f5b170661add13f3039a856ffdc449b761089851
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
42 # installer package
43 #
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
47 #
48 # hc-file-bundle
49 # Builds an HC-file bundle, for bootstrapping
50 #
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
53 #
54 ############################################################################
55
56 TOP=.
57 include $(TOP)/mk/boilerplate.mk
58
59 #
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
62 #
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
65 #
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
67
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = includes rts compiler ghc docs utils driver
71 else
72 SUBDIRS_BUILD = includes utils driver docs compiler ghc rts libraries/Cabal/doc
73 endif
74
75 SUBDIRS = gmp libffi includes utils driver docs rts compiler ghc libraries libraries/Cabal/doc
76
77 check-all: check-tools check-packages
78
79 check-tools:
80 @:
81 ifeq "$(HADDOCK_DOCS)" "YES"
82 ifeq "$(HADDOCK)" ""
83 echo "Couldn't find haddock" >&2
84 exit 1
85 endif
86 endif
87
88 # Sanity check that all the boot libraries are in the tree, to catch
89 # failure to run darcs-all.
90 check-packages :
91 @ds=`cat libraries/boot-packages`;\
92 for d in $$ds; do \
93 if test ! -d libraries/$$d; then \
94 echo "Looks like you're missing libraries/$$d,"; \
95 echo "maybe you haven't done './darcs-all get'?"; \
96 exit 1; \
97 fi \
98 done
99 @if test ! -f libraries/base/configure; then \
100 echo "Looks like you're missing base's configure script."; \
101 echo "Did you run 'sh boot' at the top level?"; \
102 exit 1; \
103 fi
104
105 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
106 ifneq "$(WhatGccIsCalled)" ""
107 GCC_LIB_DEP = stamp.inplace-gcc-lib
108 endif
109 endif
110
111 stage1 : $(GCC_LIB_DEP) check-all
112 $(MAKE) -C libraries boot
113 $(MAKE) -C gmp all
114 $(MAKE) -C libffi all
115 $(MAKE) -C utils/mkdependC boot
116 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
117 for i in $(SUBDIRS_BUILD); do \
118 echo "------------------------------------------------------------------------"; \
119 echo "== $(MAKE) boot $(MFLAGS);"; \
120 echo " in $(shell pwd)/$$i"; \
121 echo "------------------------------------------------------------------------"; \
122 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
123 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
124 done; \
125 for i in $(SUBDIRS_BUILD); do \
126 echo "------------------------------------------------------------------------"; \
127 echo "== $(MAKE) all $(MFLAGS);"; \
128 echo " in $(shell pwd)/$$i"; \
129 echo "------------------------------------------------------------------------"; \
130 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
131 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
132 done
133 $(MAKE) -C libraries all
134
135 # When making distributions (i.e., whether with binary-dist or using the
136 # vanilla install target to create an installer package), we can have problems
137 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
138 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
139 # an example. Thus, we explicitly build a second version with the stage 1
140 # compiler of all utils that get installed and of all extra support binaries
141 # includes in binary dists.
142 stage2 : check-all
143 $(MAKE) -C compiler boot stage=2
144 $(MAKE) -C compiler stage=2
145 $(MAKE) -C ghc stage=2
146
147
148 stage3 : check-all
149 $(MAKE) -C compiler boot stage=3
150 $(MAKE) -C compiler stage=3
151
152 bootstrap : bootstrap2
153
154 bootstrap2 : stage1
155 $(MAKE) stage2
156
157 bootstrap3 : bootstrap2
158 $(MAKE) stage3
159
160 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
161 ifneq "$(WhatGccIsCalled)" ""
162 all :: stamp.inplace-gcc-lib
163
164 .PHONY: stamp.inplace-gcc-lib
165
166 # This is a hack to make Cabal able to find ld when we run tests with
167 # the inplace ghc. We should probably install all the gcc stuff in our
168 # tree somewhere, and then have install copy it from there rather than
169 # from the filesystem.
170 stamp.inplace-gcc-lib:
171 $(RM) -r compiler/gcc-lib
172 mkdir compiler/gcc-lib
173 cp $(LD) compiler/gcc-lib
174 touch $@
175
176 clean ::
177 $(RM) -r compiler/gcc-lib
178 $(RM) -f inplace-gcc-lib
179 endif
180 endif
181
182 all :: bootstrap
183
184 # -----------------------------------------------------------------------------
185 # Installing
186
187 # We want to install the stage 2 bootstrapped compiler by default, but we let
188 # the user override this by saying 'make install stage=1', for example.
189 ifeq "$(stage)" ""
190 INSTALL_STAGE = stage=2
191 else
192 INSTALL_STAGE =
193 endif
194
195 install-strip:
196 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
197
198 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
199 install :: check-packages
200 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
201 for i in $(SUBDIRS); do \
202 echo "------------------------------------------------------------------------"; \
203 echo "== $(MAKE) $@ $(MFLAGS);"; \
204 echo " in $(shell pwd)/$$i"; \
205 echo "------------------------------------------------------------------------"; \
206 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
207 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
208 done
209
210 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
211 # These files need to be in the InstallShield
212 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
213 # in the top-level directory of the distribution
214 INSTALL_DATAS += ANNOUNCE LICENSE README
215 endif
216
217 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
218 # and the perl interpreter and dll into the GHC prefix directory.
219 # Gcc and Perl source locations derived from configuration data.
220 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
221 ifneq "$(WhatGccIsCalled)" ""
222 install ::
223 -mkdir $(prefix)/gcc-lib
224 -mkdir $(prefix)/include
225 -mkdir $(prefix)/include/mingw
226 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
227 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
228 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
229 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
230 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
231 -cp $(GccDir)gcc.exe $(prefix)
232 -cp $(GccDir)as.exe $(prefix)/gcc-lib
233 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
234 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
235 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
236 -cp $(GhcDir)../perl.exe $(prefix)
237 -cp $(GhcDir)../perl56.dll $(prefix)
238 endif
239 endif
240
241 # Install gcc-extra-opts
242 install ::
243 $(INSTALL_DIR) $(DESTDIR)$(libdir)
244 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
245
246 install-docs ::
247 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
248 for i in $(SUBDIRS); do \
249 echo "------------------------------------------------------------------------"; \
250 echo "== $(MAKE) $@ $(MFLAGS);"; \
251 echo " in $(shell pwd)/$$i"; \
252 echo "------------------------------------------------------------------------"; \
253 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
254 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
255 done
256
257 # -----------------------------------------------------------------------------
258 # Making a binary distribution
259 #
260 # `dist' `binary-dist'
261 # Create a distribution tar file for this program. The tar file
262 # should be set up so that the file names in the tar file start with
263 # a subdirectory name which is the name of the package it is a
264 # distribution for. This name can include the version number.
265 #
266 # For example, the distribution tar file of GCC version 1.40 unpacks
267 # into a subdirectory named `gcc-1.40'.
268 #
269 # The easiest way to do this is to create a subdirectory
270 # appropriately named, use ln or cp to install the proper files in
271 # it, and then tar that subdirectory.
272 #
273 # The dist target should explicitly depend on all non-source files
274 # that are in the distribution, to make sure they are up to date in
275 # the distribution. See Making Releases.
276 #
277 # binary-dist is a GHC addition for binary distributions
278 #
279
280 binary-dist::
281 -rm -rf $(BIN_DIST_DIR)
282 -$(RM) $(BIN_DIST_TARBALL)
283
284 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
285
286 binary-dist::
287 $(MAKE) prefix=$(BIN_DIST_DIR) install
288 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
289
290 binary-dist::
291 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
292
293 binary-dist::
294 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
295 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
296
297 else
298
299 BinDistDirs = includes compiler docs rts
300
301 BIN_DIST_TOP= distrib/Makefile \
302 distrib/configure-bin.ac \
303 distrib/INSTALL \
304 distrib/README \
305 ANNOUNCE \
306 LICENSE \
307 install-sh \
308 extra-gcc-opts.in \
309 config.guess \
310 config.sub \
311 aclocal.m4
312
313 ifeq "$(darwin_TARGET_OS)" "1"
314 BIN_DIST_TOP+=mk/fix_install_names.sh
315 endif
316
317 .PHONY: binary-dist-pre% binary-dist
318
319 binary-dist:: binary-dist-pre
320
321 binary-dist-pre::
322 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
323 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
324 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
325 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
326 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
327 cp mk/package.mk $(BIN_DIST_DIR)/mk/
328 cp mk/install.mk $(BIN_DIST_DIR)/mk/
329 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
330 cp mk/fptools.css $(BIN_DIST_DIR)/mk/
331 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
332 $(MKDIRHIER) $(BIN_DIST_DIR)/share
333
334 binary-dist::
335 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
336 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
337 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
338 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
339 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
340 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
341 $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
342 $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
343 $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
344
345 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
346
347 binary-dist::
348 @for i in $(BIN_DIST_TOP); do \
349 if test -f "$$i"; then \
350 echo cp $$i $(BIN_DIST_DIR); \
351 cp $$i $(BIN_DIST_DIR); \
352 fi; \
353 done;
354 @echo "Configuring the Makefile for this project..."
355 echo > $(VARFILE)
356 echo "package = ghc" >> $(VARFILE)
357 echo "version = $(ProjectVersion)" >> $(VARFILE)
358 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
359 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
360 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
361 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
362 echo "GhcHasEditline = $(GhcHasEditline)" >> $(VARFILE)
363 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
364 echo "XMLDocWays = $(XMLDocWays)" >> $(VARFILE)
365 # We won't actually use xsltproc, but we need to know if it's "" or not
366 echo "XSLTPROC = $(XSLTPROC)" >> $(VARFILE)
367 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(VARFILE)
368 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(VARFILE)
369
370 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
371 @echo "Generating a shippable configure script.."
372 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
373 ( cd $(BIN_DIST_DIR); autoreconf )
374 endif
375
376 # Tar up the distribution and build a manifest
377 binary-dist :: tar-binary-dist
378
379 .PHONY: tar-binary-dist
380 tar-binary-dist:
381 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
382 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
383
384 PUBLISH_FILES = $(BIN_DIST_TARBALL)
385
386 # Upload the distribution and documentation
387 ifneq "$(ISCC)" ""
388 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
389 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
390
391 PUBLISH_FILES += $(WINDOWS_INSTALLER)
392
393 binary-dist :: generate-windows-installer
394
395 .PHONY: generate-windows-installer
396 generate-windows-installer ::
397 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
398 endif
399
400 # Upload the distribution and documentation
401 ifneq "$(PublishLocation)" ""
402 publish ::
403 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
404 endif
405
406 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
407
408 .PHONY: publish-binary-dist
409 publish-binary-dist ::
410 @for f in $(PUBLISH_FILES); \
411 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
412 done
413
414 # You need to "make binddisttest" before publishing the docs, as it
415 # works by publish setting $(prefix) to inside the binddisttest
416 # directory so $(docdir) points to the right place.
417
418 # We assume that Windows means Cygwin, as we can't just use docdir
419 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
420 # the machine c.
421
422 ifeq "$(Windows)" "YES"
423 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
424 else
425 PUBLISH_DOCDIR = $(docdir)
426 endif
427
428 publish-binary-dist ::
429 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
430
431 binary-dist::
432 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
433
434 # -----------------------------------------------------------------------------
435 # Building MacOS installer packages
436 #
437 # 'framework-pkg'
438 # Create an installer package for /Library/Frameworks/GHC.framework
439 #
440 # 'framework-binary-dist'
441 # Create an installer package for GHC.framework encapsulating a
442 # binary-dist to make it relocatable
443 # FIXME: This is only partially implemented so far
444
445 ifeq "$(darwin_TARGET_OS)" "1"
446
447 .PHONY: framework-pkg, framework-binary-dist
448
449 framework-pkg:
450 $(MAKE) -C distrib/MacOS framework-pkg
451
452 framework-binary-dist:
453 $(MAKE) -C distrib/MacOS framework-binary-dist
454
455 endif
456
457 # -----------------------------------------------------------------------------
458 # Building source distributions
459 #
460 # Do it like this:
461 #
462 # $ make
463 # $ make dist
464 #
465 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
466 #
467
468 .PHONY: dist
469
470 #
471 # Directory in which we're going to build the src dist
472 #
473 SRC_DIST_NAME=ghc-$(ProjectVersion)
474 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
475
476 #
477 # Files to include in source distributions
478 #
479 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
480 SRC_DIST_FILES += \
481 configure.ac config.guess config.sub configure \
482 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
483 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
484
485 # -----------------------------------------------------------------------------
486 # Source distributions
487
488 # A source dist is built from a complete build tree, because we
489 # require some extra files not contained in a darcs checkout: the
490 # output from Happy and Alex, for example.
491 #
492 # The steps performed by 'make dist' are as follows:
493 # - create a complete link-tree of the current build tree in /tmp
494 # - run 'make distclean' on that tree
495 # - remove a bunch of other files that we know shouldn't be in the dist
496 # - tar up first the extralibs package, then the main source package
497
498 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
499
500 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
501 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
502
503 VERSION :
504 echo $(ProjectVersion) >VERSION
505
506 dist :: VERSION
507
508 dist ::
509 $(RM) -rf $(SRC_DIST_DIR)
510 $(RM) $(SRC_DIST_NAME).tar.gz
511 mkdir $(SRC_DIST_DIR)
512 ( cd $(SRC_DIST_DIR) \
513 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
514 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
515 && $(MAKE) distclean \
516 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
517 && $(RM) -rf compiler/stage[123] mk/build.mk \
518 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
519 )
520 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
521 $(RM) -rf $(EXTRA_LIBS)
522 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
523
524 # Upload the distribution(s)
525 # Retrying is to work around buggy firewalls that corrupt large file transfers
526 # over SSH.
527 ifneq "$(PublishLocation)" ""
528 dist ::
529 @for i in 0 1 2 3 4 5 6 7 8 9; do \
530 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
531 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
532 done
533 @for i in 0 1 2 3 4 5 6 7 8 9; do \
534 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
535 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
536 done
537 endif
538
539 # -----------------------------------------------------------------------------
540 # HC file bundles
541
542 hc-file-bundle :
543 $(RM) -r ghc-$(ProjectVersion)
544 $(LN_S) . ghc-$(ProjectVersion)
545 $(FIND) ghc-$(ProjectVersion)/compiler \
546 ghc-$(ProjectVersion)/utils \
547 ghc-$(ProjectVersion)/libraries -follow \
548 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
549 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
550 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
551 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
552 fi; \
553 done;
554 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
555 if test "x$$f" != "x"; then \
556 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
557 fi; \
558 done;
559 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
560 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
561 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
562 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
563 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
564 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
565
566 # -----------------------------------------------------------------------------
567 # Cleaning
568
569 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
570
571 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
572 docs/users_guide/ug-book.xml extra-gcc-opts
573
574 # don't clean config.mk: it's needed when cleaning stuff later on
575 LATE_DIST_CLEAN_FILES += mk/config.mk
576
577 # VERSION is shipped in a source dist
578 MAINTAINER_CLEAN_FILES += VERSION
579
580 extraclean::
581 $(RM) -rf autom4te.cache
582
583 clean distclean ::
584 $(MAKE) -C bindisttest $@
585 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
586
587 # -----------------------------------------------------------------------------
588
589 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
590 NO_BOOT_TARGET=YES
591 NO_ALL_TARGET=YES
592 NO_INSTALL_TARGET=YES
593
594 include $(TOP)/mk/target.mk
595
596 # -----------------------------------------------------------------------------
597