testsuite: Fix cabal01 test
[ghc.git] / ghc.mk
1 # -----------------------------------------------------------------------------
2 #
3 # (c) 2009-2013 The University of Glasgow
4 #
5 # This file is part of the GHC build system.
6 #
7 # To understand how the build system works and how to modify it, see
8 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
10 #
11 # -----------------------------------------------------------------------------
12
13 # ToDo List.
14 #
15 # * remove old Makefiles, add new stubs for building in subdirs
16 # * docs/Makefile
17 # * docs/storage-mgmt/Makefile
18 # * docs/vh/Makefile
19 # * rts/dotnet/Makefile
20 # * utils/Makefile
21 # * add Makefiles for the rest of the utils/ programs that aren't built
22 # by default (need to exclude them from 'make all' too)
23
24 # Possible cleanups:
25 #
26 # * per-source-file dependencies instead of one .depend file?
27 # * eliminate undefined variables, and use --warn-undefined-variables?
28 # * put outputs from different ways in different subdirs of distdir/build,
29 # then we don't have to use -osuf/-hisuf. We would have to install
30 # them in different places too, so we'd need ghc-pkg support for packages
31 # of different ways.
32 # * make PACKAGES_STAGE1 generated by './configure' or './boot'?
33 # * we should use a directory of package.conf files rather than a single
34 # file for the inplace package database, so that we can express
35 # dependencies more accurately. Otherwise it's possible to get into
36 # a state where the package database is out of date, and the build
37 # system doesn't know.
38
39 # Approximate build order.
40 #
41 # The actual build order is defined by dependencies, and the phase
42 # ordering used to ensure correct ordering of makefile-generation; see
43 # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
44 #
45 # * With bootstrapping compiler:
46 # o Build utils/ghc-cabal
47 # o Build utils/ghc-pkg
48 # o Build utils/hsc2hs
49 # o Build utils/genprimopcode
50 # o Build utils/deriveConstants
51 # * For each package:
52 # o configure, generate package-data.mk and inplace-pkg-config
53 # o register each package into inplace/lib/package.conf
54 # * build libffi (if not disabled by --with-system-libffi)
55 # * With bootstrapping compiler:
56 # o Build libraries/{filepath,hpc,Cabal}
57 # o Build compiler (stage 1)
58 # * With stage 1 compiler:
59 # o Build libraries/*
60 # o Build rts
61 # o Build utils/* (except haddock)
62 # o Build compiler (stage 2)
63 # * With stage 2 compiler:
64 # o Build utils/haddock
65 # o Build compiler (stage 3) (optional)
66 # * With haddock:
67 # o libraries/*
68 # o compiler
69
70 .PHONY: default all haddock
71
72 # We need second expansion for the way we handle directories, so that
73 # | $$$$(dir $$$$@)/.
74 # expands to the directory of a rule that uses a % pattern.
75 .SECONDEXPANSION:
76
77 default : all
78
79
80 ##################################################
81 # Check that we have a new enough 'make'
82
83 HAVE_EVAL := NO
84 $(eval HAVE_EVAL := YES)
85
86 ifeq "$(HAVE_EVAL)" "NO"
87 $(error Your make does not support eval. You need GNU make >= 3.81)
88 endif
89
90 ifeq "$(abspath /)" ""
91 $(error Your make does not support abspath. You need GNU make >= 3.81)
92 endif
93 ##################################################
94
95 # -----------------------------------------------------------------------------
96 # Catch make if it runs away into an infinite loop
97 ifeq "$(MAKE_RESTARTS)" ""
98 else ifeq "$(MAKE_RESTARTS)" "1"
99 else
100 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details)
101 endif
102
103 # -----------------------------------------------------------------------------
104 # Misc GNU make utils
105
106 nothing=
107 space=$(nothing) $(nothing)
108 comma=,
109
110 # -----------------------------------------------------------------------------
111 # Makefile debugging
112 #
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
115 #
116
117 show:
118 @echo '$(VALUE)="$($(VALUE))"'
119
120 # echo is used by the nightly builders to query the build system for
121 # information.
122 # Using printf means that we don't get a trailing newline. We escape
123 # backslashes and double quotes in the string to protect them from the
124 # shell, and percent signs to protect them from printf.
125 echo:
126 @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))"
127
128 # -----------------------------------------------------------------------------
129 # Include subsidiary build-system bits
130
131 include mk/tree.mk
132
133 ifneq "$(CLEANING)" "YES"
134 include mk/config.mk
135 ifeq "$(ProjectVersion)" ""
136 $(error Please run ./configure first)
137 endif
138 endif
139
140 include mk/ways.mk
141
142 # (Optional) build-specific configuration
143 include mk/custom-settings.mk
144
145 # The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append
146 # '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after
147 # mk/custom-settings.mk.
148 include mk/warnings.mk
149
150 # -----------------------------------------------------------------------------
151 # Check for inconsistent settings, after reading mk/build.mk.
152 # Although mk/config.mk should always contain consistent settings (set by
153 # configure), mk/build.mk can contain pretty much anything.
154
155 ifneq "$(CLEANING)" "YES"
156
157 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
158 ifeq "$(findstring dyn,$(GhcLibWays))" ""
159 $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES)
160 endif
161 else
162 ifeq "$(findstring v,$(GhcLibWays))" ""
163 $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES)
164 endif
165 endif
166
167 ifeq "$(GhcProfiled)" "YES"
168 ifeq "$(findstring p,$(GhcLibWays))" ""
169 $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES)
170 endif
171 endif
172
173 ifeq "$(BUILD_SPHINX_HTML)" "YES"
174 ifeq "$(SPHINXBUILD)" ""
175 $(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \
176 Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \
177 (when validating), or install `sphinx-build` and rerun `./configure`. \
178 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
179 endif
180 endif
181
182 ifeq "$(BUILD_SPHINX_PDF)" "YES"
183 ifeq "$(XELATEX)" ""
184 $(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \
185 Install `xelatex`, then rerun `./configure`. \
186 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
187 endif
188 endif
189
190 ifeq "$(HSCOLOUR_SRCS)" "YES"
191 ifeq "$(HSCOLOUR_CMD)" ""
192 $(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \
193 Run `cabal install hscolour`, then rerun `./configure`. \
194 See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation)
195 endif
196 endif
197
198 ifeq "$(HADDOCK_DOCS)" "YES"
199 ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
200 $(error Can not build haddock docs when CrossCompiling or Stage1Only. \
201 Set HADDOCK_DOCS=NO in your mk/build.mk file. \
202 See Note [No stage2 packages when CrossCompiling or Stage1Only])
203 endif
204 endif
205
206 ifneq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO"
207 # The User's Guide requires mkUserGuidePart, which uses the GHC API.
208 ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
209 $(error Can not build User's Guide when CrossCompiling or Stage1Only. \
210 Set BUILD_SPHINX_HTML=NO, BUILD_SPHINX_PDF=NO in your \
211 mk/build.mk file. \
212 See Note [No stage2 packages when CrossCompiling or Stage1Only])
213 endif
214 endif
215
216 endif # CLEANING
217
218 # -----------------------------------------------------------------------------
219
220 ifeq "$(phase)" ""
221 phase = final
222 endif
223
224 # -----------------------------------------------------------------------------
225 # Utility definitions
226
227 include rules/prof.mk
228 include rules/trace.mk
229 include rules/library-path.mk
230 include rules/add-dependency.mk
231 include rules/make-command.mk
232 include rules/pretty_commands.mk
233
234 # -----------------------------------------------------------------------------
235 # Macros for standard targets
236
237 include rules/all-target.mk
238 include rules/clean-target.mk
239
240 # -----------------------------------------------------------------------------
241 # The inplace tree
242
243 $(eval $(call clean-target,root,inplace,inplace/bin inplace/lib))
244
245 # -----------------------------------------------------------------------------
246 # Whether to build dependencies or not
247
248 # When we're just doing 'make clean' or 'make show', then we don't need
249 # to build dependencies.
250
251 ifeq "$(CLEANING)" "YES"
252 NO_INCLUDE_DEPS = YES
253 NO_INCLUDE_PKGDATA = YES
254 endif
255 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
256 NO_INCLUDE_DEPS = YES
257 NO_INCLUDE_PKGDATA = YES
258 endif
259 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
260 NO_INCLUDE_DEPS = YES
261 # We want package-data.mk for show
262 endif
263
264 # -----------------------------------------------------------------------------
265 # Ways
266
267 include rules/way-prelims.mk
268
269 $(foreach way,$(ALL_WAYS),\
270 $(eval $(call way-prelims,$(way))))
271
272 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
273 GHCI_WAY = dyn
274 HADDOCK_WAY = dyn
275 else
276 GHCI_WAY = v
277 HADDOCK_WAY = v
278 endif
279
280 WINDOWS_DYN_PROG_RTS := rts
281 ifeq "$(GhcThreaded)" "YES"
282 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr
283 endif
284 ifeq "$(GhcDebugged)" "YES"
285 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug
286 endif
287 WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE
288
289 # -----------------------------------------------------------------------------
290 # Compilation Flags
291
292 include rules/distdir-opts.mk
293 include rules/distdir-way-opts.mk
294
295 # -----------------------------------------------------------------------------
296 # Finding source files and object files
297
298 include rules/hs-sources.mk
299 include rules/c-sources.mk
300 include rules/includes-sources.mk
301 include rules/hs-objs.mk
302 include rules/c-objs.mk
303 include rules/cmm-objs.mk
304
305 # -----------------------------------------------------------------------------
306 # Suffix rules
307
308 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
309 # so we don't make any when cleaning.
310 ifneq "$(CLEANING)" "YES"
311 include rules/hs-suffix-rules-srcdir.mk
312 include rules/hs-suffix-way-rules-srcdir.mk
313 include rules/hs-suffix-way-rules.mk
314 include rules/hi-rule.mk
315 include rules/c-suffix-rules.mk
316 include rules/cmm-suffix-rules.mk
317 endif
318
319 # -----------------------------------------------------------------------------
320 # Building package-data.mk files from .cabal files
321
322 include rules/package-config.mk
323
324 # -----------------------------------------------------------------------------
325 # Building dependencies
326
327 include rules/dependencies.mk
328 include rules/build-dependencies.mk
329 include rules/include-dependencies.mk
330
331 # -----------------------------------------------------------------------------
332 # Build package-data.mk files
333
334 include rules/build-package-data.mk
335
336 # -----------------------------------------------------------------------------
337 # Build and install a program
338
339 include rules/build-prog.mk
340 include rules/shell-wrapper.mk
341
342 # -----------------------------------------------------------------------------
343 # Build a perl script
344
345 include rules/build-perl.mk
346
347 # -----------------------------------------------------------------------------
348 # Build a package
349
350 include rules/build-package.mk
351 include rules/build-package-way.mk
352 include rules/haddock.mk
353 include rules/tags-package.mk
354 include rules/foreachLibrary.mk
355
356 # -----------------------------------------------------------------------------
357 # Registering hand-written package descriptions (used in rts)
358
359 include rules/manual-package-config.mk
360
361 # -----------------------------------------------------------------------------
362 # Docs
363
364 include rules/sphinx.mk
365
366 # -----------------------------------------------------------------------------
367 # Making bindists and sdists
368
369 include rules/bindist.mk
370 include rules/sdist-ghc-file.mk
371
372 # -----------------------------------------------------------------------------
373 # Directories
374
375 # Don't try to delete directories:
376 .PRECIOUS: %/.
377
378 # Create build directories on demand. NB. the | below: this indicates
379 # that $(MKDIRHIER) is an order-only dependency, which means that this
380 # rule fires after building mkdirhier, but we won't try to recreate
381 # directories if mkdirhier changes.
382 %/. : | $(MKDIRHIER)
383 "$(MKDIRHIER)" $@
384
385 # -----------------------------------------------------------------------------
386 # Lax dependencies
387
388 ifeq "$(LAX_DEPENDENCIES)" "YES"
389 LAX_DEPS_FOLLOW = |
390 else
391 LAX_DEPS_FOLLOW =
392 endif
393
394 # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
395 # looking like
396 # target: a | b | c
397 # The first | signals the start of the order-only dependencies, but make
398 # treats the second | as a dependency. So we need to tell make how to
399 # build that dependency.
400
401 .PHONY: |
402 | :
403 @:
404
405 # -----------------------------------------------------------------------------
406 # Packages to build
407 # The lists of packages that we *actually* going to build in each stage:
408 #
409 # $(PACKAGES_STAGE0)
410 # $(PACKAGES_STAGE1)
411 # $(PACKAGES_STAGE2)
412 #
413 # Note that we need to add them to these variables in dependency
414 # order, as this is the order that they get configured in.
415
416 ifeq "$(CLEANING)" "YES"
417
418 define addLibraryForCleaning
419 # We just add all packages to both the stage 0 and stage 1 lists.
420 # Stage 2 gets cleaned in the same way as stage 1, so no need to
421 # add it there.
422 PACKAGES_STAGE0 += $1
423 PACKAGES_STAGE1 += $1
424 endef
425 $(eval $(call foreachLibrary,addLibraryForCleaning))
426
427 else # CLEANING
428
429 # Packages that are built by stage0. These packages are dependencies of
430 # programs such as GHC and ghc-pkg, that we do not assume the stage0
431 # compiler already has installed (or up-to-date enough).
432
433 PACKAGES_STAGE0 = binary Cabal/Cabal hpc ghc-boot-th ghc-boot hoopl transformers template-haskell ghci
434 ifeq "$(Windows_Host)" "NO"
435 PACKAGES_STAGE0 += terminfo
436 endif
437
438 PACKAGES_STAGE1 += ghc-prim
439 PACKAGES_STAGE1 += $(INTEGER_LIBRARY)
440 PACKAGES_STAGE1 += base
441 PACKAGES_STAGE1 += filepath
442 PACKAGES_STAGE1 += array
443 PACKAGES_STAGE1 += deepseq
444 PACKAGES_STAGE1 += bytestring
445 PACKAGES_STAGE1 += containers
446
447 ifeq "$(Windows_Target)" "YES"
448 PACKAGES_STAGE1 += Win32
449 endif
450 PACKAGES_STAGE1 += time
451 ifeq "$(Windows_Target)" "NO"
452 PACKAGES_STAGE1 += unix
453 endif
454
455 PACKAGES_STAGE1 += directory
456 PACKAGES_STAGE1 += process
457 PACKAGES_STAGE1 += hpc
458 PACKAGES_STAGE1 += pretty
459 PACKAGES_STAGE1 += binary
460 PACKAGES_STAGE1 += Cabal/Cabal
461 PACKAGES_STAGE1 += ghc-boot-th
462 PACKAGES_STAGE1 += ghc-boot
463 PACKAGES_STAGE1 += template-haskell
464 PACKAGES_STAGE1 += hoopl
465 PACKAGES_STAGE1 += transformers
466 PACKAGES_STAGE1 += ghc-compact
467
468 ifeq "$(HADDOCK_DOCS)" "YES"
469 PACKAGES_STAGE1 += xhtml
470 endif
471
472 ifeq "$(WITH_TERMINFO)" "YES"
473 PACKAGES_STAGE1 += terminfo
474 else
475 libraries/haskeline_CONFIGURE_OPTS += --flags=-terminfo
476 endif
477
478 PACKAGES_STAGE1 += haskeline
479 PACKAGES_STAGE1 += ghci
480
481 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
482 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
483 ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO"
484 define addExtraPackage
485 ifeq "$2" "-"
486 # Do nothing; this package is already handled above
487 else ifeq "$2" "dph"
488 ifeq "$$(BUILD_DPH) $$(GhcProfiled)" "YES NO"
489 # The DPH packages need TH, which is incompatible with a profiled GHC.
490 PACKAGES_STAGE2 += $1
491 endif
492 else ifeq "$2" "extra"
493 ifeq "$$(BUILD_EXTRA_PKGS)" "YES"
494 PACKAGES_STAGE2 += $1
495 endif
496 else
497 $$(error Unknown package tag: $2)
498 endif
499 endef
500 $(eval $(call foreachLibrary,addExtraPackage))
501 endif
502
503 # We install all packages that we build.
504 INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1))
505 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
506 ifneq "$(Stage1Only)" "YES"
507 INSTALL_PACKAGES += compiler
508 endif
509 INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2))
510
511 endif # CLEANING
512
513 # -------------------------------------------
514 # Note [Dependencies between package-data.mk files].
515
516 # We cannot run ghc-cabal to configure a package until we have
517 # configured and registered all of its dependencies. So the following
518 # hack forces all the configure steps to happen in exactly the following order:
519 #
520 # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
521 #
522 # Ideally we should use the correct dependencies here to allow more
523 # parallelism, but we don't know the dependencies until we've
524 # generated the package-data.mk files.
525 define fixed_pkg_dep
526 libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev)
527 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
528 endef
529
530 ifneq "$(BINDIST)" "YES"
531 fixed_pkg_prev=
532 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
533
534 # Intermezzo: utils that we build with the stage1 compiler. They depend on
535 # the stage1 packages, so we have to make sure those packages get configured
536 # and registered before we can start with these. Note that they don't depend on
537 # eachother, so we can configure them in parallel.
538 utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev)
539 utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev)
540 utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev)
541 utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev)
542 utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev)
543 utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev)
544 iserv/stage2/package-data.mk: $(fixed_pkg_prev)
545 iserv/stage2_p/package-data.mk: $(fixed_pkg_prev)
546 iserv/stage2_dyn/package-data.mk: $(fixed_pkg_prev)
547
548 # the GHC package doesn't live in libraries/, so we add its dependency manually:
549 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
550
551 # and continue with PACKAGES_STAGE2, which depend on GHC:
552 fixed_pkg_prev:=compiler/stage2/package-data.mk
553 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
554
555 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
556 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
557
558 # Utils that we build with the stage2 compiler.
559 # They depend on the ghc library and some other libraries, but depending on
560 # the ghc library's package-data.mk is sufficient, as that in turn depends on
561 # all the other libraries' package-data.mk files.
562 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
563 utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk
564 utils/check-api-annotations/dist-install/package-data.mk: compiler/stage2/package-data.mk
565 utils/check-ppr/dist-install/package-data.mk: compiler/stage2/package-data.mk
566 utils/mkUserGuidePart/dist/package-data.mk: compiler/stage2/package-data.mk
567
568 # add the final package.conf dependency: ghc-prim depends on RTS
569 libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace
570 endif
571
572 # --------------------------------
573 # Misc package-related settings
574
575 # Run Haddock for the packages that will be installed. We need to handle
576 # compiler specially due to the different dist directory name.
577 $(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES))
578 compiler_stage2_DO_HADDOCK = YES
579
580 BOOT_PKG_CONSTRAINTS := \
581 $(foreach d,$(PACKAGES_STAGE0),\
582 $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
583 --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
584
585 # The actual .a and .so/.dll files: needed for dependencies.
586 $(foreach way,$(GhcLibWays),$(eval ALL_STAGE1_$(way)_LIBS = $$(foreach lib,$$(PACKAGES_STAGE1),$$(libraries/$$(lib)_dist-install_$(way)_LIB))))
587
588 ALL_STAGE1_LIBS = $(ALL_STAGE1_v_LIBS)
589
590 ifeq "$(BuildSharedLibs)" "YES"
591 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
592 endif
593 BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
594
595 # Only build internal interpreter support for the stage2 ghci lib
596 libraries/ghci_dist-install_CONFIGURE_OPTS += --flags=ghci
597
598 # ----------------------------------------
599 # Special magic for the ghc-prim package
600
601 # We want the ghc-prim package to include the GHC.Prim module when it
602 # is registered, but not when it is built, because GHC.Prim is not a
603 # real source module, it is built-in to GHC. The old build system did
604 # this using Setup.hs, but we can't do that here, so we have a flag to
605 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
606 # remains compatible with the old build system for the time being).
607 # GHC.Prim module in the ghc-prim package with a flag:
608 #
609 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
610
611 # And then we strip it out again before building the package:
612 define libraries/ghc-prim_PACKAGE_MAGIC
613 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
614 endef
615
616 PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt
617
618 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/.
619 "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@
620
621 # Required so that Haddock documents the primops.
622 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
623
624 # ----------------------------------------
625 # Special magic for the integer package
626
627 ifneq "$(CLEANING)" "YES"
628 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
629 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp
630 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
631 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
632 else
633 $(error Unknown integer library: $(INTEGER_LIBRARY))
634 endif
635 endif
636
637 # -----------------------------------------------------------------------------
638 # Include build instructions from all subdirs
639 BUILD_DIRS += utils/mkdirhier
640 BUILD_DIRS += utils/touchy
641 BUILD_DIRS += utils/unlit
642 BUILD_DIRS += utils/hp2ps
643 BUILD_DIRS += driver/split
644 BUILD_DIRS += utils/genprimopcode
645 BUILD_DIRS += driver
646 BUILD_DIRS += driver/ghci
647 BUILD_DIRS += driver/ghc
648 BUILD_DIRS += driver/haddock
649 BUILD_DIRS += libffi
650 BUILD_DIRS += utils/deriveConstants
651 BUILD_DIRS += includes
652 BUILD_DIRS += rts
653 BUILD_DIRS += bindisttest
654 BUILD_DIRS += utils/genapply
655
656 # When cleaning, don't add any library packages to BUILD_DIRS. We include
657 # ghc.mk files for all BUILD_DIRS, but they don't exist until after running
658 # `./boot`. Running `make clean` before anything else, as well as running
659 # `make maintainer-clean` twice, should work.
660 ifneq "$(CLEANING)" "YES"
661 # These are deliberately in reverse order, so as to ensure that
662 # there is no need to have them in dependency order. That's important
663 # because it's tricky to ensure that they are in dependency order when
664 # cross-compiling, as some packages may only be in PACKAGES_STAGE0
665 # or PACKAGES_STAGE1.
666 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
667 BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
668 BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0)))
669 ifeq "$(BUILD_DPH)" "YES"
670 # Note: `$(eval $(call foreachLibrary,addExtraPackage))` above adds the
671 # packages listed in `libraries/dph/ghc-packages` (e.g. dph-base) to
672 # PACKAGES_STAGE2. But not 'libraries/dph' itself (it doesn't have a cabal
673 # file). Since it does have a ghc.mk file, we add it to BUILD_DIRS here.
674 BUILD_DIRS += $(wildcard libraries/dph)
675 endif
676 endif
677
678 BUILD_DIRS += libraries/integer-gmp/gmp
679 BUILD_DIRS += utils/haddock
680 BUILD_DIRS += utils/haddock/doc
681 BUILD_DIRS += compiler
682 BUILD_DIRS += utils/hsc2hs
683 BUILD_DIRS += utils/ghc-pkg
684 BUILD_DIRS += utils/testremove
685 BUILD_DIRS += utils/ghctags
686 BUILD_DIRS += utils/check-api-annotations
687 BUILD_DIRS += utils/check-ppr
688 BUILD_DIRS += utils/dll-split
689 BUILD_DIRS += utils/ghc-cabal
690 BUILD_DIRS += utils/hpc
691 BUILD_DIRS += utils/runghc
692 BUILD_DIRS += ghc
693 BUILD_DIRS += utils/mkUserGuidePart
694 BUILD_DIRS += docs/users_guide
695 BUILD_DIRS += utils/count_lines
696 BUILD_DIRS += utils/compare_sizes
697 BUILD_DIRS += iserv
698
699 # ----------------------------------------------
700 # Actually include the sub-ghc.mk's
701
702 ifeq "$(CLEANING)" "YES"
703 # Don't exclude any BUILD_DIRS when cleaning. When you for example build
704 # haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean'
705 # should still clean the haddock directory.
706 else # CLEANING
707 ifeq "$(BINDIST)" "YES"
708 BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS))
709 BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS))
710 BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS))
711 BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS))
712 BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
713 endif
714 ifeq "$(HADDOCK_DOCS)" "NO"
715 BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS))
716 BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS))
717 endif
718 ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO"
719 BUILD_DIRS := $(filter-out docs/users_guide,$(BUILD_DIRS))
720 # Don't to build this little utility if we're not building the User's Guide.
721 BUILD_DIRS := $(filter-out utils/mkUserGuidePart,$(BUILD_DIRS))
722 endif
723 ifeq "$(Windows_Host)" "NO"
724 BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS))
725 endif
726 ifeq "$(GhcUnregisterised)" "YES"
727 BUILD_DIRS := $(filter-out driver/split,$(BUILD_DIRS))
728 endif
729 ifeq "$(GhcWithInterpreter)" "NO"
730 # runghc is just GHCi in disguise
731 BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS))
732 endif
733 ifneq "$(INTEGER_LIBRARY)" "integer-gmp"
734 BUILD_DIRS := $(filter-out libraries/integer-gmp/gmp,$(BUILD_DIRS))
735 endif
736 ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO"
737 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
738 # See Note [Stage1Only vs stage=1] in mk/config.mk.in.
739 BUILD_DIRS := $(filter-out utils/ghctags,$(BUILD_DIRS))
740 BUILD_DIRS := $(filter-out utils/check-api-annotations,$(BUILD_DIRS))
741 BUILD_DIRS := $(filter-out utils/check-ppr,$(BUILD_DIRS))
742 endif
743 endif # CLEANING
744
745 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
746
747 # A useful pseudo-target (must be after the include above, because it needs
748 # the value of things like $(libraries/base_dist-install_v_LIB).
749 .PHONY: stage1_libs
750 stage1_libs : $(ALL_STAGE1_LIBS)
751
752 # We need this extra dependency when building our own libffi, because
753 # GHCi.FFI.hs #includes ffi.h
754 ifneq "$(UseSystemLibFFI)" "YES"
755 libraries/ghci/dist-install/build/GHCi/FFI.hs : $(libffi_HEADERS)
756 endif
757
758 # ----------------------------------------------
759 # Per-package compiler flags
760 #
761 # If you want to add per-package compiler flags, see `mk/warnings.mk`.
762
763 # Add $(GhcLib(Extra)HcOpts) to all package builds
764 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
765 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts)))
766
767 # Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds
768 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
769 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts)))
770
771 # -----------------------------------------------------------------------------
772 # Bootstrapping libraries
773
774 # We need to build a few libraries with the installed GHC, since GHC itself
775 # and some of the tools depend on them:
776
777 ifneq "$(BINDIST)" "YES"
778
779 ifneq "$(BOOTSTRAPPING_CONF)" ""
780 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
781 $(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF))
782 endif
783 endif
784
785 $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF)))
786
787 # register the boot packages in strict sequence, because running
788 # multiple ghc-pkgs in parallel doesn't work (registrations may get
789 # lost).
790 fixed_pkg_prev=
791 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
792 # ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is
793 # this really true?), depends on several boot packages (e.g. Cabal and
794 # ghc-boot). They need to be configured before ghc-pkg, so we add a
795 # dependency between their package-data.mk files. See also Note
796 # [Dependencies between package-data.mk files].
797 utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev)
798 compiler/stage1/package-data.mk: $(fixed_pkg_prev)
799 endif
800
801 ifneq "$(BINDIST)" "YES"
802 # Make sure we have all the GHCi libs by the time we've built
803 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
804 # GHCi libs, and we don't have a better way to express that dependency.
805 #
806 GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
807 $(compiler_stage2_GHCI_LIB)
808
809 ifeq "$(UseArchivesForGhci)" "NO"
810 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
811 endif
812
813 ifeq "$(UseArchivesForGhci)" "YES"
814 GHCI_lib_way = v
815 else
816 GHCI_lib_way = GHCI
817 endif
818
819 # Deps for TH uses in libraries
820 $(foreach way, $(GhcLibWays),$(eval \
821 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
822 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
823 ))
824 endif
825
826 # -----------------------------------------------
827 # Haddock-related bits
828
829 # Build the Haddock contents and index
830 ifeq "$(HADDOCK_DOCS)" "YES"
831 libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES)
832 cd libraries && sh gen_contents_index --intree
833 ifeq "$(phase)" "final"
834 $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
835 endif
836 INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
837 endif
838
839 # -----------------------------------------------------------------------------
840 # Creating a local mingw copy on Windows
841
842 ifeq "$(Windows_Host)" "YES"
843
844 install : install_mingw
845 .PHONY: install_mingw
846 install_mingw : $(INPLACE_MINGW)
847 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
848
849 install : install_perl
850 .PHONY: install_perl
851 install_perl : $(INPLACE_PERL)
852 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
853
854 endif # Windows_Host
855
856 ifneq "$(BINDIST)" "YES"
857 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
858 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
859 endif # BINDIST
860
861 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
862 $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \
863 | $$(dir $$@)/.
864 "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@
865
866 .PHONY: tags
867 tags: tags_compiler
868
869 .PHONY: TAGS
870 TAGS: TAGS_compiler
871
872 # -----------------------------------------------------------------------------
873 # Installation
874
875 install: install_libs install_packages install_libexecs \
876 install_bins install_libexec_scripts
877 ifeq "$(HADDOCK_DOCS)" "YES"
878 install: install_docs
879 endif
880
881 define installLibsTo
882 # $1 = libraries to install
883 # $2 = directory to install to
884 #
885 # The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because
886 # on Win64, "install -s" calls a strip that doesn't understand 64bit binaries.
887 # For some reason, this means the DLLs end up non-executable, which means
888 # executables that use them just segfault.
889 $(INSTALL_DIR) $2
890 for i in $1; do \
891 case $$i in \
892 *.a) \
893 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
894 $(RANLIB_CMD) $2/`basename $$i` ;; \
895 *.dll) \
896 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \
897 $(STRIP_CMD) $2/`basename $$i` ;; \
898 *.so) \
899 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \
900 *.dylib) \
901 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \
902 *) \
903 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \
904 esac; \
905 done
906 endef
907
908 install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS)
909 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
910 ifneq "$(INSTALL_BINS)" ""
911 for i in $(INSTALL_BINS); do \
912 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
913 done
914 endif
915 ifneq "$(INSTALL_SCRIPTS)" ""
916 for i in $(INSTALL_SCRIPTS); do \
917 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
918 done
919 endif
920
921 install_libs: $(INSTALL_LIBS)
922 $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)")
923
924 # We rename ghc-stage2, so that the right program name is used in error
925 # messages etc. But not on windows.
926 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = YES
927 ifeq "$(Stage1Only) $(Windows_Host)" "YES YES"
928 # resulting ghc-stage1 is built to run on windows
929 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO
930 endif
931 ifeq "$(Stage1Only) $(Windows_Target)" "NO YES"
932 # resulting ghc-stage1 is built to run on windows
933 RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO
934 endif
935
936 install_libexecs: $(INSTALL_LIBEXECS)
937 ifneq "$(INSTALL_LIBEXECS)" ""
938 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
939 for i in $(INSTALL_LIBEXECS); do \
940 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
941 done
942 ifeq "$(RENAME_LIBEXEC_GHC_STAGE_TO_GHC)" "YES"
943 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc"
944 endif
945 endif
946
947 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
948 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
949 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin"
950 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
951 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \
952 done
953 endif
954
955 install_docs: $(INSTALL_DOCS)
956 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
957 ifneq "$(INSTALL_DOCS)" ""
958 for i in $(INSTALL_DOCS); do \
959 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
960 done
961 endif
962 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html"
963 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
964 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
965 $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries"
966 for i in $(INSTALL_LIBRARY_DOCS); do \
967 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
968 done
969 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
970 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
971 endif
972 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
973 for i in $(INSTALL_HTML_DOC_DIRS); do \
974 $(CP) -Rp $$i "$(DESTDIR)$(docdir)/html"; \
975 done
976 endif
977
978 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
979
980 ifeq "$(BINDIST) $(CrossCompiling)" "NO YES"
981 # when installing ghc-stage2 we can't run target's
982 # 'ghc-pkg' and 'ghc-stage2' but those are needed for registration.
983 INSTALLED_GHC_REAL=$(TOP)/inplace/bin/ghc-stage1
984 INSTALLED_GHC_PKG_REAL=$(TOP)/$(ghc-pkg_DIST_BINARY)
985 else # CrossCompiling
986 # Install packages in the right order, so that ghc-pkg doesn't complain.
987 # Also, install ghc-pkg first.
988 ifeq "$(Windows_Host)" "NO"
989 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc
990 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg
991 else
992 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
993 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
994 endif
995 endif # CrossCompiling
996
997 # Set the INSTALL_DISTDIR_p for each package; compiler is special
998 $(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\
999 $(eval INSTALL_DISTDIR_$p = dist-install))
1000 INSTALL_DISTDIR_compiler = stage2
1001
1002 # Now we can do the installation
1003 install_packages: install_libexecs
1004 install_packages: rts/dist/package.conf.install
1005 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
1006 $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
1007 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
1008 $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts"
1009 $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts")
1010 $(foreach p, $(INSTALL_PACKAGES), \
1011 $(call make-command, \
1012 "$(ghc-cabal_INPLACE)" copy \
1013 $p $(INSTALL_DISTDIR_$p) \
1014 "$(STRIP_CMD)" \
1015 '$(DESTDIR)' \
1016 '$(prefix)' \
1017 '$(ghclibdir)' \
1018 '$(docdir)/html/libraries' \
1019 '$(GhcLibWays)'))
1020 "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install
1021 $(foreach p, $(INSTALL_PACKAGES), \
1022 $(call make-command, \
1023 "$(ghc-cabal_INPLACE)" register \
1024 $p $(INSTALL_DISTDIR_$p) \
1025 "$(INSTALLED_GHC_REAL)" \
1026 "$(INSTALLED_GHC_PKG_REAL)" \
1027 "$(DESTDIR)$(topdir)" \
1028 '$(DESTDIR)' \
1029 '$(prefix)' \
1030 '$(ghclibdir)' \
1031 '$(docdir)/html/libraries' \
1032 $(RelocatableBuild)))
1033 # when we install the packages above, ghc-pkg obeys umask when creating
1034 # the package.conf files, but for everything else we specify the
1035 # permissions. We therefore now fix the permissions of package.cache.
1036 # This means "sudo make install" does the right thing even if it runs
1037 # with an 077 umask.
1038 for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
1039
1040 # Finally, update package.cache to ensure it's newer than the registration
1041 # files. This avoids #13375.
1042 "$(INSTALLED_GHC_PKG_REAL)" --global-package-db "$(INSTALLED_PACKAGE_CONF)" recache
1043
1044 # -----------------------------------------------------------------------------
1045 # Binary distributions
1046
1047 ifneq "$(CLEANING)" "YES"
1048 # This rule seems to hold some files open on Windows which prevents
1049 # cleaning, perhaps due to the $(wildcard).
1050
1051 $(eval $(call bindist-list,.,\
1052 LICENSE \
1053 README \
1054 INSTALL \
1055 configure config.sub config.guess install-sh \
1056 settings.in \
1057 packages \
1058 Makefile \
1059 mk/config.mk.in \
1060 $(INPLACE_BIN)/mkdirhier \
1061 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
1062 $(BINDIST_WRAPPERS) \
1063 $(BINDIST_PERL_SOURCES) \
1064 $(BINDIST_LIBS) \
1065 $(BINDIST_HI) \
1066 $(BINDIST_EXTRAS) \
1067 $(includes_H_FILES) \
1068 $(includes_DERIVEDCONSTANTS) \
1069 $(includes_GHCCONSTANTS) \
1070 $(libffi_HEADERS) \
1071 $(INSTALL_LIBEXECS) \
1072 $(INSTALL_LIBEXEC_SCRIPTS) \
1073 $(INSTALL_BINS) \
1074 $(INSTALL_SCRIPTS) \
1075 $(INSTALL_MANPAGES) \
1076 $(INSTALL_DOCS) \
1077 $(INSTALL_LIBRARY_DOCS) \
1078 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
1079 docs/index.html \
1080 $(wildcard compiler/stage2/doc) \
1081 $(wildcard libraries/*/dist-install/doc/) \
1082 $(wildcard libraries/*/*/dist-install/doc/) \
1083 $(filter-out settings,$(INSTALL_LIBS)) \
1084 $(RTS_INSTALL_LIBS) \
1085 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
1086 mk/project.mk \
1087 mk/install.mk.in \
1088 bindist.mk \
1089 libraries/gen_contents_index \
1090 libraries/prologue.txt \
1091 $(wildcard libraries/dph/LICENSE \
1092 libraries/dph/ghc-packages \
1093 libraries/dph/ghc-packages2 \
1094 libraries/dph/ghc-stage2-package) \
1095 ))
1096 endif
1097 # mk/project.mk gets an absolute path, so we manually include it in
1098 # the bindist with a relative path
1099
1100 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1101
1102 # Note [Persist CrossCompiling in binary distributions]
1103 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1104 #
1105 # The build system uses the CrossCompiling variable to decide whether or not we
1106 # should build various packages that must be built using the compiler.
1107 # Consequently, it is important that we persist its value in the binary
1108 # distribution so we know during `make install` not to go looking for files that
1109 # would have been built for these packages. Failing to do this causes #13325.
1110 #
1111 # See Note [No stage2 packages when CrossCompiling or Stage1Only].
1112
1113 unix-binary-dist-prep:
1114 $(call removeTrees,bindistprep/)
1115 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1116 set -e; for i in packages LICENSE compiler ghc iserv rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1117 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1118 echo "BUILD_SPHINX_HTML = $(BUILD_SPHINX_HTML)" >> $(BIN_DIST_MK)
1119 echo "BUILD_SPHINX_PDF = $(BUILD_SPHINX_PDF)" >> $(BIN_DIST_MK)
1120 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1121 echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK)
1122 echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK)
1123 # See Note [Persist CrossCompiling in binary distributions]
1124 echo "CrossCompiling = $(CrossCompiling)" >> $(BIN_DIST_MK)
1125 cd $(BIN_DIST_PREP_DIR) && autoreconf
1126 $(call removeFiles,$(BIN_DIST_PREP_TAR))
1127 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1128 # tree then we want to include the real file, not a symlink to it
1129 cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1130
1131 windows-binary-dist-prep:
1132 $(call removeTrees,bindistprep/)
1133 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1134 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP)
1135
1136 # tryTimes tries to run its third argument multiple times, until it
1137 # succeeds. Don't call it directly; call try10Times instead.
1138 # The first and second argument to tryTimes are lists of values.
1139 # The length of the first argument is the number of times we have
1140 # already tried. The length of the second argument is the number more
1141 # times we will try.
1142 tryTimes = $(if $2, \
1143 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1144 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1145 )
1146
1147 # Try to run the argument 10 times. If all 10 fail, fail.
1148 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1149
1150 .PHONY: publish-binary-dist
1151 publish-binary-dist:
1152 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist)
1153
1154 ifeq "$(mingw32_TARGET_OS)" "1"
1155 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc
1156 else
1157 DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc
1158 endif
1159
1160 .PHONY: publish-docs
1161 publish-docs:
1162 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1163
1164 # -----------------------------------------------------------------------------
1165 # Source distributions
1166
1167 # Do it like this:
1168 #
1169 # $ ./boot
1170 # $ ./configure
1171 # $ make sdist
1172 #
1173
1174 # A source dist is built from a (partial) build tree, because we
1175 # require some extra files not contained in a git checkout: the
1176 # output from Happy and Alex, for example.
1177 #
1178 # The steps performed by 'make sdist' are as follows:
1179 # - build those extra files
1180 # - create a complete link-tree of the current build tree in /tmp
1181 # - run 'make distclean' on that tree
1182 # - remove a bunch of other files that we know shouldn't be in the dist
1183
1184 #
1185 # Directory in which we're going to build the src dist
1186 #
1187 SRC_DIST_ROOT = sdistprep
1188 SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)
1189
1190 SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
1191 SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
1192 SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
1193 SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT)
1194
1195 SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src
1196 SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs
1197 SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME)
1198 SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT)
1199
1200 SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
1201 SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
1202 SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
1203 SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT)
1204
1205 #
1206 # Files to include in source distributions
1207 #
1208 SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1209 utils docs rts compiler ghc driver libraries libffi-tarballs iserv
1210 SRC_DIST_GHC_FILES += \
1211 configure.ac config.guess config.sub configure \
1212 aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \
1213 install-sh settings.in VERSION GIT_COMMIT_ID \
1214 boot packages ghc.mk MAKEHELP.md
1215
1216 .PHONY: VERSION
1217 VERSION:
1218 @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \
1219 then echo "$@ needs no update"; \
1220 else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi
1221
1222 .PHONY: GIT_COMMIT_ID
1223 GIT_COMMIT_ID:
1224 @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \
1225 echo "******************************************************************************"; \
1226 echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \
1227 echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \
1228 echo "Please re-run './configure' before creating source-distribution"; \
1229 echo "******************************************************************************"; \
1230 exit 1; \
1231 fi
1232 @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \
1233 then echo "$@ needs no update"; \
1234 else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi
1235
1236 sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID
1237
1238 # Extra packages which shouldn't be in the source distribution: see #8801
1239 EXTRA_PACKAGES=parallel stm random primitive vector dph
1240
1241 .PHONY: sdist-ghc-prep-tree
1242 sdist-ghc-prep-tree :
1243 $(call removeTrees,$(SRC_DIST_GHC_ROOT))
1244 $(call removeFiles,$(SRC_DIST_GHC_TARBALL))
1245 mkdir -p $(SRC_DIST_ROOT)
1246 mkdir -p $(SRC_DIST_GHC_ROOT)
1247 mkdir -p $(SRC_DIST_GHC_DIR)
1248 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1249 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
1250 cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
1251 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
1252 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
1253 $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
1254 $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
1255 for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done
1256 cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1257
1258 # Add files generated by alex and happy.
1259 # These rules depend on sdist-ghc-prep-tree.
1260 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x))
1261 $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y))
1262 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x))
1263 $(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y))
1264 $(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y))
1265 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x))
1266 $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y))
1267
1268 .PHONY: sdist-ghc-prep
1269 sdist-ghc-prep : sdist-ghc-prep-tree
1270
1271 .PHONY: sdist-windows-tarballs-prep
1272 sdist-windows-tarballs-prep :
1273 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT))
1274 $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL))
1275 mkdir -p $(SRC_DIST_ROOT)
1276 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT)
1277 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)
1278 mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs
1279 cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs
1280 $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git)
1281
1282 .PHONY: sdist-testsuite-prep
1283 sdist-testsuite-prep :
1284 $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
1285 $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
1286 mkdir -p $(SRC_DIST_ROOT)
1287 mkdir -p $(SRC_DIST_TESTSUITE_ROOT)
1288 mkdir -p $(SRC_DIST_TESTSUITE_DIR)
1289 mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite
1290 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
1291 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean
1292
1293 .PHONY: sdist-ghc
1294 sdist-ghc: sdist-ghc-prep
1295 cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL)
1296
1297 .PHONY: sdist-windows-tarballs
1298 sdist-windows-tarballs: sdist-windows-tarballs-prep
1299 cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)
1300
1301 .PHONY: sdist-testsuite
1302 sdist-testsuite: sdist-testsuite-prep
1303 cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
1304
1305
1306 .PHONY: sdist
1307 sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite
1308
1309 sdist-manifest : $(SRC_DIST_GHC_TARBALL)
1310 tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1311
1312 # Upload the distribution(s)
1313 # Retrying is to work around buggy firewalls that corrupt large file transfers
1314 # over SSH.
1315 ifneq "$(PublishLocation)" ""
1316 publish-sdist :
1317 $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist)
1318 $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist)
1319 endif
1320
1321 # -----------------------------------------------------------------------------
1322 # sdisting libraries
1323
1324 # Use manually, with e.g.:
1325 # make sdist_directory
1326
1327 sdist_%:
1328 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1329
1330 # -----------------------------------------------------------------------------
1331 # Cleaning
1332
1333 .PHONY: clean
1334
1335 CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h
1336 CLEAN_FILES += libraries/base/include/EventConfig.h
1337 CLEAN_FILES += mk/config.mk.old
1338 CLEAN_FILES += mk/project.mk.old
1339 CLEAN_FILES += compiler/ghc.cabal.old
1340
1341 # These are no longer generated, but we still clean them for a while
1342 # as they may still be in old GHC trees:
1343 CLEAN_FILES += includes/GHCConstants.h
1344 CLEAN_FILES += includes/DerivedConstants.h
1345 CLEAN_FILES += includes/ghcautoconf.h
1346 CLEAN_FILES += includes/ghcplatform.h
1347 CLEAN_FILES += includes/ghcversion.h
1348 CLEAN_FILES += utils/ghc-pkg/Version.hs
1349 CLEAN_FILES += compiler/prelude/primops.txt
1350 CLEAN_FILES += $(wildcard compiler/primop*incl)
1351
1352 clean : clean_files clean_libraries
1353
1354 .PHONY: clean_files
1355 clean_files :
1356 $(call removeFiles,$(CLEAN_FILES))
1357 # this is here since CLEAN_FILES can't handle folders
1358 $(call removeTrees,includes/dist-derivedconstants)
1359 $(call removeTrees,inplace/bin)
1360 $(call removeTrees,inplace/lib)
1361 $(call removeTrees,libraries/bootstrapping.conf)
1362
1363 .PHONY: clean_libraries
1364 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
1365 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0))
1366
1367 clean_libraries:
1368 $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1369 $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))))
1370 $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1371 $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1372 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1373
1374 # We have to define a clean target for each library manually, because the
1375 # libraries/*/ghc.mk files are not included when we're cleaning.
1376 ifeq "$(CLEANING)" "YES"
1377 $(foreach lib,$(PACKAGES_STAGE0),\
1378 $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot)))
1379 $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\
1380 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1381 endif
1382
1383 clean : clean_haddock_index
1384 .PHONY: clean_haddock_index
1385 clean_haddock_index:
1386 $(call removeTrees,libraries/dist-haddock)
1387
1388 clean : clean_bindistprep
1389 .PHONY: clean_bindistprep
1390 clean_bindistprep:
1391 $(call removeTrees,bindistprep/)
1392
1393 distclean : clean
1394 # Clean the files that ./validate creates.
1395 $(call removeFiles,mk/are-validating.mk)
1396
1397 # Clean the files that we ask ./configure to create.
1398 $(call removeFiles,mk/config.mk)
1399 $(call removeFiles,mk/install.mk)
1400 $(call removeFiles,mk/project.mk)
1401 $(call removeFiles,compiler/ghc.cabal)
1402 $(call removeFiles,ghc/ghc-bin.cabal)
1403 $(call removeFiles,libraries/ghci/ghci.cabal)
1404 $(call removeFiles,utils/runghc/runghc.cabal)
1405 $(call removeFiles,settings)
1406 $(call removeFiles,docs/users_guide/ug-book.xml)
1407 $(call removeFiles,docs/users_guide/ug-ent.xml)
1408 $(call removeFiles,docs/users_guide/ghc_config.py)
1409 $(call removeFiles,docs/index.html)
1410 $(call removeFiles,libraries/prologue.txt)
1411 $(call removeFiles,distrib/configure.ac)
1412 $(call removeFiles,ch01.html ch02.html index.html)
1413
1414 # ./configure also makes these.
1415 $(call removeFiles,mk/config.h)
1416
1417 # Internal files generated by ./configure for itself.
1418 $(call removeFiles,config.cache config.status config.log)
1419
1420 # The root Makefile makes .old versions of some files that configure
1421 # generates, so we clean those too.
1422 $(call removeFiles,mk/config.mk.old)
1423 $(call removeFiles,mk/project.mk.old)
1424 $(call removeFiles,compiler/ghc.cabal.old)
1425
1426 # Clean the *Config.h files generated by library configure scripts
1427 $(call removeFiles,libraries/base/include/HsBaseConfig.h)
1428 $(call removeFiles,libraries/base/include/EventConfig.h)
1429 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
1430 $(call removeFiles,libraries/process/include/HsProcessConfig.h)
1431 $(call removeFiles,libraries/unix/include/HsUnixConfig.h)
1432 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h)
1433
1434 # The library configure scripts also like creating autom4te.cache
1435 # directories, so clean them all up.
1436 $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1437
1438 # We make these when making or testing bindists
1439 $(call removeFiles,bindist-list)
1440 $(call removeTrees,bindisttest/a)
1441
1442 # Not sure why this is being cleaned here.
1443 $(call removeTrees,includes/dist-derivedconstants)
1444
1445 # Also clean Windows-only inplace directories.
1446 # Don't delete 'inplace' itself, it contains source files.
1447 $(call removeTrees,inplace/mingw)
1448 $(call removeTrees,inplace/perl)
1449
1450 maintainer-clean : distclean
1451 $(call removeFiles,configure mk/config.h.in)
1452 $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache))
1453 $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \
1454 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1455 $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1456 $(call removeFiles,$(patsubst %, libraries/%/configure, \
1457 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1458 $(call removeFiles,libraries/base/include/HsBaseConfig.h.in)
1459 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
1460 $(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
1461 $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
1462 $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in)
1463
1464 .PHONY: all_libraries
1465
1466 .PHONY: bootstrapping-files
1467 # See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting
1468 bootstrapping-files: $(includes_H_CONFIG)
1469 bootstrapping-files: $(includes_DERIVEDCONSTANTS)
1470 bootstrapping-files: $(includes_GHCCONSTANTS)
1471 bootstrapping-files: $(libffi_HEADERS)
1472
1473 .DELETE_ON_ERROR:
1474
1475 # -----------------------------------------------------------------------------
1476
1477 ifeq "$(HADDOCK_DOCS)" "YES"
1478 BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock"
1479 endif
1480 ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES"
1481 BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla
1482 else
1483 BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared
1484 endif
1485 BINDIST_LIBRARY_FLAGS += --disable-library-prof
1486
1487 .PHONY: validate_build_xhtml
1488 validate_build_xhtml:
1489 cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup
1490 cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)"
1491 cd libraries/xhtml && ./Setup build --builddir=dist-bindist
1492 ifeq "$(HADDOCK_DOCS)" "YES"
1493 cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist
1494 endif
1495 cd libraries/xhtml && ./Setup install --builddir=dist-bindist
1496 cd libraries/xhtml && ./Setup clean --builddir=dist-bindist
1497 cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o
1498
1499 # Note [No stage2 packages when CrossCompiling or Stage1Only]
1500 #
1501 # (first read Note [CrossCompiling vs Stage1Only] and
1502 # Note [Stage1Only vs stage=1] in mk/config.mk.in)
1503 #
1504 # When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the
1505 # following packages from the build:
1506 # * packages that we build with ghc-stage2 [1]
1507 # * packages that depend on the ghc library [2]
1508 #
1509 # Here's why:
1510 # - first of all, ghc-stage1 can't use stage0's ghc library (it's too old)
1511 # - neither do we register the ghc library (compiler/stage1) that we build
1512 # with stage0. TODO Why not? We do build it...
1513 # - as a result, we need to a) use ghc-stage2 to build packages that depend on
1514 # the ghc library (e.g. ghctags [4] and mkUserGuidePart) and b) exclude
1515 # those packages when ghc-stage2 is not available.
1516 # - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just
1517 # said we didn't want it), so we have to exclude the stage2 packages from
1518 # the build. This includes the case where Stage1Only=YES is combined with
1519 # CrossCompiling=YES (Building GHC as a cross-compiler [3]).
1520 # - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself
1521 # [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't
1522 # run on the host platform at all; it is built to run on $(TARGETPLATFORM)"
1523 # [5]. Therefore in this case we also have to exclude the stage2 packages
1524 # from the build.
1525 #
1526 # Because we omit certain packages from the build when CrossCompiling=YES,
1527 # it is important that we remember the value of CrossCompiling in binary
1528 # distributions that we produce. See Note [Persist CrossCompiling in binary
1529 # distributions].
1530 #
1531 # [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2'
1532 #
1533 # [2]
1534 # find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)'
1535 #
1536 # [3] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling
1537 #
1538 # [4] 5fb72555f7b7ab67a33583f33ad9160761ca434f
1539 # "ghctags needs the stage2 compiler, since it uses the GHC API."
1540 #
1541 # [5] * bc31dbe8ee22819054df60f5ef219fed393a1c54
1542 # "Disable any packages built with stage 2 when cross-compiling
1543 # Since we can't run stage 2 on the host."
1544 #
1545 # * 72995160b0b190577b5c0cb8d7bd0426cc455b05
1546 # "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)"
1547
1548 # -----------------------------------------------------------------------------
1549 # Numbered phase targets
1550
1551 # In phase 1, we'll be building dependency files for most things
1552 # built by the bootstrapping compiler while make is 'include'ing
1553 # makefiles. But in order to build dependency files, we'll need to
1554 # build any automatically generated .hs files, which means that
1555 # we'll need to be able to build any tools that generate .hs files
1556 # etc. But in order to do that, we need to already know the
1557 # dependencies for those tools, so we build their dependency files
1558 # here.
1559 .PHONY: phase_0_builds
1560 # hsc2hs is needed, e.g. to make the .hs files for hpc.
1561 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1562 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1563 # genprimopcode is needed to make the .hs-incl files that are in the
1564 # ghc package.
1565 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1566 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1567 # deriveConstants is used to create header files included in the
1568 # ghc package.
1569 phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell)
1570 phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm)
1571
1572 .PHONY: phase_1_builds
1573 phase_1_builds: $(PACKAGE_DATA_MKS)