Don't check that we have found haddock
[ghc.git] / Makefile
1 ############################################################################
2 #
3 # This is the top-level Makefile for GHC
4 #
5 # Targets:
6 #
7 # bootstrap (DEFAULT)
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
10 # ("stage 2").
11 #
12 # bootstrap2
13 # Same as bootstrap
14 #
15 # bootstrap3
16 # bootstrap2 + we build GHC one more time ("stage 3")
17 #
18 # stage1
19 # Just build up to stage 1
20 #
21 # stage2
22 # Just build stage 2 (stage 1 must be built)
23 #
24 # stage3
25 # Just build stage 3 (stage 2 must be built)
26 #
27 # all
28 # Same as bootstrap
29 #
30 # install
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
33 #
34 # dist
35 # Make a source dist (WARNING: runs 'make distclean' first)
36 #
37 # binary-dist
38 # Builds a binary distribution
39 #
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
42 # installer package
43 #
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
47 #
48 # hc-file-bundle
49 # Builds an HC-file bundle, for bootstrapping
50 #
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
53 #
54 ############################################################################
55
56 TOP=.
57 include $(TOP)/mk/boilerplate.mk
58
59 #
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
62 #
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
65 #
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
67
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = includes compiler docs utils driver
71 else
72 SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc
73 endif
74
75 SUBDIRS = gmp libffi includes utils driver docs rts compiler ghc libraries libraries/Cabal/doc
76
77 check-all: check-packages
78
79 # Sanity check that all the boot libraries are in the tree, to catch
80 # failure to run darcs-all.
81 check-packages :
82 @ds=`grep "^[^# ][^ ]* *[^ ][^ ]* *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\
83 for d in $$ds; do \
84 if test ! -d $$d; then \
85 echo "Looks like you're missing $$d,"; \
86 echo "maybe you haven't done './darcs-all get'?"; \
87 exit 1; \
88 fi \
89 done
90 @if test ! -f libraries/base/configure; then \
91 echo "Looks like you're missing base's configure script."; \
92 echo "Did you run 'sh boot' at the top level?"; \
93 exit 1; \
94 fi
95
96 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
97 ifneq "$(WhatGccIsCalled)" ""
98 GCC_LIB_DEP = stamp.inplace-gcc-lib
99 endif
100 endif
101
102 stage1 : $(GCC_LIB_DEP) check-all
103 $(MAKE) -C libraries boot
104 $(MAKE) -C gmp all
105 $(MAKE) -C libffi all
106 $(MAKE) -C utils/mkdependC boot
107 $(MAKE) -C utils with-bootstrapping-compiler
108 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
109 for i in $(SUBDIRS_BUILD); do \
110 echo "------------------------------------------------------------------------"; \
111 echo "== $(MAKE) boot $(MFLAGS);"; \
112 echo " in $(shell pwd)/$$i"; \
113 echo "------------------------------------------------------------------------"; \
114 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
115 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
116 done; \
117 for i in $(SUBDIRS_BUILD); do \
118 echo "------------------------------------------------------------------------"; \
119 echo "== $(MAKE) all $(MFLAGS);"; \
120 echo " in $(shell pwd)/$$i"; \
121 echo "------------------------------------------------------------------------"; \
122 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
123 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
124 done
125 $(MAKE) -C rts boot
126 $(MAKE) -C rts
127 $(MAKE) -C libraries all
128 $(MAKE) -C utils with-stage-1
129
130 # When making distributions (i.e., whether with binary-dist or using the
131 # vanilla install target to create an installer package), we can have problems
132 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
133 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
134 # an example. Thus, we explicitly build a second version with the stage 1
135 # compiler of all utils that get installed and of all extra support binaries
136 # includes in binary dists.
137 stage2 : check-all
138 $(MAKE) -C compiler stage=2 boot
139 $(MAKE) -C compiler stage=2
140 ifeq "$(HADDOCK_DOCS)" "YES"
141 $(MAKE) -C compiler stage=2 doc
142 endif
143
144 stage3 : check-all
145 $(MAKE) -C compiler stage=3 boot
146 $(MAKE) -C compiler stage=3
147
148 bootstrap : bootstrap2
149
150 bootstrap2 : stage1
151 $(MAKE) stage2
152
153 bootstrap3 : bootstrap2
154 $(MAKE) stage3
155
156 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
157 ifneq "$(WhatGccIsCalled)" ""
158 all :: stamp.inplace-gcc-lib
159
160 .PHONY: stamp.inplace-gcc-lib
161
162 # This is a hack to make Cabal able to find ld when we run tests with
163 # the inplace ghc. We should probably install all the gcc stuff in our
164 # tree somewhere, and then have install copy it from there rather than
165 # from the filesystem.
166 stamp.inplace-gcc-lib:
167 $(RM) -r ghc/gcc-lib
168 mkdir ghc/gcc-lib
169 cp $(LD) ghc/gcc-lib
170 touch $@
171
172 clean ::
173 $(RM) -r ghc/gcc-lib
174 $(RM) -f inplace-gcc-lib
175 endif
176 endif
177
178 all :: bootstrap
179
180 # -----------------------------------------------------------------------------
181 # Installing
182
183 # We want to install the stage 2 bootstrapped compiler by default, but we let
184 # the user override this by saying 'make install stage=1', for example.
185 ifeq "$(stage)" ""
186 INSTALL_STAGE = stage=2
187 else
188 INSTALL_STAGE =
189 endif
190
191 install-strip:
192 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
193
194 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
195 install :: check-packages
196 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
197 for i in $(SUBDIRS); do \
198 echo "------------------------------------------------------------------------"; \
199 echo "== $(MAKE) $@ $(MFLAGS);"; \
200 echo " in $(shell pwd)/$$i"; \
201 echo "------------------------------------------------------------------------"; \
202 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
203 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
204 done
205
206 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
207 # These files need to be in the InstallShield
208 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
209 # in the top-level directory of the distribution
210 INSTALL_DATAS += ANNOUNCE LICENSE README
211 endif
212
213 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
214 # and the perl interpreter and dll into the GHC prefix directory.
215 # Gcc and Perl source locations derived from configuration data.
216 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
217 ifneq "$(WhatGccIsCalled)" ""
218 install ::
219 -mkdir $(prefix)/gcc-lib
220 -mkdir $(prefix)/include
221 -mkdir $(prefix)/include/mingw
222 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
223 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
224 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
225 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
226 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
227 -cp $(GccDir)gcc.exe $(prefix)
228 -cp $(GccDir)as.exe $(prefix)/gcc-lib
229 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
230 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
231 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
232 -cp $(GhcDir)../perl.exe $(prefix)
233 -cp $(GhcDir)../perl56.dll $(prefix)
234 endif
235 endif
236
237 # Install gcc-extra-opts
238 install ::
239 $(INSTALL_DIR) $(DESTDIR)$(libdir)
240 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
241
242 install-docs ::
243 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
244 for i in $(SUBDIRS); do \
245 echo "------------------------------------------------------------------------"; \
246 echo "== $(MAKE) $@ $(MFLAGS);"; \
247 echo " in $(shell pwd)/$$i"; \
248 echo "------------------------------------------------------------------------"; \
249 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
250 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
251 done
252
253 # -----------------------------------------------------------------------------
254 # Making a binary distribution
255 #
256 # `dist' `binary-dist'
257 # Create a distribution tar file for this program. The tar file
258 # should be set up so that the file names in the tar file start with
259 # a subdirectory name which is the name of the package it is a
260 # distribution for. This name can include the version number.
261 #
262 # For example, the distribution tar file of GCC version 1.40 unpacks
263 # into a subdirectory named `gcc-1.40'.
264 #
265 # The easiest way to do this is to create a subdirectory
266 # appropriately named, use ln or cp to install the proper files in
267 # it, and then tar that subdirectory.
268 #
269 # The dist target should explicitly depend on all non-source files
270 # that are in the distribution, to make sure they are up to date in
271 # the distribution. See Making Releases.
272 #
273 # binary-dist is a GHC addition for binary distributions
274 #
275
276 binary-dist::
277 -rm -rf $(BIN_DIST_DIR)
278 -$(RM) $(BIN_DIST_TAR_BZ2)
279
280 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
281
282 binary-dist::
283 $(MAKE) prefix=$(BIN_DIST_DIR) install
284 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
285
286 binary-dist::
287 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
288
289 binary-dist::
290 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
291 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
292
293 # Tar up the distribution and build a manifest
294 binary-dist :: tar-binary-dist
295
296 .PHONY: tar-binary-dist
297 tar-binary-dist:
298 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 > $(BIN_DIST_TAR_BZ2) )
299 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TAR_BZ2) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
300
301 else
302
303 .PHONY: binary-dist
304
305 BIN_DIST_VARFILE=$(BIN_DIST_PREP)/Makefile-vars.in
306
307 WHERE_AM_I = $(BIN_DIST_NAME)
308
309 binary-dist::
310 # For the most part we will be putting filenames in $(BIN_DIST_LIST),
311 # and telling tar to tar all of those files up. So to start with we
312 # remove $(BIN_DIST_LIST) so that we can start with an empty slate
313 $(RM) -f $(BIN_DIST_LIST)
314 # Now we add a few files from mk/ to $(BIN_DIST_LIST)
315 echo $(WHERE_AM_I)/mk/package.mk >> $(BIN_DIST_LIST)
316 echo $(WHERE_AM_I)/mk/install.mk >> $(BIN_DIST_LIST)
317 echo $(WHERE_AM_I)/mk/recurse.mk >> $(BIN_DIST_LIST)
318 echo $(WHERE_AM_I)/mk/cabal.mk >> $(BIN_DIST_LIST)
319 echo $(WHERE_AM_I)/mk/cabal-flags.mk >> $(BIN_DIST_LIST)
320 echo $(WHERE_AM_I)/mk/fptools.css >> $(BIN_DIST_LIST)
321 echo $(WHERE_AM_I)/ANNOUNCE >> $(BIN_DIST_LIST)
322 echo $(WHERE_AM_I)/LICENSE >> $(BIN_DIST_LIST)
323 echo $(WHERE_AM_I)/install-sh >> $(BIN_DIST_LIST)
324 echo $(WHERE_AM_I)/extra-gcc-opts.in >> $(BIN_DIST_LIST)
325 echo $(WHERE_AM_I)/config.guess >> $(BIN_DIST_LIST)
326 echo $(WHERE_AM_I)/config.sub >> $(BIN_DIST_LIST)
327 # Now we recurse into various subdirectories and tell them to add and
328 # files that they want into $(BIN_DIST_LIST)
329 # XXX Ug, this duplication of "-C foo WHERE_AM_I=.../foo" isn't nice.
330 $(MAKE) -C gmp binary-dist WHERE_AM_I=$(WHERE_AM_I)/gmp
331 $(MAKE) -C includes binary-dist WHERE_AM_I=$(WHERE_AM_I)/includes
332 $(MAKE) -C compiler binary-dist WHERE_AM_I=$(WHERE_AM_I)/compiler $(INSTALL_STAGE)
333 $(MAKE) -C ghc binary-dist WHERE_AM_I=$(WHERE_AM_I)/ghc $(INSTALL_STAGE)
334 $(MAKE) -C rts binary-dist WHERE_AM_I=$(WHERE_AM_I)/rts
335 $(MAKE) -C driver binary-dist WHERE_AM_I=$(WHERE_AM_I)/driver
336 $(MAKE) -C utils binary-dist WHERE_AM_I=$(WHERE_AM_I)/utils
337 $(MAKE) -C docs binary-dist WHERE_AM_I=$(WHERE_AM_I)/docs
338 $(MAKE) -C libraries binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries
339 $(MAKE) -C libraries/Cabal/doc binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries/Cabal/doc
340 # Now thinks get messier. Some files we need to move around, rename or
341 # generate. We do this under $(BIN_DIST_PREP).
342 $(RM) -rf $(BIN_DIST_PREP_DIR)
343 $(MKDIRHIER) $(BIN_DIST_PREP)/mk
344 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_PREP)/mk/boilerplate.mk
345 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_PREP)/mk/target.mk
346 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_PREP)/mk/target.mk
347 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_PREP)/mk/target.mk
348 touch $(BIN_DIST_PREP)/mk/bindist.mk
349 ifeq "$(darwin_TARGET_OS)" "1"
350 cp mk/fix_install_names.sh $(BIN_DIST_PREP)/mk
351 endif
352
353 cp distrib/Makefile $(BIN_DIST_PREP)
354 cp distrib/INSTALL $(BIN_DIST_PREP)
355 cp distrib/README $(BIN_DIST_PREP)
356 cp distrib/configure-bin.ac $(BIN_DIST_PREP)/configure.ac
357 # We can't just list aclocal.m4 in $(BIN_DIST_LIST), as it needs to be
358 # next to configure.ac when we run autoreconf
359 cp aclocal.m4 $(BIN_DIST_PREP)
360 cd $(BIN_DIST_PREP) && autoreconf
361 # We need to copy the pwd program that was built with stage1 to where
362 # the build system expects to find it, i.e. the location the pwd built
363 # with the bootstrapping compiler normally occupies
364 $(MKDIRHIER) $(BIN_DIST_PREP)/utils/pwd
365 cp utils/pwd/dist-install/build/pwd/pwd $(BIN_DIST_PREP)/utils/pwd
366 # And likewise the installPackage program
367 $(MKDIRHIER) $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
368 cp utils/installPackage/dist-install/build/installPackage/installPackage \
369 $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
370
371 echo "package = ghc" >> $(BIN_DIST_VARFILE)
372 echo "version = $(ProjectVersion)" >> $(BIN_DIST_VARFILE)
373 echo "ProjectVersion = $(ProjectVersion)" >> $(BIN_DIST_VARFILE)
374 echo "HaveLibGmp = $(HaveLibGmp)" >> $(BIN_DIST_VARFILE)
375 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(BIN_DIST_VARFILE)
376 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(BIN_DIST_VARFILE)
377 echo "GhcHasEditline = $(GhcHasEditline)" >> $(BIN_DIST_VARFILE)
378 echo "BootingFromHc = $(BootingFromHc)" >> $(BIN_DIST_VARFILE)
379 echo "XMLDocWays = $(XMLDocWays)" >> $(BIN_DIST_VARFILE)
380 # We won't actually use xsltproc, but we need to know if it's "" or not
381 echo "XSLTPROC = $(XSLTPROC)" >> $(BIN_DIST_VARFILE)
382 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(BIN_DIST_VARFILE)
383 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_VARFILE)
384 echo "INTEGER_LIBRARY = $(INTEGER_LIBRARY)" >> $(BIN_DIST_VARFILE)
385 cat distrib/Makefile-bin-vars.in >> $(BIN_DIST_VARFILE)
386
387 # With that done, we can now build the actual tarball
388
389 $(RM) -f $(BIN_DIST_NAME)
390 ln -s . $(BIN_DIST_NAME)
391 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
392 # tree then we want to include the real file, not a symlink to it
393 tar hcf $(BIN_DIST_TAR) -T $(BIN_DIST_LIST)
394 cd $(BIN_DIST_PREP_DIR) && tar rf $(BIN_DIST_TAR) $(BIN_DIST_NAME)
395 bzip2 < $(BIN_DIST_TAR) > $(BIN_DIST_TAR_BZ2)
396 tar tf $(BIN_DIST_TAR) | sort > bin-manifest-$(ProjectVersion)
397 endif
398
399 PUBLISH_FILES = $(BIN_DIST_TAR_BZ2)
400
401 # Upload the distribution and documentation
402 ifneq "$(ISCC)" ""
403 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
404 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
405
406 PUBLISH_FILES += $(WINDOWS_INSTALLER)
407
408 binary-dist :: generate-windows-installer
409
410 .PHONY: generate-windows-installer
411 generate-windows-installer ::
412 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
413 endif
414
415 # Upload the distribution and documentation
416 ifneq "$(PublishLocation)" ""
417 publish ::
418 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
419 endif
420
421 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
422
423 .PHONY: publish-binary-dist
424 publish-binary-dist ::
425 @for f in $(PUBLISH_FILES); \
426 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
427 done
428
429 # You need to "make binddisttest" before publishing the docs, as it
430 # works by publish setting $(prefix) to inside the binddisttest
431 # directory so $(docdir) points to the right place.
432
433 # We assume that Windows means Cygwin, as we can't just use docdir
434 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
435 # the machine c.
436
437 ifeq "$(Windows)" "YES"
438 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
439 else
440 PUBLISH_DOCDIR = $(docdir)
441 endif
442
443 publish-binary-dist ::
444 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
445
446 binary-dist::
447 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
448
449 # -----------------------------------------------------------------------------
450 # Building MacOS installer packages
451 #
452 # 'framework-pkg'
453 # Create an installer package for /Library/Frameworks/GHC.framework
454 #
455 # 'framework-binary-dist'
456 # Create an installer package for GHC.framework encapsulating a
457 # binary-dist to make it relocatable
458 # FIXME: This is only partially implemented so far
459
460 ifeq "$(darwin_TARGET_OS)" "1"
461
462 .PHONY: framework-pkg, framework-binary-dist
463
464 framework-pkg:
465 $(MAKE) -C distrib/MacOS framework-pkg
466
467 framework-binary-dist:
468 $(MAKE) -C distrib/MacOS framework-binary-dist
469
470 endif
471
472 # -----------------------------------------------------------------------------
473 # Building source distributions
474 #
475 # Do it like this:
476 #
477 # $ make
478 # $ make dist
479 #
480 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
481 #
482
483 .PHONY: dist
484
485 #
486 # Directory in which we're going to build the src dist
487 #
488 SRC_DIST_NAME=ghc-$(ProjectVersion)
489 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
490
491 #
492 # Files to include in source distributions
493 #
494 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
495 SRC_DIST_FILES += \
496 configure.ac config.guess config.sub configure \
497 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
498 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
499
500 # -----------------------------------------------------------------------------
501 # Source distributions
502
503 # A source dist is built from a complete build tree, because we
504 # require some extra files not contained in a darcs checkout: the
505 # output from Happy and Alex, for example.
506 #
507 # The steps performed by 'make dist' are as follows:
508 # - create a complete link-tree of the current build tree in /tmp
509 # - run 'make distclean' on that tree
510 # - remove a bunch of other files that we know shouldn't be in the dist
511 # - tar up first the extralibs package, then the main source package
512
513 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
514
515 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
516 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
517
518 VERSION :
519 echo $(ProjectVersion) >VERSION
520
521 dist :: VERSION
522
523 dist ::
524 $(RM) -rf $(SRC_DIST_DIR)
525 $(RM) $(SRC_DIST_NAME).tar.gz
526 mkdir $(SRC_DIST_DIR)
527 ( cd $(SRC_DIST_DIR) \
528 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
529 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
530 && $(MAKE) distclean \
531 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
532 && $(RM) -rf compiler/stage[123] mk/build.mk \
533 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
534 )
535 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
536 $(RM) -rf $(EXTRA_LIBS)
537 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
538
539 # Upload the distribution(s)
540 # Retrying is to work around buggy firewalls that corrupt large file transfers
541 # over SSH.
542 ifneq "$(PublishLocation)" ""
543 dist ::
544 @for i in 0 1 2 3 4 5 6 7 8 9; do \
545 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
546 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
547 done
548 @for i in 0 1 2 3 4 5 6 7 8 9; do \
549 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
550 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
551 done
552 endif
553
554 # -----------------------------------------------------------------------------
555 # HC file bundles
556
557 hc-file-bundle :
558 $(RM) -r ghc-$(ProjectVersion)
559 $(LN_S) . ghc-$(ProjectVersion)
560 $(FIND) ghc-$(ProjectVersion)/compiler \
561 ghc-$(ProjectVersion)/utils \
562 ghc-$(ProjectVersion)/libraries -follow \
563 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
564 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
565 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
566 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
567 fi; \
568 done;
569 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
570 if test "x$$f" != "x"; then \
571 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
572 fi; \
573 done;
574 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
575 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
576 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
577 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
578 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
579 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
580
581 # -----------------------------------------------------------------------------
582 # Cleaning
583
584 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
585
586 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
587 docs/users_guide/ug-book.xml extra-gcc-opts
588
589 # don't clean config.mk: it's needed when cleaning stuff later on
590 LATE_DIST_CLEAN_FILES += mk/config.mk mk/are-validating.mk
591
592 # VERSION is shipped in a source dist
593 MAINTAINER_CLEAN_FILES += VERSION
594
595 extraclean::
596 $(RM) -rf autom4te.cache
597
598 clean distclean ::
599 $(RM) -rf inplace-datadir
600
601 clean distclean ::
602 $(MAKE) -C bindisttest $@
603 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
604
605 # -----------------------------------------------------------------------------
606
607 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
608 NO_BOOT_TARGET=YES
609 NO_ALL_TARGET=YES
610 NO_INSTALL_TARGET=YES
611
612 include $(TOP)/mk/target.mk
613
614 # -----------------------------------------------------------------------------
615