: $(libffi_HEADERS)
1354
1355 .DELETE_ON_ERROR:
1356
1357 # -----------------------------------------------------------------------------
1358
1359 ifeq "$(HADDOCK_DOCS)" "YES"
1360 BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock"
1361 endif
1362 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
1363 BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla
1364 else
1365 BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared
1366 endif
1367 BINDIST_LIBRARY_FLAGS += --disable-library-prof
1368
1369 .PHONY: validate_build_xhtml
1370 validate_build_xhtml:
1371 cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup
1372 cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)"
1373 cd libraries/xhtml && ./Setup build --builddir=dist-bindist
1374 ifeq "$(HADDOCK_DOCS)" "YES"
1375 cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
1376 endif
1377 cd libraries/xhtml && ./Setup install --builddir=dist-bindist
1378 cd libraries/xhtml && ./Setup clean --builddir=dist-bindist
1379 cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
1380
1381 # -----------------------------------------------------------------------------
1382 # Numbered phase targets
1383
1384 # In phase 1, we'll be building dependency files for most things
1385 # built by the bootstrapping compiler while make is 'include'ing
1386 # makefiles. But in order to build dependency files, we'll need to
1387 # build any automatically generated .hs files, which means that
1388 # we'll need to be able to build any tools that generate .hs files
1389 # etc. But in order to do that, we need to already know the
1390 # dependencies for those tools, so we build their dependency files
1391 # here.
1392 .PHONY: phase_0_builds
1393 # hsc2hs is needed, e.g. to make the .hs files for hpc.
1394 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1395 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1396 # genprimopcode is needed to make the .hs-incl files that are in the
1397 # ghc package.
1398 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1399 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1400 # deriveConstants is used to create header files included in the
1401 # ghc package.
1402 phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell)
1403 phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm)
1404
1405 .PHONY: phase_1_builds
1406 phase_1_builds: $(PACKAGE_DATA_MKS)
1407