Move the libraries bindist generation code into libraries/Makefile
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # hc-file-bundle
41 # Builds an HC-file bundle, for bootstrapping
42 #
43 # clean, distclean, maintainer-clean
44 # Increasing levels of cleanliness
45 #
46 ############################################################################
47
48 TOP=.
49 include $(TOP)/mk/boilerplate.mk
50
51 #
52 # Order is important! It's e.g. necessary to descend into include/
53 # before the rest to have a config.h, etc.
54 #
55 # If we're booting from .hc files, swap the order
56 # we descend into subdirs - to boot utils must be before driver.
57 #
58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
59
60 # We can't 'make boot' in libraries until stage1 is built
61 ifeq "$(BootingFromHc)" "YES"
62 SUBDIRS_NOLIB = includes rts compat compiler docs utils driver
63 else
64 SUBDIRS_NOLIB = includes compat utils driver docs compiler rts
65 endif
66
67 SUBDIRS = $(SUBDIRS_NOLIB) libraries
68
69 # Sanity check that all the core libraries are in the tree, to catch
70 # failure to run darcs-all.
71 check-packages :
72 @for d in `cat libraries/core-packages`; do \
73 if test ! -d libraries/$$d; then \
74 echo "Looks like you're missing libraries/$$d,"; \
75 echo "maybe you haven't done './darcs-all get'?"; \
76 exit 1; \
77 fi \
78 done
79 @if test ! -e libraries/base/configure; then \
80 echo "Looks like you're missing base's configure script."; \
81 echo "Did you run 'sh boot' at the top level?"; \
82 exit 1; \
83 fi
84
85 stage1 : check-packages
86 $(MAKE) -C utils/mkdependC boot
87 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
88 for i in $(SUBDIRS_NOLIB); do \
89 echo "------------------------------------------------------------------------"; \
90 echo "== $(MAKE) boot $(MFLAGS);"; \
91 echo " in $(shell pwd)/$$i"; \
92 echo "------------------------------------------------------------------------"; \
93 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
94 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
95 done; \
96 for i in $(SUBDIRS_NOLIB); do \
97 echo "------------------------------------------------------------------------"; \
98 echo "== $(MAKE) all $(MFLAGS);"; \
99 echo " in $(shell pwd)/$$i"; \
100 echo "------------------------------------------------------------------------"; \
101 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
102 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
103 done
104 $(MAKE) -C libraries boot
105 $(MAKE) -C libraries all
106
107 stage2 : check-packages
108 $(MAKE) -C compiler boot stage=2
109 $(MAKE) -C compiler stage=2
110
111 stage3 : check-packages
112 $(MAKE) -C compiler boot stage=3
113 $(MAKE) -C compiler stage=3
114
115 bootstrap : bootstrap2
116
117 bootstrap2 : stage1
118 $(MAKE) stage2
119
120 bootstrap3 : bootstrap2
121 $(MAKE) stage3
122
123 all :: bootstrap
124
125 # -----------------------------------------------------------------------------
126 # Installing
127
128 # We want to install the stage 2 bootstrapped compiler by default, but we let
129 # the user override this by saying 'make install stage=1', for example.
130 ifeq "$(stage)" ""
131 INSTALL_STAGE = stage=2
132 else
133 INSTALL_STAGE =
134 endif
135
136 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
137 install :: check-packages
138 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
139 for i in $(SUBDIRS); do \
140 echo "------------------------------------------------------------------------"; \
141 echo "== $(MAKE) $@ $(MFLAGS);"; \
142 echo " in $(shell pwd)/$$i"; \
143 echo "------------------------------------------------------------------------"; \
144 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
145 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
146 done
147
148 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
149 # These files need to be in the InstallShield
150 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
151 # in the top-level directory of the distribution
152 INSTALL_DATAS += ANNOUNCE LICENSE README
153 endif
154
155 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
156 # and the perl interpreter and dll into the GHC prefix directory.
157 # Gcc and Perl source locations derived from configuration data.
158 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
159 ifneq "$(WhatGccIsCalled)" ""
160 install ::
161 -mkdir $(prefix)/gcc-lib
162 -mkdir $(prefix)/include
163 -mkdir $(prefix)/include/mingw
164 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
165 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
166 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
167 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
168 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
169 -cp $(GccDir)gcc.exe $(prefix)
170 -cp $(GccDir)as.exe $(prefix)/gcc-lib
171 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
172 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
173 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
174 -cp $(GhcDir)../perl.exe $(prefix)
175 -cp $(GhcDir)../perl56.dll $(prefix)
176 endif
177 endif
178
179 install-docs ::
180 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
181 for i in $(SUBDIRS); do \
182 echo "------------------------------------------------------------------------"; \
183 echo "== $(MAKE) $@ $(MFLAGS);"; \
184 echo " in $(shell pwd)/$$i"; \
185 echo "------------------------------------------------------------------------"; \
186 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
187 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
188 done
189
190 # -----------------------------------------------------------------------------
191 # Making a binary distribution
192 #
193 # `dist' `binary-dist'
194 # Create a distribution tar file for this program. The tar file
195 # should be set up so that the file names in the tar file start with
196 # a subdirectory name which is the name of the package it is a
197 # distribution for. This name can include the version number.
198 #
199 # For example, the distribution tar file of GCC version 1.40 unpacks
200 # into a subdirectory named `gcc-1.40'.
201 #
202 # The easiest way to do this is to create a subdirectory
203 # appropriately named, use ln or cp to install the proper files in
204 # it, and then tar that subdirectory.
205 #
206 # The dist target should explicitly depend on all non-source files
207 # that are in the distribution, to make sure they are up to date in
208 # the distribution. See Making Releases.
209 #
210 # binary-dist is a GHC addition for binary distributions
211 #
212
213 ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
214 BinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs-ghc
215 else
216 BinDistShScripts =
217 endif
218
219 BinDistPrlScripts = ghcprof
220 BinDistLibPrlScripts = ghc-asm ghc-split
221 BinDistBins = hp2ps runghc
222 BinDistLinks = ghc ghci ghc-pkg
223 BinDistLibSplicedFiles = package.conf
224 BinDistDirs = includes compiler docs driver rts utils
225
226 BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
227
228 BIN_DIST_TOP= distrib/Makefile \
229 distrib/configure-bin.ac \
230 distrib/INSTALL \
231 distrib/README \
232 ANNOUNCE \
233 LICENSE \
234 utils/mkdirhier/mkdirhier \
235 install-sh \
236 config.guess \
237 config.sub \
238 aclocal.m4
239
240 ifeq "$(darwin_TARGET_OS)" "1"
241 BIN_DIST_TOP+=mk/fix_install_names.sh
242 endif
243
244 .PHONY: binary-dist-pre% binary-dist binary-pack
245
246 BINARY_DIST_PRE_RULES=$(foreach d,$(BinDistDirs),binary-dist-pre-$d)
247
248 binary-dist:: binary-dist-pre $(BINARY_DIST_PRE_RULES)
249
250 binary-dist-pre::
251 ifeq "$(BIN_DIST)" ""
252 @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in mk/build.mk"
253 @false
254 endif
255 -rm -rf $(BIN_DIST_DIR)
256 -$(RM) $(BIN_DIST_DIR).tar.gz
257 $(MKDIRHIER) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)
258 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
259 $(MKDIRHIER) $(BIN_DIST_DIR)/share
260
261 $(BINARY_DIST_PRE_RULES): binary-dist-pre-%:
262 $(MAKE) -C $* $(MFLAGS) $(INSTALL_STAGE) install \
263 prefix=$(BIN_DIST_DIR) \
264 exec_prefix=$(BIN_DIST_DIR) \
265 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
266 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
267 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
268 datadir=$(BIN_DIST_DIR)/share
269
270 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
271
272 binary-dist::
273 @for i in $(BIN_DIST_TOP); do \
274 if test -f "$$i"; then \
275 echo cp $$i $(BIN_DIST_DIR); \
276 cp $$i $(BIN_DIST_DIR); \
277 fi; \
278 done;
279 @echo "Configuring the Makefile for this project..."
280 echo > $(VARFILE)
281 echo "package = ghc" >> $(VARFILE)
282 echo "version = $(ProjectVersion)" >> $(VARFILE)
283 echo "PACKAGE_SH_SCRIPTS = $(BinDistShScripts)" >> $(VARFILE)
284 echo "PACKAGE_PRL_SCRIPTS = $(BinDistPrlScripts)" >> $(VARFILE)
285 echo "PACKAGE_LIB_PRL_SCRIPTS = $(BinDistLibPrlScripts)" >> $(VARFILE)
286 echo "PACKAGE_LIB_SPLICED_FILES = $(BinDistLibSplicedFiles)" >> $(VARFILE)
287 echo "PACKAGE_BINS = $(BinDistBins)" >> $(VARFILE)
288 echo "PACKAGE_OPT_BINS = $(BinDistOptBins)" >> $(VARFILE)
289 echo "PACKAGE_LINKS = $(BinDistLinks)" >> $(VARFILE)
290 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
291 @echo "Generating a shippable configure script.."
292 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
293 ( cd $(BIN_DIST_DIR); autoconf )
294 #
295 # binary dist'ing the documentation.
296 # The default documentation to build/install is given below; overrideable
297 # via build.mk or the 'make' command-line.
298
299 ifndef BINDIST_DOC_WAYS
300
301 BINDIST_DOC_WAYS = $(XMLDocWays)
302
303 # ifneq "$(XSLTPROC)" ""
304 # BINDIST_DOC_WAYS = html
305 # ifneq "$(FOP)" ""
306 # BINDIST_DOC_WAYS += ps pdf
307 # else
308 # ifneq "$(PDFXMLTEX)" ""
309 # BINDIST_DOC_WAYS += pdf
310 # endif
311 # ifneq "$(XMLTEX)" ""
312 # ifneq "$(DVIPS)" ""
313 # BINDIST_DOC_WAYS += ps
314 # endif # DVIPS
315 # endif # XMLTEX
316 # endif # FOP
317 # endif # XSLTPROC
318
319 endif # BINDIST_DOC_WAYS
320
321 ifneq "$(DIR_DOCBOOK_XSL)" ""
322 .PHONY: binary-dist-doc-%
323
324 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
325
326 binary-dist :: $(BINARY_DIST_DOC_RULES)
327
328 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
329 $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
330 $(MAKE) -C $* $(MFLAGS) install-docs \
331 MAKING_BIN_DIST=1
332 XMLDocWays="$(BINDIST_DOC_WAYS)" \
333 prefix=$(BIN_DIST_DIR) \
334 exec_prefix=$(BIN_DIST_DIR) \
335 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
336 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
337 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
338 datadir=$(BIN_DIST_DIR)/share
339 endif
340
341 # Rename scripts to $i.prl and $i.sh where necessary.
342 # ToDo: do this in a cleaner way...
343
344 ifneq "$(BinDistPrlScripts)" ""
345 binary-dist::
346 @for i in $(BinDistPrlScripts); do \
347 echo "Renaming $$i to $$i.prl"; \
348 $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.prl; \
349 done
350 endif
351
352 ifneq "$(BinDistLibPrlScripts)" ""
353 binary-dist::
354 @for i in $(BinDistLibPrlScripts); do \
355 echo "Renaming $$i to $$i.prl"; \
356 $(MV) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)/$$i.prl; \
357 done
358 endif
359
360 ifneq "$(BinDistShScripts)" ""
361 binary-dist::
362 @for i in $(BinDistShScripts); do \
363 if test -x $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i ; then \
364 echo "Renaming $$i to $$i.sh"; \
365 $(MV) $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_DIR)/bin/$(TARGETPLATFORM)/$$i.sh; \
366 fi \
367 done
368 endif
369
370 .PHONY: binary-dist-doc-%
371
372 binary-dist::
373 $(MAKE) -C libraries binary-dist
374
375 # Jiggle the files around to make a valid Windows distribution if necessary
376 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
377 binary-dist :: fiddle-binary-dist
378 endif
379
380 .PHONY: fiddle-binary-dist
381 fiddle-binary-dist:
382 cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
383 # Tar up the distribution and build a manifest
384 binary-dist :: tar-binary-dist
385
386 .PHONY: tar-binary-dist
387 tar-binary-dist:
388 ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
389 ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
390
391 # Upload the distribution and documentation
392 ifneq "$(PublishLocation)" ""
393 binary-dist :: publish-binary-dist
394 endif
395
396 .PHONY: publish-binary-dist
397 publish-binary-dist :
398 @for i in 0 1 2 3 4 5 6 7 8 9; do \
399 echo "Try $$i: $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation)"; \
400 if $(PublishCp) $(BIN_DIST_TARBALL) $(PublishLocation); then break; fi\
401 done
402 $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
403
404
405 binary-dist::
406 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
407
408 # -----------------------------------------------------------------------------
409 # Building source distributions
410 #
411 # Do it like this:
412 #
413 # $ make
414 # $ make dist
415 #
416 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
417 #
418
419 .PHONY: dist
420
421 #
422 # Directory in which we're going to build the src dist
423 #
424 SRC_DIST_NAME=ghc-$(ProjectVersion)
425 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
426
427 #
428 # Files to include in source distributions
429 #
430 SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS))
431 SRC_DIST_FILES += \
432 configure.ac config.guess config.sub configure \
433 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
434 ghc.spec.in VERSION
435
436 # -----------------------------------------------------------------------------
437 # Source distributions
438
439 # A source dist is built from a complete build tree, because we
440 # require some extra files not contained in a darcs checkout: the
441 # output from Happy and Alex, for example.
442 #
443 # The steps performed by 'make dist' are as follows:
444 # - create a complete link-tree of the current build tree in /tmp
445 # - run 'make distclean' on that tree
446 # - remove a bunch of other files that we know shouldn't be in the dist
447 # - tar up first the extralibs package, then the main source package
448
449 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
450
451 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
452 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
453
454 VERSION :
455 echo $(ProjectVersion) >VERSION
456
457 dist :: VERSION
458
459 dist ::
460 $(RM) -rf $(SRC_DIST_DIR)
461 $(RM) $(SRC_DIST_NAME).tar.gz
462 mkdir $(SRC_DIST_DIR)
463 ( cd $(SRC_DIST_DIR) \
464 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
465 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
466 && $(MAKE) distclean \
467 && $(RM) -rf compiler/stage[123] mk/build.mk \
468 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
469 )
470 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
471 $(RM) -rf $(EXTRA_LIBS)
472 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
473
474 # Upload the distribution(s)
475 # Retrying is to work around buggy firewalls that corrupt large file transfers
476 # over SSH.
477 ifneq "$(PublishLocation)" ""
478 dist ::
479 @for i in 0 1 2 3 4 5 6 7 8 9; do \
480 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)"; \
481 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation); then break; fi\
482 done
483 @for i in 0 1 2 3 4 5 6 7 8 9; do \
484 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)"; \
485 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation); then break; fi\
486 done
487 endif
488
489 # -----------------------------------------------------------------------------
490 # HC file bundles
491
492 hc-file-bundle :
493 $(RM) -r ghc-$(ProjectVersion)
494 $(LN_S) . ghc-$(ProjectVersion)
495 $(FIND) ghc-$(ProjectVersion)/compiler \
496 ghc-$(ProjectVersion)/utils \
497 ghc-$(ProjectVersion)/compat \
498 ghc-$(ProjectVersion)/libraries -follow \
499 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
500 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
501 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
502 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
503 fi; \
504 done;
505 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
506 if test "x$$f" != "x"; then \
507 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
508 fi; \
509 done;
510 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
511 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
512 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
513 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
514 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
515 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
516
517 # -----------------------------------------------------------------------------
518 # Cleaning
519
520 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
521
522 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
523 ghc.spec docs/users_guide/ug-book.xml
524
525 # don't clean config.mk: it's needed when cleaning stuff later on
526 LATE_DIST_CLEAN_FILES += mk/config.mk
527
528 # VERSION is shipped in a source dist
529 MAINTAINER_CLEAN_FILES += VERSION
530
531 extraclean::
532 $(RM) -rf autom4te.cache
533
534 # -----------------------------------------------------------------------------
535
536 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
537 NO_BOOT_TARGET=YES
538 NO_ALL_TARGET=YES
539 NO_INSTALL_TARGET=YES
540
541 include $(TOP)/mk/target.mk
542
543 # -----------------------------------------------------------------------------
544