#
# * remove old Makefiles, add new stubs for building in subdirs
# * docs/Makefile
-# * docs/docbook-cheat-sheet/Makefile
-# * docs/man/Makefile
# * docs/storage-mgmt/Makefile
# * docs/vh/Makefile
# * rts/dotnet/Makefile
# o Build utils/ghc-cabal
# o Build utils/ghc-pkg
# o Build utils/hsc2hs
+# o Build utils/genprimopcode
+# o Build utils/deriveConstants
# * For each package:
-# o configure, generate package-data.mk and inplace-pkg-info
+# o configure, generate package-data.mk and inplace-pkg-config
# o register each package into inplace/lib/package.conf
# * build libffi (if not disabled by --with-system-libffi)
# * With bootstrapping compiler:
# o Build libraries/{filepath,hpc,Cabal}
# o Build compiler (stage 1)
-# * With stage 1:
+# * With stage 1 compiler:
# o Build libraries/*
# o Build rts
# o Build utils/* (except haddock)
# o Build compiler (stage 2)
-# * With stage 2:
+# * With stage 2 compiler:
# o Build utils/haddock
# o Build compiler (stage 3) (optional)
# * With haddock:
endif
##################################################
-
+# -----------------------------------------------------------------------------
# Catch make if it runs away into an infinite loop
ifeq "$(MAKE_RESTARTS)" ""
else ifeq "$(MAKE_RESTARTS)" "1"
$(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
endif
-ifneq "$(CLEANING)" "YES"
-CLEANING = NO
-endif
-
# -----------------------------------------------------------------------------
# Misc GNU make utils
space=$(nothing) $(nothing)
comma=,
-# Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
-# by default, because that disables all the implicit rules, but there doesn't
-# seem to be a good way to do that. This turns off all the old-style suffix
-# rules, which does half the job and speeds up make quite a bit:
-.SUFFIXES:
-
# -----------------------------------------------------------------------------
# Makefile debugging
#
include mk/tree.mk
-ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
+ifneq "$(CLEANING)" "YES"
include mk/config.mk
ifeq "$(ProjectVersion)" ""
$(error Please run ./configure first)
# (Optional) build-specific configuration
include mk/custom-settings.mk
-ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
+# The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append
+# '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after
+# mk/custom-settings.mk.
+include mk/warnings.mk
+
+# -----------------------------------------------------------------------------
+# Check for inconsistent settings, after reading mk/build.mk.
+# Although mk/config.mk should always contain consistent settings (set by
+# configure), mk/build.mk can contain pretty much anything.
+
+ifneq "$(CLEANING)" "YES"
+
ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
ifeq "$(findstring dyn,$(GhcLibWays))" ""
$(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
$(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
endif
endif
+
ifeq "$(GhcProfiled)" "YES"
ifeq "$(findstring p,$(GhcLibWays))" ""
$(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
endif
endif
+
+ifeq "$(BUILD_SPHINX_HTML)" "YES"
+ifeq "$(SPHINXBUILD)" ""
+$(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \
+ Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \
+ (when validating), or install `sphinx-build` and rerun `./configure`. \
+ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
+endif
+
+ifeq "$(BUILD_SPHINX_PDF)" "YES"
+ifeq "$(XELATEX)" ""
+$(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \
+ Install `xelatex`, then rerun `./configure`. \
+ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
endif
+ifeq "$(HSCOLOUR_SRCS)" "YES"
+ifeq "$(HSCOLOUR_CMD)" ""
+$(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \
+ Run `cabal install hscolour`, then rerun `./configure`. \
+ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
+endif
+endif
+
+ifeq "$(HADDOCK_DOCS)" "YES"
+ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
+$(error Can not build haddock docs when CrossCompiling or Stage1Only. \
+ Set HADDOCK_DOCS=NO in your mk/build.mk file. \
+ See Note [No stage2 packages when CrossCompiling or Stage1Only])
+endif
+endif
+
+ifneq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO"
+# The User's Guide requires mkUserGuidePart, which uses the GHC API.
+ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
+$(error Can not build User's Guide when CrossCompiling or Stage1Only. \
+ Set BUILD_SPHINX_HTML=NO, BUILD_SPHINX_PDF=NO in your \
+ mk/build.mk file. \
+ See Note [No stage2 packages when CrossCompiling or Stage1Only])
+endif
+endif
+
+endif # CLEANING
+
+# -----------------------------------------------------------------------------
+
ifeq "$(phase)" ""
phase = final
endif
# When we're just doing 'make clean' or 'make show', then we don't need
# to build dependencies.
-ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
+ifeq "$(CLEANING)" "YES"
NO_INCLUDE_DEPS = YES
NO_INCLUDE_PKGDATA = YES
endif
ifeq "$(GhcDebugged)" "YES"
WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
endif
-WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_NAME
+WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE
# -----------------------------------------------------------------------------
# Compilation Flags
# Suffix rules cause "make clean" to fail on Windows (trac #3233)
# so we don't make any when cleaning.
ifneq "$(CLEANING)" "YES"
-
include rules/hs-suffix-rules-srcdir.mk
include rules/hs-suffix-way-rules-srcdir.mk
include rules/hs-suffix-way-rules.mk
include rules/hi-rule.mk
include rules/c-suffix-rules.mk
include rules/cmm-suffix-rules.mk
-
-endif # CLEANING=YES
+endif
# -----------------------------------------------------------------------------
# Building package-data.mk files from .cabal files
# -----------------------------------------------------------------------------
# Docs
-include rules/docbook.mk
+include rules/sphinx.mk
# -----------------------------------------------------------------------------
-# Making bindists
+# Making bindists and sdists
include rules/bindist.mk
+include rules/sdist-ghc-file.mk
# -----------------------------------------------------------------------------
# Directories
# Packages to build
# The lists of packages that we *actually* going to build in each stage:
#
-# $(PACKAGES_STAGE0)
+# $(PACKAGES_STAGE0)
# $(PACKAGES_STAGE1)
# $(PACKAGES_STAGE2)
#
endef
$(eval $(call foreachLibrary,addLibraryForCleaning))
-else
+else # CLEANING
# Packages that are built by stage0. These packages are dependencies of
# programs such as GHC and ghc-pkg, that we do not assume the stage0
# compiler already has installed (or up-to-date enough).
-PACKAGES_STAGE0 = Cabal/Cabal hpc bin-package-db hoopl transformers
+PACKAGES_STAGE0 = binary Cabal/Cabal hpc ghc-boot-th ghc-boot hoopl transformers template-haskell ghci
ifeq "$(Windows_Host)" "NO"
-ifneq "$(HostOS_CPP)" "ios"
PACKAGES_STAGE0 += terminfo
endif
-endif
PACKAGES_STAGE1 += ghc-prim
PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
PACKAGES_STAGE1 += deepseq
PACKAGES_STAGE1 += bytestring
PACKAGES_STAGE1 += containers
-PACKAGES_STAGE1 += old-locale
-ifeq "$(Windows_Host)" "YES"
+ifeq "$(Windows_Target)" "YES"
PACKAGES_STAGE1 += Win32
endif
PACKAGES_STAGE1 += time
-ifeq "$(Windows_Host)" "NO"
+ifeq "$(Windows_Target)" "NO"
PACKAGES_STAGE1 += unix
endif
PACKAGES_STAGE1 += process
PACKAGES_STAGE1 += hpc
PACKAGES_STAGE1 += pretty
-PACKAGES_STAGE1 += template-haskell
-PACKAGES_STAGE1 += Cabal/Cabal
PACKAGES_STAGE1 += binary
-PACKAGES_STAGE1 += bin-package-db
+PACKAGES_STAGE1 += Cabal/Cabal
+PACKAGES_STAGE1 += ghc-boot-th
+PACKAGES_STAGE1 += ghc-boot
+PACKAGES_STAGE1 += template-haskell
PACKAGES_STAGE1 += hoopl
PACKAGES_STAGE1 += transformers
+PACKAGES_STAGE1 += compact
-ifneq "$(CrossCompiling)" "YES"
-PACKAGES_STAGE2 += old-time
-PACKAGES_STAGE2 += haskell98
-PACKAGES_STAGE2 += haskell2010
-endif
-
-# We normally install only the packages down to this point
-REGULAR_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
-ifeq "$(Stage1Only)" "NO"
-REGULAR_INSTALL_PACKAGES += compiler
+ifeq "$(HADDOCK_DOCS)" "YES"
+PACKAGES_STAGE1 += xhtml
endif
-REGULAR_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
-PACKAGES_STAGE1 += xhtml
ifeq "$(Windows_Target)" "NO"
-ifneq "$(TargetOS_CPP)" "ios"
PACKAGES_STAGE1 += terminfo
endif
-endif
PACKAGES_STAGE1 += haskeline
+PACKAGES_STAGE1 += ghci
-# If we have built the programs with dynamic libraries, then
-# ghc will be dynamically linked against haskeline.so etc, so
-# we need the dynamic libraries of everything down to here
-REGULAR_INSTALL_DYNLIBS := $(addprefix libraries/,$(PACKAGES_STAGE1))
-REGULAR_INSTALL_DYNLIBS += $(addprefix libraries/,$(PACKAGES_STAGE2))
-REGULAR_INSTALL_DYNLIBS := $(filter-out $(REGULAR_INSTALL_PACKAGES),\
- $(REGULAR_INSTALL_DYNLIBS))
-
-ifneq "$(CrossCompiling)" "YES"
+# See Note [No stage2 packages when CrossCompiling or Stage1Only].
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
+ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO"
define addExtraPackage
ifeq "$2" "-"
# Do nothing; this package is already handled above
-else ifeq "$2 $$(GhcProfiled)" "dph YES"
-# Ignore the package: These packages need TH, which is incompatible
-# with a profiled GHC
-else
+else ifeq "$2" "dph"
+ifeq "$$(BUILD_DPH) $$(GhcProfiled)" "YES NO"
+# The DPH packages need TH, which is incompatible with a profiled GHC.
PACKAGES_STAGE2 += $1
endif
+else ifeq "$2" "extra"
+ifeq "$$(BUILD_EXTRA_PKGS)" "YES"
+PACKAGES_STAGE2 += $1
+endif
+else
+$$(error Unknown package tag: $2)
+endif
endef
$(eval $(call foreachLibrary,addExtraPackage))
endif
-# If we want to just install everything, then we want all the packages
-SUPERSIZE_INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
-ifeq "$(Stage1Only)" "NO"
-SUPERSIZE_INSTALL_PACKAGES += compiler
+# We install all packages that we build.
+INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
+ifneq "$(Stage1Only)" "YES"
+INSTALL_PACKAGES += compiler
endif
-SUPERSIZE_INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
+INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
-INSTALL_DYNLIBS :=
-ifeq "$(InstallExtraPackages)" "NO"
-INSTALL_PACKAGES := $(REGULAR_INSTALL_PACKAGES)
-ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
-INSTALL_DYNLIBS := $(REGULAR_INSTALL_DYNLIBS)
-endif
-else
-INSTALL_PACKAGES := $(SUPERSIZE_INSTALL_PACKAGES)
-endif
-
-endif
+endif # CLEANING
# -------------------------------------------
-# Dependencies between package-data.mk files
+# Note [Dependencies between package-data.mk files].
# We cannot run ghc-cabal to configure a package until we have
# configured and registered all of its dependencies. So the following
fixed_pkg_prev=
$(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
+# Intermezzo: utils that we build with the stage1 compiler. They depend on
+# the stage1 packages, so we have to make sure those packages get configured
+# and registered before we can start with these. Note that they don't depend on
+# eachother, so we can configure them in parallel.
+utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev)
+utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev)
+iserv/stage2/package-data.mk: $(fixed_pkg_prev)
+iserv/stage2_p/package-data.mk: $(fixed_pkg_prev)
+iserv/stage2_dyn/package-data.mk: $(fixed_pkg_prev)
+
# the GHC package doesn't live in libraries/, so we add its dependency manually:
compiler/stage2/package-data.mk: $(fixed_pkg_prev)
-fixed_pkg_prev:=compiler/stage2/package-data.mk
# and continue with PACKAGES_STAGE2, which depend on GHC:
+fixed_pkg_prev:=compiler/stage2/package-data.mk
$(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
-# haddock depends on ghc and some libraries, but depending on GHC's
-# package-data.mk is sufficient, as that in turn depends on all the
-# libraries
-utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
+# Utils that we build with the stage2 compiler.
+# They depend on the ghc library and some other libraries, but depending on
+# the ghc library's package-data.mk is sufficient, as that in turn depends on
+# all the other libraries' package-data.mk files.
+utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/dll-split/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/hpc/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
-utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
+utils/check-api-annotations/dist-install/package-data.mk: compiler/stage2/package-data.mk
+utils/check-ppr/dist-install/package-data.mk: compiler/stage2/package-data.mk
utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
# add the final package.conf dependency: ghc-prim depends on RTS
--constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
# The actual .a and .so/.dll files: needed for dependencies.
-ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_v_LIB))
+$(foreach way,$(GhcLibWays),$(eval ALL_STAGE1_$(way)_LIBS = $$(foreach lib,$$(PACKAGES_STAGE1),$$(libraries/$$(lib)_dist-install_$(way)_LIB))))
+
+ALL_STAGE1_LIBS = $(ALL_STAGE1_v_LIBS)
+
ifeq "$(BuildSharedLibs)" "YES"
ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
endif
BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
+# Only build internal interpreter support for the stage2 ghci lib
+libraries/ghci_dist-install_CONFIGURE_OPTS += --flags=ghci
+
# ----------------------------------------
# Special magic for the ghc-prim package
ifneq "$(CLEANING)" "YES"
ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
-libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
+libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp
else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
else
# -----------------------------------------------------------------------------
# Include build instructions from all subdirs
-
-ifneq "$(BINDIST)" "YES"
BUILD_DIRS += utils/mkdirhier
-endif
-
-ifeq "$(Windows_Host)" "YES"
BUILD_DIRS += utils/touchy
-endif
-
BUILD_DIRS += utils/unlit
BUILD_DIRS += utils/hp2ps
-
-ifneq "$(GhcUnregisterised)" "YES"
BUILD_DIRS += driver/split
-endif
-
-ifneq "$(BINDIST)" "YES"
BUILD_DIRS += utils/genprimopcode
-endif
-
BUILD_DIRS += driver
BUILD_DIRS += driver/ghci
BUILD_DIRS += driver/ghc
BUILD_DIRS += utils/deriveConstants
BUILD_DIRS += includes
BUILD_DIRS += rts
-
-ifneq "$(BINDIST)" "YES"
-BUILD_DIRS += bindisttest
+BUILD_DIRS += bindisttest
BUILD_DIRS += utils/genapply
-endif
+# When cleaning, don't add any library packages to BUILD_DIRS. We include
+# ghc.mk files for all BUILD_DIRS, but they don't exist until after running
+# `./boot`. Running `make clean` before anything else, as well as running
+# `make maintainer-clean` twice, should work.
ifneq "$(CLEANING)" "YES"
# These are deliberately in reverse order, so as to ensure that
# there is no need to have them in dependency order. That's important
BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
+ifeq "$(BUILD_DPH)" "YES"
+# Note: `$(eval $(call foreachLibrary,addExtraPackage))` above adds the
+# packages listed in `libraries/dph/ghc-packages` (e.g. dph-base) to
+# PACKAGES_STAGE2. But not 'libraries/dph' itself (it doesn't have a cabal
+# file). Since it does have a ghc.mk file, we add it to BUILD_DIRS here.
BUILD_DIRS += $(wildcard libraries/dph)
endif
-
-
-ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
-BUILD_DIRS += libraries/integer-gmp/gmp
-BUILD_DIRS += libraries/integer-gmp/mkGmpDerivedConstants
-else ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
-BUILD_DIRS += libraries/integer-gmp/gmp
-BUILD_DIRS += libraries/integer-gmp/mkGmpDerivedConstants
endif
+BUILD_DIRS += libraries/integer-gmp/gmp
BUILD_DIRS += utils/haddock
BUILD_DIRS += utils/haddock/doc
BUILD_DIRS += compiler
BUILD_DIRS += utils/hsc2hs
BUILD_DIRS += utils/ghc-pkg
BUILD_DIRS += utils/testremove
-ifeq "$(Stage1Only)" "NO"
BUILD_DIRS += utils/ghctags
-endif
+BUILD_DIRS += utils/check-api-annotations
+BUILD_DIRS += utils/check-ppr
BUILD_DIRS += utils/dll-split
-BUILD_DIRS += utils/ghc-pwd
BUILD_DIRS += utils/ghc-cabal
BUILD_DIRS += utils/hpc
BUILD_DIRS += utils/runghc
BUILD_DIRS += ghc
-
-ifneq "$(BINDIST)" "YES"
-ifneq "$(CrossCompiling)-$(phase)" "YES-final"
BUILD_DIRS += utils/mkUserGuidePart
-endif
-endif
-
BUILD_DIRS += docs/users_guide
-BUILD_DIRS += docs/man
BUILD_DIRS += utils/count_lines
BUILD_DIRS += utils/compare_sizes
+BUILD_DIRS += iserv
# ----------------------------------------------
-# Actually include all the sub-ghc.mk's
+# Actually include the sub-ghc.mk's
+
+ifeq "$(CLEANING)" "YES"
+# Don't exclude any BUILD_DIRS when cleaning. When you for example build
+# haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean'
+# should still clean the haddock directory.
+else # CLEANING
+ifeq "$(BINDIST)" "YES"
+BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
+endif
+ifeq "$(HADDOCK_DOCS)" "NO"
+BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS))
+endif
+ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO"
+BUILD_DIRS := $(filter-out docs/users_guide,$(BUILD_DIRS))
+# Don't to build this little utility if we're not building the User's Guide.
+BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
+endif
+ifeq "$(Windows_Host)" "NO"
+BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS))
+endif
+ifeq "$(GhcUnregisterised)" "YES"
+BUILD_DIRS := $(filter-out driver/split,$(BUILD_DIRS))
+endif
+ifeq "$(GhcWithInterpreter)" "NO"
+# runghc is just GHCi in disguise
+BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS))
+endif
+ifneq "$(INTEGER_LIBRARY)" "integer-gmp"
+BUILD_DIRS := $(filter-out libraries/integer-gmp/gmp,$(BUILD_DIRS))
+endif
+ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
+# See Note [No stage2 packages when CrossCompiling or Stage1Only].
+# See Note [Stage1Only vs stage=1] in mk/config.mk.in.
+BUILD_DIRS := $(filter-out utils/ghctags,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/check-api-annotations,$(BUILD_DIRS))
+BUILD_DIRS := $(filter-out utils/check-ppr,$(BUILD_DIRS))
+endif
+endif # CLEANING
include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
.PHONY: stage1_libs
stage1_libs : $(ALL_STAGE1_LIBS)
+# We need this extra dependency when building our own libffi, because
+# GHCi.FFI.hs #includes ffi.h
+ifneq "$(UseSystemLibFFI)" "YES"
+libraries/ghci/dist-install/build/GHCi/FFI.hs : $(libffi_HEADERS)
+endif
+
# ----------------------------------------------
# Per-package compiler flags
-#
-# If you want to add per-package compiler flags, this
-# is the place to do it. Do it like this for package <pkg>
-#
-# libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
-# libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
-
-# Add $(GhcLibHcOpts) to all package builds
+#
+# If you want to add per-package compiler flags, see `mk/warnings.mk`.
+
+# Add $(GhcLib(Extra)HcOpts) to all package builds
$(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
+$(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts)))
-# Add $(GhcBootLibHcOpts) to all stage0 package builds
+# Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds
$(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
+$(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts)))
# -----------------------------------------------------------------------------
# Bootstrapping libraries
ifneq "$(BOOTSTRAPPING_CONF)" ""
ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
-$(shell echo "[]" >$(BOOTSTRAPPING_CONF))
+$(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF))
endif
endif
# lost).
fixed_pkg_prev=
$(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
+# ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is
+# this really true?), depends on several boot packages (e.g. Cabal and
+# ghc-boot). They need to be configured before ghc-pkg, so we add a
+# dependency between their package-data.mk files. See also Note
+# [Dependencies between package-data.mk files].
utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
compiler/stage1/package-data.mk: $(fixed_pkg_prev)
endif
# Installation
install: install_libs install_packages install_libexecs \
- install_bins install_topdirs
+ install_bins install_libexec_scripts
ifeq "$(HADDOCK_DOCS)" "YES"
install: install_docs
endif
define installLibsTo
# $1 = libraries to install
# $2 = directory to install to
- $(call INSTALL_DIR,$2)
+#
+# The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because
+# on Win64, "install -s" calls a strip that doesn't understand 64bit binaries.
+# For some reason, this means the DLLs end up non-executable, which means
+# executables that use them just segfault.
+ $(INSTALL_DIR) $2
for i in $1; do \
case $$i in \
*.a) \
- $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
$(RANLIB_CMD) $2/`basename $$i` ;; \
*.dll) \
- $(call INSTALL_PROGRAM,$(INSTALL_OPTS),$$i,$2) ; \
+ $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \
$(STRIP_CMD) $2/`basename $$i` ;; \
*.so) \
- $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2) ;; \
+ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \
*.dylib) \
- $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,$2);; \
+ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \
*) \
- $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,$2); \
+ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
esac; \
done
endef
-install_bins: $(INSTALL_BINS)
- $(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
+install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS)
+ $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
for i in $(INSTALL_BINS); do \
- $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ; \
+ $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
+ done
+ifneq "$(INSTALL_SCRIPTS)" ""
+ for i in $(INSTALL_SCRIPTS); do \
+ $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
done
+endif
install_libs: $(INSTALL_LIBS)
$(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
install_libexecs: $(INSTALL_LIBEXECS)
-ifeq "$(INSTALL_LIBEXECS)" ""
- @:
-else
- $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)/bin")
+ifneq "$(INSTALL_LIBEXECS)" ""
+ $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
for i in $(INSTALL_LIBEXECS); do \
- $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)/bin"); \
+ $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
done
# We rename ghc-stage2, so that the right program name is used in error
# messages etc.
+ifeq "$(Windows_Host)" "NO"
"$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
endif
+endif
-install_topdirs: $(INSTALL_TOPDIRS)
- $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
- for i in $(INSTALL_TOPDIRS); do \
- $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
+install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
+ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
+ $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
+ for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
+ $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
done
+endif
install_docs: $(INSTALL_DOCS)
- $(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
+ $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
ifneq "$(INSTALL_DOCS)" ""
for i in $(INSTALL_DOCS); do \
- $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
+ $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
done
endif
- $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
- $(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
+ $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html"
+ $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
ifneq "$(INSTALL_LIBRARY_DOCS)" ""
- $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
+ $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries"
for i in $(INSTALL_LIBRARY_DOCS); do \
- $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
+ $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
done
- $(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
- $(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
+ $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
+ $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
endif
ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
for i in $(INSTALL_HTML_DOC_DIRS); do \
- $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
- $(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
+ $(CP) -Rp $$i "$(DESTDIR)$(docdir)/html"; \
done
endif
# Now we can do the installation
install_packages: install_libexecs
install_packages: rts/dist/package.conf.install
- $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
+ $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
$(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
- $(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
- $(call INSTALL_DIR,"$(DESTDIR)$(topdir)/rts-1.0")
- $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts-1.0")
- $(foreach p, $(INSTALL_DYNLIBS), \
- $(call installLibsTo, $(wildcard $p/dist-install/build/*.so $p/dist-install/build/*.dll $p/dist-install/build/*.dylib), "$(DESTDIR)$(topdir)/$($p_PACKAGE)-$($p_dist-install_VERSION)"))
+ $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
+ $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts"
+ $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts")
$(foreach p, $(INSTALL_PACKAGES), \
$(call make-command, \
"$(ghc-cabal_INPLACE)" copy \
# This rule seems to hold some files open on Windows which prevents
# cleaning, perhaps due to the $(wildcard).
-$(eval $(call bindist,.,\
+$(eval $(call bindist-list,.,\
LICENSE \
README \
INSTALL \
mk/config.mk.in \
$(INPLACE_BIN)/mkdirhier \
utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
- utils/ghc-pwd/dist-install/build/tmp/ghc-pwd \
$(BINDIST_WRAPPERS) \
$(BINDIST_PERL_SOURCES) \
$(BINDIST_LIBS) \
$(libffi_HEADERS) \
$(INSTALL_LIBEXECS) \
$(INSTALL_LIBEXEC_SCRIPTS) \
- $(INSTALL_TOPDIRS) \
$(INSTALL_BINS) \
+ $(INSTALL_SCRIPTS) \
$(INSTALL_MANPAGES) \
$(INSTALL_DOCS) \
$(INSTALL_LIBRARY_DOCS) \
$(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
docs/index.html \
- compiler/stage2/doc \
+ $(wildcard compiler/stage2/doc) \
$(wildcard libraries/*/dist-install/doc/) \
$(wildcard libraries/*/*/dist-install/doc/) \
$(filter-out settings,$(INSTALL_LIBS)) \
unix-binary-dist-prep:
$(call removeTrees,bindistprep/)
"$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
- set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
+ set -e; for i in packages LICENSE compiler ghc iserv rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
- echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
- echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
- echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
+ echo "BUILD_SPHINX_HTML = $(BUILD_SPHINX_HTML)" >> $(BIN_DIST_MK)
+ echo "BUILD_SPHINX_PDF = $(BUILD_SPHINX_PDF)" >> $(BIN_DIST_MK)
echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK)
$(call removeFiles,$(BIN_DIST_PREP_TAR))
# h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
# tree then we want to include the real file, not a symlink to it
- cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
+ cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
windows-binary-dist-prep:
$(call removeTrees,bindistprep/)
$(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
- cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
+ cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
# tryTimes tries to run its third argument multiple times, until it
# succeeds. Don't call it directly; call try10Times instead.
.PHONY: publish-binary-dist
publish-binary-dist:
- $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
+ $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist)
ifeq "$(mingw32_TARGET_OS)" "1"
DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
# Do it like this:
#
-# $ make
+# $ ./boot
+# $ ./configure
# $ make sdist
#
-# A source dist is built from a complete build tree, because we
+# A source dist is built from a (partial) build tree, because we
# require some extra files not contained in a git checkout: the
# output from Happy and Alex, for example.
#
-# The steps performed by 'make dist' are as follows:
+# The steps performed by 'make sdist' are as follows:
+# - build those extra files
# - create a complete link-tree of the current build tree in /tmp
# - run 'make distclean' on that tree
# - remove a bunch of other files that we know shouldn't be in the dist
-# - tar up first the extralibs package, then the main source package
#
# Directory in which we're going to build the src dist
SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
-SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.bz2
+SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT)
SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src
SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs
SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
-SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.bz2
+SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT)
SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
-SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.bz2
+SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT)
#
# Files to include in source distributions
#
SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
- utils docs rts compiler ghc driver libraries libffi-tarballs
+ utils docs rts compiler ghc driver libraries libffi-tarballs iserv
SRC_DIST_GHC_FILES += \
configure.ac config.guess config.sub configure \
- aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
- settings.in VERSION \
- boot packages ghc.mk
-
-VERSION :
- echo $(ProjectVersion) >VERSION
-
-sdist : VERSION
-
-# Use:
-# $(call sdist_ghc_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
-# to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
-# "stage2" is the dist dir.
-define sdist_ghc_file
- "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_GHC_DIR)/$1/$3/$4
- mv $(SRC_DIST_GHC_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_GHC_DIR)/$1/$3/$4/$5.$6.source
-endef
-
-.PHONY: sdist-ghc-prep
-sdist-ghc-prep :
+ aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \
+ install-sh settings.in VERSION GIT_COMMIT_ID \
+ boot packages ghc.mk MAKEHELP.md
+
+.PHONY: VERSION
+VERSION:
+ @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \
+ then echo "$@ needs no update"; \
+ else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi
+
+.PHONY: GIT_COMMIT_ID
+GIT_COMMIT_ID:
+ @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \
+ echo "******************************************************************************"; \
+ echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \
+ echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \
+ echo "Please re-run './configure' before creating source-distribution"; \
+ echo "******************************************************************************"; \
+ exit 1; \
+ fi
+ @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \
+ then echo "$@ needs no update"; \
+ else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi
+
+sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID
+
+# Extra packages which shouldn't be in the source distribution: see #8801
+EXTRA_PACKAGES=parallel stm random primitive vector dph
+
+.PHONY: sdist-ghc-prep-tree
+sdist-ghc-prep-tree :
$(call removeTrees,$(SRC_DIST_GHC_ROOT))
$(call removeFiles,$(SRC_DIST_GHC_TARBALL))
- -mkdir $(SRC_DIST_ROOT)
- mkdir $(SRC_DIST_GHC_ROOT)
- mkdir $(SRC_DIST_GHC_DIR)
- cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
+ mkdir -p $(SRC_DIST_ROOT)
+ mkdir -p $(SRC_DIST_GHC_ROOT)
+ mkdir -p $(SRC_DIST_GHC_DIR)
+ cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done
cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
$(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
$(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
$(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
$(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
- $(call sdist_ghc_file,compiler,stage2,cmm,,CmmLex,x)
- $(call sdist_ghc_file,compiler,stage2,cmm,,CmmParse,y)
- $(call sdist_ghc_file,compiler,stage2,parser,,Lexer,x)
- $(call sdist_ghc_file,compiler,stage2,parser,,Parser,y.pp)
- $(call sdist_ghc_file,compiler,stage2,parser,,ParserCore,y)
- $(call sdist_ghc_file,utils/hpc,dist-install,,,HpcParser,y)
- $(call sdist_ghc_file,utils/genprimopcode,dist,,,Lexer,x)
- $(call sdist_ghc_file,utils/genprimopcode,dist,,,Parser,y)
+ for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done
cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
+# Add files generated by alex and happy.
+# These rules depend on sdist-ghc-prep-tree.
+$(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x))
+$(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y))
+$(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x))
+$(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y))
+$(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y))
+$(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x))
+$(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y))
+
+.PHONY: sdist-ghc-prep
+sdist-ghc-prep : sdist-ghc-prep-tree
+
.PHONY: sdist-windows-tarballs-prep
sdist-windows-tarballs-prep :
$(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT))
$(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL))
- -mkdir $(SRC_DIST_ROOT)
- mkdir $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
- mkdir $(SRC_DIST_WINDOWS_TARBALLS_DIR)
- mkdir $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
+ mkdir -p $(SRC_DIST_ROOT)
+ mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
+ mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)
+ mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs
$(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git)
sdist-testsuite-prep :
$(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
$(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
- -mkdir $(SRC_DIST_ROOT)
- mkdir $(SRC_DIST_TESTSUITE_ROOT)
- mkdir $(SRC_DIST_TESTSUITE_DIR)
- mkdir $(SRC_DIST_TESTSUITE_DIR)/testsuite
+ mkdir -p $(SRC_DIST_ROOT)
+ mkdir -p $(SRC_DIST_TESTSUITE_ROOT)
+ mkdir -p $(SRC_DIST_TESTSUITE_DIR)
+ mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite
cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
+ cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean
.PHONY: sdist-ghc
sdist-ghc: sdist-ghc-prep
- cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | bzip2 > $(TOP)/$(SRC_DIST_GHC_TARBALL)
+ cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL)
.PHONY: sdist-windows-tarballs
sdist-windows-tarballs: sdist-windows-tarballs-prep
- cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | bzip2 > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
+ cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
.PHONY: sdist-testsuite
sdist-testsuite: sdist-testsuite-prep
- cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | bzip2 > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
+ cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
.PHONY: sdist
.PHONY: clean
-CLEAN_FILES += libraries/bootstrapping.conf
-CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
+CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h
+CLEAN_FILES += libraries/base/include/EventConfig.h
+CLEAN_FILES += mk/config.mk.old
+CLEAN_FILES += mk/project.mk.old
+CLEAN_FILES += compiler/ghc.cabal.old
# These are no longer generated, but we still clean them for a while
# as they may still be in old GHC trees:
CLEAN_FILES += includes/DerivedConstants.h
CLEAN_FILES += includes/ghcautoconf.h
CLEAN_FILES += includes/ghcplatform.h
+CLEAN_FILES += includes/ghcversion.h
CLEAN_FILES += utils/ghc-pkg/Version.hs
-CLEAN_FILES += compiler/parser/Parser.y
CLEAN_FILES += compiler/prelude/primops.txt
CLEAN_FILES += $(wildcard compiler/primop*incl)
.PHONY: clean_files
clean_files :
$(call removeFiles,$(CLEAN_FILES))
+# this is here since CLEAN_FILES can't handle folders
+ $(call removeTrees,includes/dist-derivedconstants)
+ $(call removeTrees,inplace/bin)
+ $(call removeTrees,inplace/lib)
+ $(call removeTrees,libraries/bootstrapping.conf)
.PHONY: clean_libraries
clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
$(call removeFiles,mk/project.mk)
$(call removeFiles,compiler/ghc.cabal)
$(call removeFiles,ghc/ghc-bin.cabal)
+ $(call removeFiles,libraries/ghci/ghci.cabal)
$(call removeFiles,utils/runghc/runghc.cabal)
$(call removeFiles,settings)
$(call removeFiles,docs/users_guide/ug-book.xml)
$(call removeFiles,docs/users_guide/ug-ent.xml)
+ $(call removeFiles,docs/users_guide/ghc_config.py)
$(call removeFiles,docs/index.html)
$(call removeFiles,libraries/prologue.txt)
$(call removeFiles,distrib/configure.ac)
+ $(call removeFiles,ch01.html ch02.html index.html)
# ./configure also makes these.
$(call removeFiles,mk/config.h)
# Internal files generated by ./configure for itself.
$(call removeFiles,config.cache config.status config.log)
-# ./configure build ghc-pwd in utils/ghc-pwd/dist-boot, so clean it up.
- $(call removeTrees,utils/ghc-pwd/dist-boot)
-
# The root Makefile makes .old versions of some files that configure
# generates, so we clean those too.
$(call removeFiles,mk/config.mk.old)
$(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
$(call removeFiles,libraries/process/include/HsProcessConfig.h)
$(call removeFiles,libraries/unix/include/HsUnixConfig.h)
- $(call removeFiles,libraries/time/include/HsTimeConfig.h)
- $(call removeFiles,libraries/old-time/include/HsTimeConfig.h)
+ $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h)
# The library configure scripts also like creating autom4te.cache
# directories, so clean them all up.
# Not sure why this is being cleaned here.
$(call removeTrees,includes/dist-derivedconstants)
-# Finally, clean the inplace tree.
- $(call removeTrees,inplace)
+# Also clean Windows-only inplace directories.
+# Don't delete 'inplace' itself, it contains source files.
+ $(call removeTrees,inplace/mingw)
+ $(call removeTrees,inplace/perl)
maintainer-clean : distclean
$(call removeFiles,configure mk/config.h.in)
$(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
$(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
$(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
- $(call removeFiles,libraries/time/include/HsTimeConfig.h.in)
- $(call removeFiles,libraries/old-time/include/HsTimeConfig.h.in)
+ $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in)
.PHONY: all_libraries
.PHONY: bootstrapping-files
+# See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting
bootstrapping-files: $(includes_H_CONFIG)
bootstrapping-files: $(includes_DERIVEDCONSTANTS)
bootstrapping-files: $(includes_GHCCONSTANTS)
cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)"
cd libraries/xhtml && ./Setup build --builddir=dist-bindist
ifeq "$(HADDOCK_DOCS)" "YES"
- cd libraries/xhtml && ./Setup haddock --builddir=dist-bindist
+ cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
endif
cd libraries/xhtml && ./Setup install --builddir=dist-bindist
cd libraries/xhtml && ./Setup clean --builddir=dist-bindist
cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
+# Note [No stage2 packages when CrossCompiling or Stage1Only]
+#
+# (first read Note [CrossCompiling vs Stage1Only] and
+# Note [Stage1Only vs stage=1] in mk/config.mk.in)
+#
+# When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the
+# following packages from the build:
+# * packages that we build with ghc-stage2 [1]
+# * packages that depend on the ghc library [2]
+#
+# Here's why:
+# - first of all, ghc-stage1 can't use stage0's ghc library (it's too old)
+# - neither do we register the ghc library (compiler/stage1) that we build
+# with stage0. TODO Why not? We do build it...
+# - as a result, we need to a) use ghc-stage2 to build packages that depend on
+# the ghc library (e.g. ghctags [4] and mkUserGuidePart) and b) exclude
+# those packages when ghc-stage2 is not available.
+# - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just
+# said we didn't want it), so we have to exclude the stage2 packages from
+# the build. This includes the case where Stage1Only=YES is combined with
+# CrossCompiling=YES (Building GHC as a cross-compiler [3]).
+# - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself
+# [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't
+# run on the host platform at all; it is built to run on $(TARGETPLATFORM)"
+# [5]. Therefore in this case we also have to exclude the stage2 packages
+# from the build.
+#
+# [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2'
+#
+# [2]
+# find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)'
+#
+# [3] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
+#
+# [4] 5fb72555f7b7ab67a33583f33ad9160761ca434f
+# "ghctags needs the stage2 compiler, since it uses the GHC API."
+#
+# [5] * bc31dbe8ee22819054df60f5ef219fed393a1c54
+# "Disable any packages built with stage 2 when cross-compiling
+# Since we can't run stage 2 on the host."
+#
+# * 72995160b0b190577b5c0cb8d7bd0426cc455b05
+# "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)"
+
# -----------------------------------------------------------------------------
# Numbered phase targets
.PHONY: phase_1_builds
phase_1_builds: $(PACKAGE_DATA_MKS)
-
git.haskell.org / ghc.git / blobdiff