Remove redundant imports
[ghc.git] / ghc.mk
diff --git a/ghc.mk b/ghc.mk
index 7337c27..4aea480 100644 (file)
--- a/ghc.mk
+++ b/ghc.mk
@@ -14,8 +14,6 @@
 #
 #   * remove old Makefiles, add new stubs for building in subdirs
 #     * docs/Makefile
-#     * docs/docbook-cheat-sheet/Makefile
-#     * docs/man/Makefile
 #     * docs/storage-mgmt/Makefile
 #     * docs/vh/Makefile
 #     * rts/dotnet/Makefile
@@ -140,14 +138,22 @@ endif
 endif
 
 include mk/ways.mk
-include mk/warnings.mk
 
 # (Optional) build-specific configuration
 include mk/custom-settings.mk
-SRC_CC_OPTS     += $(WERROR)
-SRC_HC_OPTS     += $(WERROR)
+
+# The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append
+# '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after
+# mk/custom-settings.mk.
+include mk/warnings.mk
+
+# -----------------------------------------------------------------------------
+# Check for inconsistent settings, after reading mk/build.mk.
+# Although mk/config.mk should always contain consistent settings (set by
+# configure), mk/build.mk can contain pretty much anything.
 
 ifneq "$(CLEANING)" "YES"
+
 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
 ifeq "$(findstring dyn,$(GhcLibWays))" ""
 $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
@@ -157,13 +163,42 @@ ifeq "$(findstring v,$(GhcLibWays))" ""
 $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
 endif
 endif
+
 ifeq "$(GhcProfiled)" "YES"
 ifeq "$(findstring p,$(GhcLibWays))" ""
 $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
 endif
 endif
+
+ifeq "$(BUILD_SPHINX_HTML)" "YES"
+ifeq "$(SPHINXBUILD)" ""
+$(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \
+  Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \
+  (when validating), or install `sphinx-build` and rerun `./configure`. \
+  See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
+endif
+
+ifeq "$(BUILD_SPHINX_PDF)" "YES"
+ifeq "$(XELATEX)" ""
+$(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \
+  Install `xelatex`, then rerun `./configure`. \
+  See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
+endif
+
+ifeq "$(HSCOLOUR_SRCS)" "YES"
+ifeq "$(HSCOLOUR_CMD)" ""
+$(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \
+  Run `cabal install hscolour`, then rerun `./configure`. \
+  See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
 endif
 
+endif # CLEANING
+
+# -----------------------------------------------------------------------------
+
 ifeq "$(phase)" ""
 phase = final
 endif
@@ -308,7 +343,7 @@ include rules/manual-package-config.mk
 # -----------------------------------------------------------------------------
 # Docs
 
-include rules/docbook.mk
+include rules/sphinx.mk
 
 # -----------------------------------------------------------------------------
 # Making bindists and sdists
@@ -377,7 +412,7 @@ else # CLEANING
 # programs such as GHC and ghc-pkg, that we do not assume the stage0
 # compiler already has installed (or up-to-date enough).
 
-PACKAGES_STAGE0 = binary Cabal/Cabal hpc bin-package-db hoopl transformers template-haskell
+PACKAGES_STAGE0 = binary Cabal/Cabal hpc ghc-boot hoopl transformers template-haskell
 ifeq "$(Windows_Host)" "NO"
 ifneq "$(HostOS_CPP)" "ios"
 PACKAGES_STAGE0 += terminfo
@@ -405,10 +440,10 @@ PACKAGES_STAGE1 += directory
 PACKAGES_STAGE1 += process
 PACKAGES_STAGE1 += hpc
 PACKAGES_STAGE1 += pretty
-PACKAGES_STAGE1 += template-haskell
 PACKAGES_STAGE1 += binary
 PACKAGES_STAGE1 += Cabal/Cabal
-PACKAGES_STAGE1 += bin-package-db
+PACKAGES_STAGE1 += ghc-boot
+PACKAGES_STAGE1 += template-haskell
 PACKAGES_STAGE1 += hoopl
 PACKAGES_STAGE1 += transformers
 
@@ -423,7 +458,9 @@ endif
 endif
 PACKAGES_STAGE1 += haskeline
 
-ifneq "$(CrossCompiling)" "YES"
+# See Note [No stage2 packages when CrossCompiling or Stage1Only].
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
+ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO"
 define addExtraPackage
 ifeq "$2" "-"
 # Do nothing; this package is already handled above
@@ -445,6 +482,7 @@ endif
 
 # We install all packages that we build.
 INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
 ifneq "$(Stage1Only)" "YES"
 INSTALL_PACKAGES += compiler
 endif
@@ -453,7 +491,7 @@ INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
 endif # CLEANING
 
 # -------------------------------------------
-# Dependencies between package-data.mk files
+# Note [Dependencies between package-data.mk files].
 
 # We cannot run ghc-cabal to configure a package until we have
 # configured and registered all of its dependencies.  So the following
@@ -473,29 +511,35 @@ ifneq "$(BINDIST)" "YES"
 fixed_pkg_prev=
 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 
+# Intermezzo: utils that we build with the stage1 compiler. They depend on
+# the stage1 packages, so we have to make sure those packages get configured
+# and registered before we can start with these. Note that they don't depend on
+# eachother, so we can configure them in parallel.
+utils/ghc-pwd/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev)
+
 # the GHC package doesn't live in libraries/, so we add its dependency manually:
 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
-fixed_pkg_prev:=compiler/stage2/package-data.mk
 
 # and continue with PACKAGES_STAGE2, which depend on GHC:
+fixed_pkg_prev:=compiler/stage2/package-data.mk
 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 
 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
-# haddock depends on ghc and some libraries, but depending on GHC's
-# package-data.mk is sufficient, as that in turn depends on all the
-# libraries
-utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
 
+# Utils that we build with the stage2 compiler.
+# They depend on the ghc library and some other libraries, but depending on
+# the ghc library's package-data.mk is sufficient, as that in turn depends on
+# all the other libraries' package-data.mk files.
+utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
 utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/dll-split/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/hpc/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
+utils/check-api-annotations/dist-install/package-data.mk: compiler/stage2/package-data.mk
 utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
 
 # add the final package.conf dependency: ghc-prim depends on RTS
@@ -563,26 +607,12 @@ endif
 
 # -----------------------------------------------------------------------------
 # Include build instructions from all subdirs
-
-ifneq "$(BINDIST)" "YES"
 BUILD_DIRS += utils/mkdirhier
-endif
-
-ifeq "$(Windows_Host)" "YES"
 BUILD_DIRS += utils/touchy
-endif
-
 BUILD_DIRS += utils/unlit
 BUILD_DIRS += utils/hp2ps
-
-ifneq "$(GhcUnregisterised)" "YES"
 BUILD_DIRS += driver/split
-endif
-
-ifneq "$(BINDIST)" "YES"
 BUILD_DIRS += utils/genprimopcode
-endif
-
 BUILD_DIRS += driver
 BUILD_DIRS += driver/ghci
 BUILD_DIRS += driver/ghc
@@ -591,11 +621,8 @@ BUILD_DIRS += libffi
 BUILD_DIRS += utils/deriveConstants
 BUILD_DIRS += includes
 BUILD_DIRS += rts
-
-ifneq "$(BINDIST)" "YES"
 BUILD_DIRS += bindisttest
 BUILD_DIRS += utils/genapply
-endif
 
 # When cleaning, don't add any library packages to BUILD_DIRS. We include
 # ghc.mk files for all BUILD_DIRS, but they don't exist until after running
@@ -619,52 +646,72 @@ BUILD_DIRS += $(wildcard libraries/dph)
 endif
 endif
 
-
-ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 BUILD_DIRS += libraries/integer-gmp/gmp
-else ifeq "$(CLEANING)" "YES"
-BUILD_DIRS += libraries/integer-gmp/gmp
-endif
-
-ifeq "$(HADDOCK_DOCS)" "YES"
-BUILD_DIRS += utils/haddock
-BUILD_DIRS += utils/haddock/doc
-else ifeq "$(CLEANING)" "YES"
 BUILD_DIRS += utils/haddock
 BUILD_DIRS += utils/haddock/doc
-endif
-
 BUILD_DIRS += compiler
 BUILD_DIRS += utils/hsc2hs
 BUILD_DIRS += utils/ghc-pkg
 BUILD_DIRS += utils/testremove
-ifneq "$(Stage1Only)" "YES"
 BUILD_DIRS += utils/ghctags
-endif
+BUILD_DIRS += utils/check-api-annotations
 BUILD_DIRS += utils/dll-split
 BUILD_DIRS += utils/ghc-pwd
 BUILD_DIRS += utils/ghc-cabal
 BUILD_DIRS += utils/hpc
-ifeq "$(GhcWithInterpreter)" "YES"
-BUILD_DIRS += utils/runghc
-else ifeq "$(CLEANING)" "YES"
 BUILD_DIRS += utils/runghc
-endif
 BUILD_DIRS += ghc
-
-ifneq "$(BINDIST)" "YES"
-ifneq "$(CrossCompiling)-$(phase)" "YES-final"
 BUILD_DIRS += utils/mkUserGuidePart
-endif
-endif
-
 BUILD_DIRS += docs/users_guide
-BUILD_DIRS += docs/man
 BUILD_DIRS += utils/count_lines
 BUILD_DIRS += utils/compare_sizes
 
 # ----------------------------------------------
-# Actually include all the sub-ghc.mk's
+# Actually include the sub-ghc.mk's
+
+ifeq "$(CLEANING)" "YES"
+# Don't exclude any BUILD_DIRS when cleaning. When you for example build
+# haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean'
+# should still clean the haddock directory.
+else # CLEANING
+ifeq "$(BINDIST)" "YES"
+BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
+endif
+ifeq "$(HADDOCK_DOCS)" "NO"
+BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS))
+endif
+ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO NO"
+# Don't to build this little utility if we're not building the User's Guide.
+BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
+endif
+ifeq "$(Windows_Host)" "NO"
+BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS))
+endif
+ifeq "$(GhcUnregisterised)" "YES"
+BUILD_DIRS := $(filter-out driver/split,$(BUILD_DIRS))
+endif
+ifeq "$(GhcWithInterpreter)" "NO"
+# runghc is just GHCi in disguise
+BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS))
+endif
+ifneq "$(INTEGER_LIBRARY)" "integer-gmp"
+BUILD_DIRS := $(filter-out libraries/integer-gmp/gmp,$(BUILD_DIRS))
+endif
+ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
+# See Note [No stage2 packages when CrossCompiling or Stage1Only].
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
+BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/ghctags,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/check-api-annotations,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
+endif
+endif # CLEANING
 
 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
 
@@ -696,7 +743,7 @@ ifneq "$(BINDIST)" "YES"
 
 ifneq "$(BOOTSTRAPPING_CONF)" ""
 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
-$(shell $(GHC_PKG) init $(BOOTSTRAPPING_CONF))
+$(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF))
 endif
 endif
 
@@ -707,6 +754,11 @@ $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
 # lost).
 fixed_pkg_prev=
 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
+# ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is
+# this really true?), depends on several boot packages (e.g. Cabal and
+# ghc-boot). They need to be configured before ghc-pkg, so we add a
+# dependency between their package-data.mk files. See also Note
+# [Dependencies between package-data.mk files].
 utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
 compiler/stage1/package-data.mk:    $(fixed_pkg_prev)
 endif
@@ -823,17 +875,17 @@ install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS)
        for i in $(INSTALL_BINS); do \
                $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ;  \
        done
+ifneq "$(INSTALL_SCRIPTS)" ""
        for i in $(INSTALL_SCRIPTS); do \
                $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ;  \
        done
+endif
 
 install_libs: $(INSTALL_LIBS)
        $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
 
 install_libexecs:  $(INSTALL_LIBEXECS)
-ifeq "$(INSTALL_LIBEXECS)" ""
-       @:
-else
+ifneq "$(INSTALL_LIBEXECS)" ""
        $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
        for i in $(INSTALL_LIBEXECS); do \
                $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
@@ -848,9 +900,11 @@ install_topdirs: $(INSTALL_TOPDIR_BINS) $(INSTALL_TOPDIR_SCRIPTS)
        for i in $(INSTALL_TOPDIR_BINS); do \
                $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
        done
+ifneq "$(INSTALL_TOPDIR_SCRIPTS)" ""
        for i in $(INSTALL_TOPDIR_SCRIPTS); do \
                $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(topdir)"; \
        done
+endif
 
 install_docs: $(INSTALL_DOCS)
        $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
@@ -870,9 +924,14 @@ ifneq "$(INSTALL_LIBRARY_DOCS)" ""
        $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
 endif
 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
+# We need to filter out the directories so install doesn't choke on them
        for i in $(INSTALL_HTML_DOC_DIRS); do \
                $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
-               $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
+               for f in $$i/*; do \
+                       if test -f $$f; then \
+                               $(INSTALL_DOC) $(INSTALL_OPTS) "$$f" "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
+                       fi \
+               done \
        done
 endif
 
@@ -997,9 +1056,8 @@ unix-binary-dist-prep:
        "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
        set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
        echo "HADDOCK_DOCS       = $(HADDOCK_DOCS)"       >> $(BIN_DIST_MK)
-       echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
-       echo "BUILD_DOCBOOK_PS   = $(BUILD_DOCBOOK_PS)"   >> $(BIN_DIST_MK)
-       echo "BUILD_DOCBOOK_PDF  = $(BUILD_DOCBOOK_PDF)"  >> $(BIN_DIST_MK)
+       echo "BUILD_SPHINX_HTML  = $(BUILD_SPHINX_HTML)"  >> $(BIN_DIST_MK)
+       echo "BUILD_SPHINX_PDF   = $(BUILD_SPHINX_PDF)"   >> $(BIN_DIST_MK)
        echo "BUILD_MAN          = $(BUILD_MAN)"          >> $(BIN_DIST_MK)
        echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
        echo "UseSystemLibFFI    = $(UseSystemLibFFI)"    >> $(BIN_DIST_MK)
@@ -1285,6 +1343,7 @@ distclean : clean
        $(call removeFiles,settings)
        $(call removeFiles,docs/users_guide/ug-book.xml)
        $(call removeFiles,docs/users_guide/ug-ent.xml)
+       $(call removeFiles,docs/users_guide/ghc_config.py)
        $(call removeFiles,docs/index.html)
        $(call removeFiles,libraries/prologue.txt)
        $(call removeFiles,distrib/configure.ac)
@@ -1324,8 +1383,10 @@ distclean : clean
 # Not sure why this is being cleaned here.
        $(call removeTrees,includes/dist-derivedconstants)
 
-# Finally, clean the inplace tree.
-       $(call removeTrees,inplace)
+# Also clean Windows-only inplace directories.
+# Don't delete 'inplace' itself, it contains source files.
+       $(call removeTrees,inplace/mingw)
+       $(call removeTrees,inplace/perl)
 
 maintainer-clean : distclean
        $(call removeFiles,configure mk/config.h.in)
@@ -1376,6 +1437,50 @@ endif
        cd libraries/xhtml && ./Setup clean   --builddir=dist-bindist
        cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
 
+# Note [No stage2 packages when CrossCompiling or Stage1Only]
+#
+# (first read Note [CrossCompiling vs Stage1Only] and
+#  Note [Stage1Only vs stage=1] in mk/config.mk.in)
+#
+# When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the
+# following packages from the build:
+#   * packages that we build with ghc-stage2 [1]
+#   * packages that depend on the ghc library [2]
+#
+# Here's why:
+#  - first of all, ghc-stage1 can't use stage0's ghc library (it's too old)
+#  - neither do we register the ghc library (compiler/stage1) that we build
+#    with stage0. TODO Why not? We do build it...
+#  - as a result, we need to a) use ghc-stage2 to build packages that depend on
+#    the ghc library (e.g. ghctags [4] and mkUserGuidePart) and b) exclude
+#    those packages when ghc-stage2 is not available.
+#  - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just
+#    said we didn't want it), so we have to exclude the stage2 packages from
+#    the build. This includes the case where Stage1Only=YES is combined with
+#    CrossCompiling=YES (Building GHC as a cross-compiler [3]).
+#  - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself
+#    [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't
+#    run on the host platform at all; it is built to run on $(TARGETPLATFORM)"
+#    [5]. Therefore in this case we also have to exclude the stage2 packages
+#    from the build.
+#
+#  [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2'
+#
+#  [2]
+#  find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)'
+#
+#  [3] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
+#
+#  [4] 5fb72555f7b7ab67a33583f33ad9160761ca434f
+#      "ghctags needs the stage2 compiler, since it uses the GHC API."
+#
+#  [5] * bc31dbe8ee22819054df60f5ef219fed393a1c54
+#      "Disable any packages built with stage 2 when cross-compiling
+#       Since we can't run stage 2 on the host."
+#
+#      * 72995160b0b190577b5c0cb8d7bd0426cc455b05
+#      "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)"
+
 # -----------------------------------------------------------------------------
 # Numbered phase targets