06c12bfb442d736426f66306a437a08605eeb160
[ghc.git] / mk / config.mk.in
1 # -*-makefile-*-
2 # @configure_input@
3 #
4 ################################################################################
5 #
6 # config.mk.in
7 #
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
10 # configure script.
11 #
12 # DO NOT EDIT THIS FILE!
13 #
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # If you edit config.mk your changes will be spammed.
16 #
17 # - Settings in this file may be overriden by giving replacement
18 # definitions in build.mk. See build.mk.sample for a good
19 # starting point for a build.mk file.
20 #
21 # If you don't have a build.mk file then you get defaults for everything.
22 # The defaults should provide a reasonable vanilla build.
23
24 # TOP: the top of the fptools hierarchy, absolute path.
25 # On Windows this is a c:/foo/bar style path.
26 TOP = @hardtop@
27
28 include $(TOP)/mk/project.mk
29
30 # By default, be verbose
31 V = 1
32
33 ################################################################################
34 #
35 # Global configuration options
36 #
37 ################################################################################
38
39 NO_INCLUDE_DEPS = NO
40 NO_INCLUDE_PKGDATA = NO
41
42 ################################################################################
43 #
44 # Variables that control how the compiler itself is built
45 #
46 ################################################################################
47
48 # The compiler used to build GHC is $(GHC). To change the actual compiler
49 # used, re-configure with --with-ghc=<path-to-ghc>.
50
51 # Extra option flags to pass to the compiler that compiles the compiler
52 # (Ones that are essential are wired into compiler/Makefile)
53 # Typical options to use here:
54 #
55 # -DDEBUG include debugging code and assertions (will make the
56 # compiler slower and produce debugging output, but useful
57 # for development)
58 #
59 # -dcore-lint check the types after every pass of the compiler;
60 # a pretty strong internal check of the compiler being
61 # used to compile GHC. Useful when bootstrapping.
62 GhcHcOpts=-Rghc-timing
63
64 # Extra options added to specific stages of the compiler bootstrap.
65 # These are placed later on the command line, and may therefore
66 # override options from $(GhcHcOpts).
67 #
68 # See Note [Stage number in build variables].
69 GhcStage1HcOpts=
70 GhcStage2HcOpts=-O2
71 GhcStage3HcOpts=-O2
72
73 # Disable -O2 optimization. Otherwise amount of generated C code
74 # makes things very slow to compile (~5 minutes on core-i7 for 'compiler/hsSyn/HsExpr.lhs')
75 # and sometimes not compile at all (powerpc64 overflows something
76 # on 'compiler/hsSyn/HsExpr.lhs').
77 ifeq "$(GhcUnregisterised)" "YES"
78 GhcStage1HcOpts=
79 GhcStage2HcOpts=
80 GhcStage3HcOpts=
81 endif
82
83 # Note [Stage number in build variables].
84 #
85 # There are (unfortunately) two different naming schemes for build variables
86 # specific to a certain stage.
87 #
88 # * GhcStage1HcOpts/GhcStage2HcOpts/GhcStage3HcOpts:
89 #
90 # The stage number refers to the compiler stage being built (ghc library
91 # and executable).
92 #
93 # * SRC_HC_OPTS_STAGE$4 and SRC_HC_WARNING_OPTS_STAGE$4:
94 #
95 # The stage number refers to the compiler stage the options are passed to.
96
97 GhcDebugged=NO
98 GhcDynamic=NO
99
100 # GhcProfiled=YES means compile a profiled stage-2 compiler
101 GhcProfiled=NO
102
103 ifeq "$(findstring $(TargetOS_CPP),linux freebsd dragonfly openbsd netbsd solaris2 kfreebsdgnu haiku linux-android)" ""
104 TargetElf = NO
105 else
106 TargetElf = YES
107 endif
108
109 # Some platforms don't support shared libraries
110 NoSharedLibsPlatformList = \
111 powerpc-ibm-aix \
112 x86_64-unknown-mingw32 \
113 i386-unknown-mingw32
114
115 ifeq "$(SOLARIS_BROKEN_SHLD)" "YES"
116 NoSharedLibsPlatformList += i386-unknown-solaris2
117 endif
118
119 PlatformSupportsSharedLibs = $(if $(filter $(TARGETPLATFORM),\
120 $(NoSharedLibsPlatformList)),NO,YES)
121
122 # DYNAMIC_BY_DEFAULT says whether this compiler will default to
123 # building dynamic executables, i.e. -dynamic is on. We do this for
124 # most platforms because it lets us use the system dynamic linker
125 # instead of our own linker for GHCi.
126 #
127 # Currently this isn't possible on Windows, and we have not yet enabled
128 # it on i386 while we consider the performance implications.
129 #
130 ifeq "$(TargetOS_CPP)" "mingw32"
131 DYNAMIC_BY_DEFAULT = NO
132 else ifeq "$(TargetArch_CPP)" "i386"
133 DYNAMIC_BY_DEFAULT = NO
134 else
135 DYNAMIC_BY_DEFAULT = YES
136 endif
137
138 # For now, we unconditionally disable dynamic-by-default, as the
139 # cabal-install's that are in the wild don't handle it properly.
140 DYNAMIC_BY_DEFAULT = NO
141
142 # If building both v and dyn ways, then use -dynamic-too to build them.
143 # This makes the build faster.
144 DYNAMIC_TOO = YES
145
146 # Use the dynamic way when building programs in the GHC tree. In
147 # particular, this means that GHCi will use DLLs rather than loading
148 # object files directly.
149 ifeq "$(TargetOS_CPP)" "mingw32"
150 # This doesn't work on Windows yet
151 DYNAMIC_GHC_PROGRAMS = NO
152 DYNAMIC_TOO=NO
153 else ifeq "$(PlatformSupportsSharedLibs)" "NO"
154 DYNAMIC_GHC_PROGRAMS = NO
155 else
156 DYNAMIC_GHC_PROGRAMS = YES
157 endif
158
159 # Build a compiler that will build *unregisterised* libraries and
160 # binaries by default. Unregisterised code is supposed to compile and
161 # run without any support for architecture-specific assembly mangling,
162 # register assignment or tail-calls, and is therefore a good way to get
163 # started when porting GHC to new architectures.
164 #
165 # NOTE: the stage1 compiler will be a registerised binary (assuming
166 # the compiler you build with is generating registerised binaries), but
167 # the stage2 compiler will be an unregisterised binary.
168 #
169 GhcUnregisterised=@Unregisterised@
170
171 # Build a compiler with a native code generator backend
172 # (as well as a C backend)
173 #
174 # Target platforms supported:
175 # i386, powerpc, powerpc64, sparc
176 # IOS is not supported
177 ArchSupportsNCG=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc powerpc64 powerpc64le sparc)))
178 OsSupportsNCG=$(strip $(patsubst $(TargetOS_CPP), YES, $(patsubst ios,,$(TargetOS_CPP))))
179
180 GhcWithNativeCodeGen := $(strip\
181 $(if $(filter YESYESNO,\
182 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
183
184 HaveLibDL = @HaveLibDL@
185
186 # ArchSupportsSMP should be set iff there is support for that arch in
187 # includes/stg/SMP.h
188 ifeq "$(TargetArch_CPP)" "arm"
189 # We don't support load/store barriers pre-ARMv7. See #10433.
190 ArchSupportsSMP=$(if $(filter $(ARM_ISA),ARMv5 ARMv6),NO,YES)
191 else
192 ArchSupportsSMP=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 sparc powerpc powerpc64 powerpc64le aarch64)))
193 endif
194
195 # The THREADED_RTS requites `BaseReg` to be in a register and the
196 # `GhcUnregisterised` mode doesn't allow that.
197 GhcWithSMP := $(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
198
199 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
200 # has support for this OS/ARCH combination.
201
202 OsSupportsGHCi=$(strip $(patsubst $(TargetOS_CPP), YES, $(findstring $(TargetOS_CPP), mingw32 linux solaris2 freebsd dragonfly netbsd openbsd darwin kfreebsdgnu)))
203 ArchSupportsGHCi=$(strip $(patsubst $(TargetArch_CPP), YES, $(findstring $(TargetArch_CPP), i386 x86_64 powerpc powerpc64 powerpc64le sparc sparc64 arm aarch64)))
204
205 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
206 GhcWithInterpreter=YES
207 else
208 GhcWithInterpreter=$(if $(findstring YES,$(DYNAMIC_GHC_PROGRAMS)),YES,NO)
209 endif
210
211 # GhcEnableTablesNextToCode tells us whether the target architecture
212 # supports placing info tables directly before the entry code
213 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
214 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
215 # code or not, which may be decided by options to the compiler later.
216 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X powerpc64leX)" ""
217 GhcEnableTablesNextToCode=NO
218 else
219 GhcEnableTablesNextToCode=YES
220 endif
221
222 # Whether to use libffi for adjustors (foreign import "wrapper") or
223 # not. If we have built-in support (rts/Adjustor.c) then we use that,
224 # otherwise we fall back on libffi, which is slightly slower.
225 ArchHasAdjustorSupport = $(if $(findstring $(TargetArch_CPP),i386 x86_64),YES,NO)
226 ifeq "$(ArchHasAdjustorSupport)" "YES"
227 UseLibFFIForAdjustors=NO
228 else
229 UseLibFFIForAdjustors=YES
230 endif
231
232 # On Windows we normally want to make a relocatable bindist, to we
233 # ignore flags like libdir
234 ifeq "$(Windows_Host)" "YES"
235 RelocatableBuild = YES
236 else
237 RelocatableBuild = NO
238 endif
239
240 # needs to be after $(RelocatableBuild) is set above
241 include $(TOP)/mk/install.mk
242
243 # When building bindists we set this to yes so that the binaries are as
244 # portable as possible.
245 BeConservative = NO
246
247 ExtraMakefileSanityChecks = NO
248
249 #------------------------------------------------------------------------------
250 # Options for Libraries
251
252 # Which directory (in libraries/) contains the integer library?
253 INTEGER_LIBRARY=integer-gmp
254
255 # We build the libraries at least the "vanilla" way (way "v")
256 # Technically we don't need the v way if DYNAMIC_GHC_PROGRAMS is YES,
257 # but with -dynamic-too it's cheap, and makes life easier.
258 GhcLibWays = v
259
260 # In addition to the normal sequential way, the default is to also build
261 # profiled prelude libraries
262 # $(if $(filter ...)) allows controlling this expression from build.mk.
263 GhcLibWays += $(if $(filter $(BUILD_PROF_LIBS),NO),,p)
264
265 # Backward compatibility: although it would be cleaner to test for
266 # PlatformSupportsSharedLibs, or perhaps a new variable BUILD_SHARED_LIBS,
267 # some users currently expect that DYNAMIC_GHC_PROGRAMS=NO in build.mk implies
268 # that dyn is not added to GhcLibWays.
269 GhcLibWays += $(if $(filter $(DYNAMIC_GHC_PROGRAMS),NO),,dyn)
270
271 # Handy way to test whether we're building shared libs or not.
272 BuildSharedLibs=$(strip $(if $(findstring dyn,$(GhcLibWays)),YES,NO))
273
274 # In addition, the RTS is built in some further variations. Ways that
275 # make sense here:
276 #
277 # thr : threaded
278 # thr_p : threaded + profiled + eventlog
279 # debug : debugging + eventlog
280 # thr_debug : debugging + threaded, + eventlog
281 # l : eventlog
282 # p : profiled + eventlog
283 # thr_l : threaded + eventlog
284 #
285 # Note how there are a few cases which are handled specially (in packageHsLibs)
286 # to reduce the number of distinct ways,
287 #
288 # debug implies eventlog
289 # profiled implies eventlog
290 #
291 # This means, for instance, that there is no debug_l way.
292 #
293 GhcRTSWays=l
294
295 # Usually want the debug version
296 GhcRTSWays += debug
297
298 # We always have the threaded versions, but note that SMP support may be disabled
299 # (see GhcWithSMP).
300 GhcRTSWays += thr thr_debug thr_l
301 GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),thr_p,)
302 GhcRTSWays += $(if $(findstring dyn, $(GhcLibWays)),dyn debug_dyn thr_dyn thr_debug_dyn l_dyn thr_l_dyn,)
303
304 # We can only build GHCi threaded if we have a threaded RTS:
305 GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
306
307 # Option flags to pass to GHC when it's compiling modules in
308 # fptools/libraries. Typically these are things like -O or
309 # -dcore-lint or -H32m. The ones that are *essential* are wired into
310 # the build system.
311 #
312 # -O(2) is pretty desirable, otherwise no inlining of prelude
313 # things (incl "+") happens when compiling with this compiler
314
315 GhcLibHcOpts=-O2
316
317 # Strip local symbols from libraries? This can make the libraries smaller,
318 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
319 #
320 StripLibraries=NO
321
322 # ----------------------------------------------------------------------------
323 # Object-file splitting
324 #
325 # Set SplitObjs=YES or NO in your build.mk
326 #
327 # Don't use -split-objs in in GhcLibHcOpts, because the build
328 # system needs to do other special magic if you are
329 # doing object-file splitting
330
331 ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
332 OsSupportsSplitObjs=$(strip $(if $(filter $(TargetOS_CPP),mingw32 linux darwin solaris2 freebsd dragonfly netbsd openbsd),YES,NO))
333 SplitObjsBroken = @SplitObjsBroken@
334
335 SupportsSplitObjs := $(strip \
336 $(if $(and $(filter YES,$(ArchSupportsSplitObjs)),\
337 $(filter YES,$(OsSupportsSplitObjs)),\
338 $(filter NO,$(SplitObjsBroken)),\
339 $(filter NO,$(GhcUnregisterised))),\
340 YES,NO))
341
342 # By default, enable SplitObjs for the libraries if this build supports it
343 SplitObjs=$(SupportsSplitObjs)
344
345 # ----------------------------------------------------------------------------
346 # Section splitting
347 #
348 # Similar to -ffunction-sections -fdata-sections in GCC. Provides space saving
349 # like SplitObjs, but doesn't require post-processing and splitting of object
350 # files.
351 #
352 # Set SplitSections=YES in your build.mk to enable.
353
354 SplitSections=NO
355
356 # ----------------------------------------------------------------------------
357
358 # There are a number of things which technically depend on GHC (e.g. if
359 # ghc changes then Haskell files may be compiled differently, or Cabal
360 # packages may be configured differently). By default we therefore
361 # have dependencies on the compiler executable.
362
363 # However, in practice, having a dependency on GHC is just a pain: We
364 # normally don't want to spend time recompiling other things while
365 # we're working on the compiler, and even if we did, GHC will normally
366 # decide compilation isn't needed anyway. So by setting LAX_DEPENDENCIES
367 # to YES you can turn these dependencies into order-only dependencies,
368 # i.e. GHC must exist, but if it's newer than other targets then
369 # rebuilding is not necessary.
370
371 LAX_DEPENDENCIES = NO
372
373 # ----------------------------------------------------------------------------
374 # Options for GHC's RTS
375
376 # Build an optimised RTS. Remember that we need to turn on
377 # optimisation both for C code (-optc-O2) and .cmm code (-O2). For
378 # the debugging RTS flavour, rts/ghc.mk overrides these to turn off
379 # optimisation.
380 GhcRtsHcOpts=-O2
381 GhcRtsCcOpts=-O2 -fomit-frame-pointer -g
382
383 # Configuration for libffi
384 UseSystemLibFFI=@UseSystemLibFFI@
385 # Flags to go into package.conf for rts
386 FFILibDir=@FFILibDir@
387 FFIIncludeDir=@FFIIncludeDir@
388
389 # GHC needs arch-specific tweak at least in
390 # rts/Libdw.c:set_initial_registers()
391 GhcRtsWithLibdw=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64),@UseLibdw@,NO))
392
393 ################################################################################
394 #
395 # Paths (see paths.mk)
396 #
397 ################################################################################
398
399 BIN_DIST_NAME = ghc-$(ProjectVersion)
400 BIN_DIST_PREP_DIR = bindistprep/$(BIN_DIST_NAME)
401 BIN_DIST_PREP_TAR = bindistprep/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
402 BIN_DIST_PREP_TAR_COMP = $(BIN_DIST_PREP_TAR).$(TAR_COMP_EXT)
403 BIN_DIST_TAR_COMP = $(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.$(TAR_COMP_EXT)
404
405 # -----------------------------------------------------------------------------
406 # Utilities programs: flags
407
408 # If you want to give any standard flags to pretty much any utility
409 # (see utils.mk for a complete list), by adding a line here
410 #
411 # SRC_P_OPTS += ...
412 #
413 # where P is the utility. For example, to add -O to all Haskell
414 # compilations,
415 #
416 # SRC_HC_OPTS += -O
417
418
419 # SRC_HC_OPTS includes flags to be added to *every* Haskell
420 # compilation. Setting SRC_HC_OPTS is a good way to set the default
421 # optimisation level (-O) and heap size (-H<size>).
422 #
423 # SRC_HC_OPTS is *not* for adding flags that are required to make your
424 # build work. Examples:
425 #
426 # - instead of using -pgmc/-pgma-/-pgml, use the --with-gcc option to configure
427 #
428 # - if you need -optc, -opta, or -optl flags, the CONF_CC_* and CONF_LD_*
429 # variables are more appropriate (set via configure)
430 #
431 # Note that SRC_HC_OPTS are added to every Haskell compilation,
432 # including when using the bootstrapping compiler (stage 0), So don't
433 # put options here that are only supported by very recent GHCs.
434 #
435 SRC_HC_OPTS += -H32m -O
436
437
438 # See Note [Stage number in build variables].
439 SRC_HC_OPTS_STAGE0 =
440 SRC_HC_OPTS_STAGE1 =
441 SRC_HC_OPTS_STAGE2 =
442
443 # Warning suppression flags. See mk/warnings.mk.
444 SRC_CC_WARNING_OPTS =
445 SRC_HC_WARNING_OPTS =
446
447 # See Note [Stage number in build variables].
448 SRC_HC_WARNING_OPTS_STAGE0 =
449 SRC_HC_WARNING_OPTS_STAGE1 =
450 SRC_HC_WARNING_OPTS_STAGE2 =
451
452 # -----------------------------------------------------------------------------
453 # Names of programs in the GHC tree
454
455 MKDIRHIER = $(INPLACE_BIN)/mkdirhier
456
457 GENERATED_FILE = chmod a-w
458 EXECUTABLE_FILE = chmod +x
459
460 #-----------------------------------------------------------------------------
461 # Installed GHC
462
463 # $(GHC) points to installed version of the compiler.
464 #
465 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
466 # (because the version numbers have to be calculated).
467
468 GHC := @WithGhc@
469 # If we have a make dependency on c:/ghc/ghc, and the file is actually
470 # called c:/ghc/ghc.exe, then make will think that ghc doesn't exist
471 # and that it doesn't know how to create it.
472 ifneq "$(wildcard $(GHC).exe)" ""
473 GHC := $(GHC).exe
474 endif
475
476 GHC_STAGE0 = $(GHC)
477 GHC_STAGE1 = $(ghc-stage1_INPLACE)
478 GHC_STAGE2 = $(ghc-stage2_INPLACE)
479 GHC_STAGE3 = $(ghc-stage3_INPLACE)
480
481 BOOTSTRAPPING_CONF = libraries/bootstrapping.conf
482
483 INPLACE_PACKAGE_CONF = $(INPLACE_LIB)/package.conf.d
484
485 GhcVersion = @GhcVersion@
486 GhcPatchLevel = @GhcPatchLevel@
487 GhcMajVersion = @GhcMajVersion@
488 GhcMinVersion = @GhcMinVersion@
489
490 # Canonicalised ghc version number, used for easy (integer) version
491 # comparisons. We must expand $(GhcMinVersion) to two digits by
492 # adding a leading zero if necessary:
493 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
494 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
495 else
496 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
497 endif
498
499 GHC_PACKAGE_DB_FLAG = @GHC_PACKAGE_DB_FLAG@
500
501 SUPPORTS_THIS_UNIT_ID = @SUPPORTS_THIS_UNIT_ID@
502
503 #-----------------------------------------------------------------------------
504 # C compiler
505 #
506 # NB. Don't override $(CC) using build.mk, re-configure using
507 # the flag CC=<blah> instead. The reason is that the configure script
508 # needs to know which gcc you're using in order to perform its tests.
509
510 GccVersion = @GccVersion@
511 ifeq "$(phase)" "0"
512 CrossCompilePrefix =
513 else
514 CrossCompilePrefix = @CrossCompilePrefix@
515 endif
516 # TargetPlatformFull retains the string passed to configure so we have it in
517 # the necessary format to pass to libffi's configure.
518 TargetPlatformFull = @TargetPlatformFull@
519 GccLT34 = @GccLT34@
520 GccLT44 = @GccLT44@
521 GccLT46 = @GccLT46@
522 GccIsClang = @GccIsClang@
523
524 CC = @CC@
525 CC_STAGE0 = @CC_STAGE0@
526 CC_STAGE1 = $(CC)
527 CC_STAGE2 = $(CC)
528 CC_STAGE3 = $(CC)
529
530 AS = @CC@
531 AS_STAGE0 = @CC_STAGE0@
532 AS_STAGE1 = $(AS)
533 AS_STAGE2 = $(AS)
534 AS_STAGE3 = $(AS)
535
536 # why no LD=@LD@ ?
537 LD_STAGE0 = @LD_STAGE0@
538 LD_STAGE1 = $(LD)
539 LD_STAGE2 = $(LD)
540 LD_STAGE3 = $(LD)
541
542 # Cross-compiling options
543 # See Note [CrossCompiling vs Stage1Only]
544 CrossCompiling = @CrossCompiling@
545
546 # Change this to YES if you're building a cross-compiler and don't
547 # want to build stage 2.
548 # See Note [CrossCompiling vs Stage1Only]
549 # See Note [Stage1Only vs stage=1]
550 Stage1Only = NO
551
552 # Install stage 2 by default, or stage 1 in the cross compiler
553 # case. Can be changed to 3
554 INSTALL_GHC_STAGE= $(if $(filter YES,$(Stage1Only)),1,2)
555
556 # Note [CrossCompiling vs Stage1Only]
557 #
558 # There are 4 possible settings:
559 #
560 # 1 CrossCompiling=NO Stage1Only=NO
561 # The default.
562 #
563 # 2 CrossCompiling=NO Stage1Only=YES
564 # Don't build ghc-stage2. See Note [Stage1Only vs stage=1].
565 #
566 # 3 CrossCompiling=YES Stage1Only=YES
567 # Building a cross-compiler (ghc-stage1). See [1] and
568 # Note [Stage1Only vs stage=1].
569 #
570 # 4 CrossCompiling=YES Stage1Only=NO
571 # Cross-compiling GHC itself. See [1].
572 #
573 # [1] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
574
575 # Note [Stage1Only vs stage=1]
576 #
577 # Stage1Only=YES means:
578 # - don't build ghc-stage2 (the executable)
579 # - don't build utils that rely on ghc-stage2
580 # See Note [No stage2 packages when CrossCompiling or Stage1Only] in
581 # ./ghc.mk.
582 # - install ghc-stage1 instead of ghc-stage2
583 # - install the ghc-pkg that was built with the stage0 compiler
584 # - (*do* still build compiler/stage2 (i.e. the ghc library))
585 # - (*do* still build all other libraries)
586 #
587 # stage=1 means:
588 # - don't build compiler/stage2 (i.e. the ghc library)
589 # - don't build ghc-stage2 (the executable)
590 # Note: these are the only two things it does. If you want to exclude more
591 # stuff, combine it with Stage1Only=YES, or run make in the ghc or compiler
592 # directory.
593 #
594 # running make in the ghc or compiler directory means:
595 # - don't build any packages in the libraries/ directory, except the ones
596 # listed in PACKAGES_STAGE0 (i.e. the boot libraries)
597 #
598 # You may wonder why Stage1Only=YES still builds compiler/stage2. Quoting
599 # simonmar in #7639:
600 #
601 # "strictly speaking building compiler/stage2 is correct, because it is
602 # the ghc package that can be used with [ghc-stage1]. If you don't
603 # want to build it, then setting stage=1 in your mk/build.mk should
604 # disable it."
605
606 # C compiler and linker flags from configure (e.g. -m<blah> to select
607 # correct C compiler backend). The stage number is the stage of GHC
608 # that is being used to compile with.
609 CONF_CC_OPTS_STAGE0 = @CONF_CC_OPTS_STAGE0@
610 CONF_CC_OPTS_STAGE1 = @CONF_CC_OPTS_STAGE1@
611 CONF_CC_OPTS_STAGE2 = @CONF_CC_OPTS_STAGE2@
612 CONF_GCC_LINKER_OPTS_STAGE0 = @CONF_GCC_LINKER_OPTS_STAGE0@
613 CONF_GCC_LINKER_OPTS_STAGE1 = @CONF_GCC_LINKER_OPTS_STAGE1@
614 CONF_GCC_LINKER_OPTS_STAGE2 = @CONF_GCC_LINKER_OPTS_STAGE2@
615 CONF_LD_LINKER_OPTS_STAGE0 = @CONF_LD_LINKER_OPTS_STAGE0@
616 CONF_LD_LINKER_OPTS_STAGE1 = @CONF_LD_LINKER_OPTS_STAGE1@
617 CONF_LD_LINKER_OPTS_STAGE2 = @CONF_LD_LINKER_OPTS_STAGE2@
618 CONF_CPP_OPTS_STAGE0 = @CONF_CPP_OPTS_STAGE0@
619 CONF_CPP_OPTS_STAGE1 = @CONF_CPP_OPTS_STAGE1@
620 CONF_CPP_OPTS_STAGE2 = @CONF_CPP_OPTS_STAGE2@
621 CONF_HC_OPTS_STAGE0 = @CONF_HC_OPTS_STAGE0@
622 CONF_HC_OPTS_STAGE1 = @CONF_HC_OPTS_STAGE1@
623 CONF_HC_OPTS_STAGE2 = @CONF_HC_OPTS_STAGE2@
624
625 # The .hsc files aren't currently safe for cross-compilation on Windows:
626 # libraries\haskeline\.\System\Console\Haskeline\Backend\Win32.hsc:160
627 # directive "let" is not safe for cross-compilation
628 ifneq "$(Windows_Host)" "YES"
629 SRC_HSC2HS_OPTS += --cross-safe
630 endif
631 SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
632
633 define set_stage_HSC2HS_OPTS
634 # $1 = stage
635 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(filter-out -O,$$(SRC_CC_OPTS) $$(CONF_CC_OPTS_STAGE$1)))
636 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --cflag=,$$(CONF_CPP_OPTS_STAGE$1))
637 SRC_HSC2HS_OPTS_STAGE$1 += $$(addprefix --lflag=,$$(CONF_GCC_LINKER_OPTS_STAGE$1))
638 endef
639 $(eval $(call set_stage_HSC2HS_OPTS,0))
640 $(eval $(call set_stage_HSC2HS_OPTS,1))
641 $(eval $(call set_stage_HSC2HS_OPTS,2))
642 ifeq "$(CrossCompiling)" "YES"
643 SRC_HSC2HS_OPTS_STAGE1 += --cross-compile
644 SRC_HSC2HS_OPTS_STAGE2 += --cross-compile
645 endif
646 SRC_HSC2HS_OPTS_STAGE0 += --cflag=-D$(HostArch_CPP)_HOST_ARCH --cflag=-D$(HostOS_CPP)_HOST_OS
647 SRC_HSC2HS_OPTS_STAGE1 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH --cflag=-D$(TargetOS_CPP)_HOST_OS
648 SRC_HSC2HS_OPTS_STAGE2 += --cflag=-D$(TargetArch_CPP)_HOST_ARCH --cflag=-D$(TargetOS_CPP)_HOST_OS
649
650 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
651 WINDRES = $(INPLACE_MINGW)/bin/windres
652 else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
653 WINDRES = $(INPLACE_MINGW)/bin/windres
654 endif
655
656 #-----------------------------------------------------------------------------
657 # Mingwex Library
658 #
659 HaveLibMingwEx = @HaveLibMingwEx@
660 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
661 DLLTOOL = inplace/mingw/bin/dlltool.exe
662 else ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
663 DLLTOOL = inplace/mingw/bin/dlltool.exe
664 endif
665
666 #-----------------------------------------------------------------------------
667 # Other standard (ha!) Unix utilities
668
669 AR = @ArCmd@
670 AR_OPTS = @ArArgs@
671 ArSupportsAtFile = @ArSupportsAtFile@
672
673 AR_STAGE0 = @AR_STAGE0@
674 AR_STAGE1 = $(AR)
675 AR_STAGE2 = $(AR)
676 AR_STAGE3 = $(AR)
677 AR_OPTS_STAGE0 = @AR_OPTS_STAGE0@
678 AR_OPTS_STAGE1 = $(AR_OPTS)
679 AR_OPTS_STAGE2 = $(AR_OPTS)
680 AR_OPTS_STAGE3 = $(AR_OPTS)
681 EXTRA_AR_ARGS_STAGE0 = $(EXTRA_AR_ARGS)
682 EXTRA_AR_ARGS_STAGE1 = $(EXTRA_AR_ARGS)
683 EXTRA_AR_ARGS_STAGE2 = $(EXTRA_AR_ARGS)
684 EXTRA_AR_ARGS_STAGE3 = $(EXTRA_AR_ARGS)
685 ArSupportsAtFile_STAGE0 = @ArSupportsAtFile_STAGE0@
686 ArSupportsAtFile_STAGE1 = $(ArSupportsAtFile)
687 ArSupportsAtFile_STAGE2 = $(ArSupportsAtFile)
688 ArSupportsAtFile_STAGE3 = $(ArSupportsAtFile)
689
690 CONTEXT_DIFF = @ContextDiffCmd@
691 CP = cp
692
693 # It's not easy to separate the CPP program from its flags, as
694 # AC_PROG_CPP defines CPP as "/usr/bin/gcc -E"
695 CPP = @CPP@ @CPPFLAGS@
696 HS_CPP = @HaskellCPPCmd@ @HaskellCPPArgs@
697
698 FIND = @FindCmd@
699
700 #
701 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
702 # install-sh script (if chosen). This not terribly useful to us, so we convert
703 # it into an abs. path.
704 #
705 INSTALL = @INSTALL@
706 INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL))
707
708 LN_S = @LN_S@
709 MV = mv
710 PERL = @PerlCmd@
711 PIC = pic
712 RANLIB_CMD = @RANLIB_CMD@
713 REAL_RANLIB_CMD = @REAL_RANLIB_CMD@
714 SED = @SedCmd@
715 SHELL = @SHELL@
716
717 HaveDtrace = @HaveDtrace@
718 USE_DTRACE = $(HaveDtrace)
719 DTRACE = @DtraceCmd@
720
721 LD = @LdCmd@
722 NM = @NmCmd@
723 AR = @ArCmd@
724 OBJDUMP = @ObjdumpCmd@
725
726 LLC = @LlcCmd@
727 OPT = @OptCmd@
728
729 # GNU ld supports input via a linker script, which is useful to avoid
730 # overflowing command-line length limits.
731 LdIsGNULd = @LdIsGNULd@
732
733 # Set to YES if ld has the --build-id flag. Sometimes we need to
734 # disable it with --build-id=none.
735 LdHasBuildId = @LdHasBuildId@
736
737 # Set to YES if ld has the --no_compact_unwind flag. See #5019
738 # and compiler/main/DriverPipeline.hs.
739 LdHasNoCompactUnwind = @LdHasNoCompactUnwind@
740
741 # On MSYS, building with SplitObjs=YES fails with
742 # ar: Bad file number
743 # see #3201. We need to specify a smaller max command-line size
744 # to work around it. 32767 doesn't work; 30000 does, but says
745 # xargs: value for -s option should be < 28153
746 # so we now use 20000 to be comfortably below this bound
747 XARGS = xargs
748 ifeq "$(Windows_Host)" "YES"
749 XARGS_OPTS = -s 20000
750 endif
751
752 ifeq "$(TARGETPLATFORM)" "x86_64-unknown-mingw32"
753 STRIP_CMD = $(TOP)/inplace/mingw/bin/strip.exe
754 else ifeq "$(TARGETPLATFORM)" "arm-unknown-linux"
755 # The Cortex A8 hardware apparently has a bug which ld.gold will check for;
756 # however in order to do so it must have unstripped executables lest we
757 # see warnings of the form (see #10376, #10464),
758 #
759 # /usr/bin/ld.gold: warning: cannot scan executable section 1 of ... for
760 # Cortex-A8 erratum because it has no mapping symbols.
761 #
762 # Consequently we disabling stripping by default on this architecture.
763 # The hack of using `:` to disable stripping is implemented by ghc-cabal.
764 STRIP_CMD = :
765 else
766 STRIP_CMD = strip
767 endif
768 PATCH_CMD = @PatchCmd@
769 TAR_CMD = @TarCmd@
770 BZIP2_CMD = bzip2
771 GZIP_CMD = gzip
772 XZ_CMD = xz
773
774 # xz is default compression
775 TAR_COMP ?= xz
776
777 # select compression command and .tar extension based on TAR_COMP value
778 ifeq "$(TAR_COMP)" "bzip2"
779 TAR_COMP_CMD = $(BZIP2_CMD)
780 TAR_COMP_EXT = bz2
781 else ifeq "$(TAR_COMP)" "gzip"
782 TAR_COMP_CMD = $(GZIP_CMD)
783 TAR_COMP_EXT = gz
784 else ifeq "$(TAR_COMP)" "xz"
785 TAR_COMP_CMD = $(XZ_CMD)
786 TAR_COMP_EXT = xz
787 else
788 $(error $$(TAR_COMP) set to unknown value "$(TAR_COMP)" (supported: "bzip2", "gzip", "xz"))
789 endif
790
791 ifeq "$(Windows_Host)" "YES"
792 TOUCH_CMD = $(utils/touchy_dist_INPLACE)
793 TOUCH_DEP = $(TOUCH_CMD)
794 else
795 TOUCH_CMD = touch
796 TOUCH_DEP =
797 endif
798
799 HSCOLOUR_CMD = @HSCOLOUR@
800
801 TIME_CMD = @TimeCmd@
802
803 #-----------------------------------------------------------------------------
804 # Sphinx stuff
805
806 SPHINXBUILD = @SPHINXBUILD@
807 BUILD_MAN = @BUILD_MAN@
808 BUILD_SPHINX_HTML = @BUILD_SPHINX_HTML@
809 BUILD_SPHINX_PDF = @BUILD_SPHINX_PDF@
810 SPHINXOPTS = -D latex_paper_size=letter
811 XELATEX = @XELATEX@
812
813 #-----------------------------------------------------------------------------
814 # FPtools support software
815
816 #
817 # ghc-pkg
818 #
819 GHC_PKG = @GhcPkgCmd@
820
821 #
822 # Happy
823 #
824 HAPPY = @HappyCmd@
825 HAPPY_VERSION = @HappyVersion@
826 #
827 # Options to pass to Happy when we're going to compile the output with GHC
828 #
829 SRC_HAPPY_OPTS = -agc --strict
830
831 #
832 # Alex
833 #
834 ALEX = @AlexCmd@
835 ALEX_VERSION = @AlexVersion@
836 Alex3 = @Alex3@
837 #
838 # Options to pass to Alex when we're going to compile the output with GHC
839 #
840 SRC_ALEX_OPTS = -g
841 ifeq "$(Alex3)" "YES"
842 # The compiler isn't using the Unicode support in Alex 3.0 yet, in fact we do our own
843 # Unicode handling, so diable Alex's.
844 compiler_ALEX_OPTS = --latin1
845 endif
846
847 # Should we build haddock docs?
848 HADDOCK_DOCS = YES
849 # And HsColour the sources?
850 ifeq "$(HSCOLOUR_CMD)" ""
851 HSCOLOUR_SRCS = NO
852 else
853 HSCOLOUR_SRCS = YES
854 endif
855
856 # Build and install DPH?
857 BUILD_DPH = NO
858 # Build and install the "extra" packages (see ./packages)?
859 BUILD_EXTRA_PKGS = NO
860
861 ################################################################################
862 #
863 # Library configure arguments
864 #
865 ################################################################################
866
867 CONFIGURE_ARGS = @CONFIGURE_ARGS@
868
869 ################################################################################
870 #
871 # To be passed to sub-builds
872 #
873 ################################################################################
874
875 ICONV_INCLUDE_DIRS = @ICONV_INCLUDE_DIRS@
876 ICONV_LIB_DIRS = @ICONV_LIB_DIRS@
877
878 GMP_INCLUDE_DIRS = @GMP_INCLUDE_DIRS@
879 GMP_LIB_DIRS = @GMP_LIB_DIRS@
880
881 CURSES_INCLUDE_DIRS = @CURSES_INCLUDE_DIRS@
882 CURSES_LIB_DIRS = @CURSES_LIB_DIRS@