2ab85ec33a2783fe37623252cc6634f8363d2d1c
[ghc.git] / ghc.mk
1
2 # -----------------------------------------------------------------------------
3 #
4 # (c) 2009 The University of Glasgow
5 #
6 # This file is part of the GHC build system.
7 #
8 # To understand how the build system works and how to modify it, see
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
10 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 #
12 # -----------------------------------------------------------------------------
13
14 # ToDo List.
15 #
16 # * remove old Makefiles, add new stubs for building in subdirs
17 # * docs/Makefile
18 # * docs/docbook-cheat-sheet/Makefile
19 # * docs/ext-core/Makefile
20 # * docs/man/Makefile
21 # * docs/storage-mgmt/Makefile
22 # * docs/vh/Makefile
23 # * rts/dotnet/Makefile
24 # * utils/Makefile
25 # * add Makefiles for the rest of the utils/ programs that aren't built
26 # by default (need to exclude them from 'make all' too)
27
28 # Possible cleanups:
29 #
30 # * per-source-file dependencies instead of one .depend file?
31 # * eliminate undefined variables, and use --warn-undefined-variables?
32 # * put outputs from different ways in different subdirs of distdir/build,
33 # then we don't have to use -osuf/-hisuf. We would have to install
34 # them in different places too, so we'd need ghc-pkg support for packages
35 # of different ways.
36 # * make PACKAGES_STAGE1 generated by './configure' or './boot'?
37 # * we should use a directory of package.conf files rather than a single
38 # file for the inplace package database, so that we can express
39 # dependencies more accurately. Otherwise it's possible to get into
40 # a state where the package database is out of date, and the build
41 # system doesn't know.
42
43 # Approximate build order.
44 #
45 # The actual build order is defined by dependencies, and the phase
46 # ordering used to ensure correct ordering of makefile-generation; see
47 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
48 #
49 # * With bootstrapping compiler:
50 # o Build utils/ghc-cabal
51 # o Build utils/ghc-pkg
52 # o Build utils/hsc2hs
53 # * For each package:
54 # o configure, generate package-data.mk and inplace-pkg-info
55 # o register each package into inplace/lib/package.conf
56 # * build libffi
57 # * With bootstrapping compiler:
58 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
59 # o Build compiler (stage 1)
60 # * With stage 1:
61 # o Build libraries/*
62 # o Build rts
63 # o Build utils/* (except haddock)
64 # o Build compiler (stage 2)
65 # * With stage 2:
66 # o Build utils/haddock
67 # o Build compiler (stage 3) (optional)
68 # * With haddock:
69 # o libraries/*
70 # o compiler
71
72 .PHONY: default all haddock
73
74 # We need second expansion for the way we handle directories, so that
75 # | $$$$(dir $$$$@)/.
76 # expands to the directory of a rule that uses a % pattern.
77 .SECONDEXPANSION:
78
79 default : all
80
81 # Catch make if it runs away into an infinite loop
82 ifeq "$(MAKE_RESTARTS)" ""
83 else ifeq "$(MAKE_RESTARTS)" "1"
84 else
85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
86 endif
87
88 ifneq "$(CLEANING)" "YES"
89 CLEANING = NO
90 endif
91
92 # -----------------------------------------------------------------------------
93 # Misc GNU make utils
94
95 nothing=
96 space=$(nothing) $(nothing)
97 comma=,
98
99 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
100 # by default, because that disables all the implicit rules, but there doesn't
101 # seem to be a good way to do that. This turns off all the old-style suffix
102 # rules, which does half the job and speeds up make quite a bit:
103 .SUFFIXES:
104
105 # -----------------------------------------------------------------------------
106 # Makefile debugging
107 #
108 # to see the effective value used for a Makefile variable, do
109 # make show VALUE=MY_VALUE
110 #
111
112 show:
113 @echo '$(VALUE)="$($(VALUE))"'
114
115 # -----------------------------------------------------------------------------
116 # Include subsidiary build-system bits
117
118 include mk/tree.mk
119
120 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
121 include mk/config.mk
122 ifeq "$(ProjectVersion)" ""
123 $(error Please run ./configure first)
124 endif
125 endif
126
127 include mk/ways.mk
128
129 # (Optional) build-specific configuration
130 include mk/custom-settings.mk
131
132 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
133 ifeq "$(GhcLibWays)" ""
134 $(error $$(GhcLibWays) is empty, it must contain at least one way)
135 endif
136 endif
137
138 ifeq "$(phase)" ""
139 phase = final
140 endif
141
142 # -----------------------------------------------------------------------------
143 # Utility definitions
144
145 include rules/prof.mk
146 include rules/trace.mk
147 include rules/make-command.mk
148
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
151
152 include rules/all-target.mk
153 include rules/clean-target.mk
154
155 # -----------------------------------------------------------------------------
156 # The inplace tree
157
158 $(eval $(call clean-target,inplace,,inplace/bin inplace/lib))
159
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
162
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
165
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
169 endif
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
173 endif
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
177 endif
178
179 # -----------------------------------------------------------------------------
180 # Ways
181
182 include rules/way-prelims.mk
183
184 $(foreach way,$(ALL_WAYS),\
185 $(eval $(call way-prelims,$(way))))
186
187 # -----------------------------------------------------------------------------
188 # Compilation Flags
189
190 include rules/distdir-way-opts.mk
191
192 # -----------------------------------------------------------------------------
193 # Finding source files and object files
194
195 include rules/hs-sources.mk
196 include rules/c-sources.mk
197 include rules/includes-sources.mk
198 include rules/hs-objs.mk
199 include rules/c-objs.mk
200 include rules/cmm-objs.mk
201
202 # -----------------------------------------------------------------------------
203 # Suffix rules
204
205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
206 # so we don't make any when cleaning.
207 ifneq "$(CLEANING)" "YES"
208
209 include rules/hs-suffix-rules-srcdir.mk
210 include rules/hs-suffix-rules.mk
211 include rules/hi-rule.mk
212
213 $(foreach way,$(ALL_WAYS),\
214 $(eval $(call hi-rule,$(way))))
215
216 include rules/c-suffix-rules.mk
217 include rules/cmm-suffix-rules.mk
218
219 endif # CLEANING=YES
220
221 # -----------------------------------------------------------------------------
222 # Building package-data.mk files from .cabal files
223
224 include rules/package-config.mk
225
226 # -----------------------------------------------------------------------------
227 # Building dependencies
228
229 include rules/dependencies.mk
230 include rules/build-dependencies.mk
231 include rules/include-dependencies.mk
232
233 # -----------------------------------------------------------------------------
234 # Build package-data.mk files
235
236 include rules/build-package-data.mk
237
238 # -----------------------------------------------------------------------------
239 # Build and install a program
240
241 include rules/build-prog.mk
242 include rules/shell-wrapper.mk
243
244 # -----------------------------------------------------------------------------
245 # Build a perl script
246
247 include rules/build-perl.mk
248
249 # -----------------------------------------------------------------------------
250 # Build a package
251
252 include rules/build-package.mk
253 include rules/build-package-way.mk
254 include rules/haddock.mk
255 include rules/tags-package.mk
256 include rules/extra-packages.mk
257
258 # -----------------------------------------------------------------------------
259 # Registering hand-written package descriptions (used in rts)
260
261 include rules/manual-package-config.mk
262
263 # -----------------------------------------------------------------------------
264 # Docs
265
266 include rules/docbook.mk
267
268 # -----------------------------------------------------------------------------
269 # Making bindists
270
271 include rules/bindist.mk
272
273 # -----------------------------------------------------------------------------
274 # Directories
275
276 # Don't try to delete directories:
277 .PRECIOUS: %/.
278
279 # Create build directories on demand. NB. the | below: this indicates
280 # that $(MKDIRHIER) is an order-only dependency, which means that this
281 # rule fires after building mkdirhier, but we won't try to recreate
282 # directories if mkdirhier changes.
283 %/. : | $(MKDIRHIER)
284 "$(MKDIRHIER)" $@
285
286 # -----------------------------------------------------------------------------
287 # Lax dependencies
288
289 ifeq "$(LAX_DEPENDENCIES)" "YES"
290 LAX_DEPS_FOLLOW = |
291 else
292 LAX_DEPS_FOLLOW =
293 endif
294
295 # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up
296 # looking like
297 # target: a | b | c
298 # The first | signals the start of the order-only dependencies, but make
299 # treats the second | as a dependency. So we need to tell make how to
300 # build that dependency.
301
302 .PHONY: |
303 | :
304 @:
305
306 # -----------------------------------------------------------------------------
307 # Properties of packages
308
309 # These lists say "if this package is built, here's a property it has"
310 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
311
312 # Packages that are built but not installed
313 PKGS_THAT_ARE_INTREE_ONLY := haskeline mtl terminfo utf8-string xhtml
314
315 PKGS_THAT_ARE_DPH := \
316 dph/dph-base \
317 dph/dph-prim-interface dph/dph-prim-seq dph/dph-prim-par \
318 dph/dph-lifted-base \
319 dph/dph-lifted-boxed dph/dph-lifted-copy dph/dph-lifted-vseg \
320 vector primitive random
321
322 # Packages that, if present, must be built by the stage2 compiler,
323 # because they use TH and/or annotations, or depend on other stage2
324 # packages:
325 PKGS_THAT_BUILD_WITH_STAGE2 := $(PKGS_THAT_ARE_DPH) haskell98 haskell2010
326
327 # Packages that we shouldn't build if we don't have TH (e.g. because
328 # we're building a profiled compiler):
329 PKGS_THAT_USE_TH := $(PKGS_THAT_ARE_DPH)
330
331 # Packages that are built by stage0, in addition to stage1. These
332 # packages are dependencies of GHC, that we do not assume the stage0
333 # compiler already has installed (or up-to-date enough).
334 #
335 # We assume that the stage0 compiler has a suitable bytestring package,
336 # so we don't have to include it below.
337 PKGS_THAT_BUILD_WITH_STAGE0 = Cabal/Cabal hpc extensible-exceptions binary bin-package-db hoopl
338
339 # $(EXTRA_PACKAGES) is another classification, of packages built but
340 # not installed
341 # It is set in rules/extra-package.mk,
342 # by $(call extra-packages) a little further down
343 # this ghc.mk
344
345
346
347 # ----------------------------------------------------------------------------
348 # Packages to build
349 # The lists of packages that we *actually* going to build in each stage:
350 #
351 # $(PACKAGES_STAGE0)
352 # $(PACKAGES_STAGE1)
353 # $(PACKAGES_STAGE2)
354 #
355 # These are automatically derived from
356 # (a) the set of packages in this source tree
357 # (b) the predicates above, e.g. $(PKGS_THAT_BUILD_WITH_STAGE2)
358 # (c) which platform we're on, and a few other things
359
360
361 # no processing to do on this one: it really is the list of packages
362 # to build with stage 0.
363 PACKAGES_STAGE0 = $(PKGS_THAT_BUILD_WITH_STAGE0)
364
365 define addPackageGeneral
366 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
367 ifeq "$3" ""
368 $1 += $2
369 else
370 ifeq "$$(CLEANING)" "YES"
371 $1 += $2
372 else
373 ifeq $3
374 $1 += $2
375 endif
376 endif
377 endif
378 endef
379
380 define addPackage # args: $1 = package, $2 = condition
381 ifneq "$(filter $1,$(PKGS_THAT_USE_TH)) $(GhcProfiled)" "$1 YES"
382 ifeq "$(filter $1,$(PKGS_THAT_BUILD_WITH_STAGE2))" "$1"
383 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
384 else
385 $(call addPackageGeneral,PACKAGES_STAGE1,$1,$2)
386 endif
387 endif
388 endef
389
390 $(eval $(call addPackage,ghc-prim))
391 ifeq "$(CLEANING)" "YES"
392 $(eval $(call addPackage,integer-gmp))
393 $(eval $(call addPackage,integer-simple))
394 else
395 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
396 endif
397 $(eval $(call addPackage,base))
398 $(eval $(call addPackage,filepath))
399 $(eval $(call addPackage,array))
400 $(eval $(call addPackage,bytestring))
401 $(eval $(call addPackage,deepseq))
402 $(eval $(call addPackage,containers))
403
404 $(eval $(call addPackage,Win32,($$(Windows),YES)))
405 $(eval $(call addPackage,unix,($$(Windows),NO)))
406
407 $(eval $(call addPackage,old-locale))
408 $(eval $(call addPackage,old-time))
409 $(eval $(call addPackage,time))
410 $(eval $(call addPackage,directory))
411 $(eval $(call addPackage,process))
412 $(eval $(call addPackage,extensible-exceptions))
413 $(eval $(call addPackage,haskell98))
414 $(eval $(call addPackage,haskell2010))
415 $(eval $(call addPackage,hpc))
416 $(eval $(call addPackage,pretty))
417 $(eval $(call addPackage,template-haskell))
418 $(eval $(call addPackage,Cabal/Cabal))
419 $(eval $(call addPackage,binary))
420 $(eval $(call addPackage,bin-package-db))
421 $(eval $(call addPackage,hoopl))
422 $(eval $(call addPackage,mtl))
423 $(eval $(call addPackage,utf8-string))
424 $(eval $(call addPackage,xhtml))
425 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
426 $(eval $(call addPackage,haskeline))
427
428 $(eval $(call extra-packages))
429
430 # -------------------------------------------
431 # Dependencies between package-data.mk files
432
433 # We cannot run ghc-cabal to configure a package until we have
434 # configured and registered all of its dependencies. So the following
435 # hack forces all the configure steps to happen in exactly the following order:
436 #
437 # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2)
438 #
439 # Ideally we should use the correct dependencies here to allow more
440 # parallelism, but we don't know the dependencies until we've
441 # generated the pacakge-data.mk files.
442 define fixed_pkg_dep
443 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
444 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
445 endef
446
447 ifneq "$(BINDIST)" "YES"
448 fixed_pkg_prev=
449 $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
450
451 # the GHC package doesn't live in libraries/, so we add its dependency manually:
452 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
453 fixed_pkg_prev:=compiler/stage2/package-data.mk
454
455 # and continue with PACKAGES_STAGE2, which depend on GHC:
456 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
457
458 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
459 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
460 # haddock depends on ghc and some libraries, but depending on GHC's
461 # package-data.mk is sufficient, as that in turn depends on all the
462 # libraries
463 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
464 utils/ghc-pwd/dist-install/package-data.mk: compiler/stage2/package-data.mk
465 utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
466
467 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
468 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
469 utils/compare_sizes/dist-install/package-data.mk: compiler/stage2/package-data.mk
470 utils/runghc/dist-install/package-data.mk: compiler/stage2/package-data.mk
471
472 # add the final package.conf dependency: ghc-prim depends on RTS
473 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
474 endif
475
476 # --------------------------------
477 # Misc package-related settings
478
479 BOOT_PKG_CONSTRAINTS := \
480 $(foreach d,$(PACKAGES_STAGE0),\
481 $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\
482 --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")"))
483
484 # The actual .a and .so/.dll files: needed for dependencies.
485 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_v_LIB))
486 ifeq "$(BuildSharedLibs)" "YES"
487 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB))
488 endif
489 BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB))
490
491 # ----------------------------------------
492 # Special magic for the ghc-prim package
493
494 # We want the ghc-prim package to include the GHC.Prim module when it
495 # is registered, but not when it is built, because GHC.Prim is not a
496 # real source module, it is built-in to GHC. The old build system did
497 # this using Setup.hs, but we can't do that here, so we have a flag to
498 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
499 # remains compatible with the old build system for the time being).
500 # GHC.Prim module in the ghc-prim package with a flag:
501 #
502 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
503
504 # And then we strip it out again before building the package:
505 define libraries/ghc-prim_PACKAGE_MAGIC
506 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
507 endef
508
509 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
510
511 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
512 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
513
514 # Required so that Haddock documents the primops.
515 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
516
517 # ----------------------------------------
518 # Special magic for the integer package
519
520 ifneq "$(CLEANING)" "YES"
521 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
522 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
523 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
524 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
525 else
526 $(error Unknown integer library: $(INTEGER_LIBRARY))
527 endif
528 endif
529
530 # ----------------------------------------------
531 # Checking packages with 'cabal check'
532
533 ifeq "$(phase)" "final"
534 ifeq "$(CHECK_PACKAGES)" "YES"
535 all: check_packages
536 endif
537 endif
538
539 # These packages don't pass the Cabal checks because hs-source-dirs
540 # points outside the source directory. This isn't a real problem in
541 # these cases, so we just skip checking them.
542 # NB. these must come before we include the ghc.mk files below, because
543 # they disable the relevant rules.
544 # In compiler's case, include-dirs points outside of the source tree
545 CHECKED_compiler = YES
546
547 # -----------------------------------------------------------------------------
548 # Include build instructions from all subdirs
549
550 ifneq "$(BINDIST)" "YES"
551 BUILD_DIRS += \
552 $(GHC_MKDIRHIER_DIR)
553 endif
554
555 ifeq "$(Windows)" "YES"
556 BUILD_DIRS += \
557 $(GHC_TOUCHY_DIR)
558 endif
559
560 BUILD_DIRS += \
561 docs/users_guide \
562 docs/ext-core \
563 docs/man \
564 $(GHC_UNLIT_DIR) \
565 $(GHC_HP2PS_DIR)
566
567 ifneq "$(GhcUnregisterised)" "YES"
568 BUILD_DIRS += \
569 $(GHC_SPLIT_DIR)
570 endif
571
572 ifneq "$(BINDIST)" "YES"
573 BUILD_DIRS += \
574 $(GHC_GENPRIMOP_DIR)
575 endif
576
577 BUILD_DIRS += \
578 driver \
579 driver/ghci \
580 driver/ghc \
581 driver/haddock \
582 libffi \
583 includes \
584 rts
585
586 ifneq "$(BINDIST)" "YES"
587 BUILD_DIRS += \
588 bindisttest \
589 $(GHC_GENAPPLY_DIR)
590 endif
591
592 ifneq "$(CLEANING)" "YES"
593 BUILD_DIRS += \
594 $(patsubst %, libraries/%, $(PACKAGES_STAGE1))
595 endif
596
597 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
598 BUILD_DIRS += libraries/integer-gmp/gmp
599 else ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
600 BUILD_DIRS += libraries/integer-gmp/gmp
601 endif
602
603 BUILD_DIRS += \
604 utils/haddock \
605 utils/haddock/doc \
606 compiler \
607 $(GHC_HSC2HS_DIR) \
608 $(GHC_PKG_DIR) \
609 utils/testremove \
610 utils/ghctags \
611 utils/ghc-pwd \
612 $(GHC_CABAL_DIR) \
613 utils/hpc \
614 utils/runghc \
615 ghc
616
617 ifneq "$(BINDIST)" "YES"
618 BUILD_DIRS += \
619 utils/mkUserGuidePart
620 endif
621
622 BUILD_DIRS += utils/count_lines
623 BUILD_DIRS += utils/compare_sizes
624
625 ifneq "$(CLEANING)" "YES"
626 # After compiler/, because these packages depend on it
627 BUILD_DIRS += \
628 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
629 endif
630
631 # ----------------------------------------------
632 # Actually include all the sub-ghc.mk's
633
634 # BUILD_DIRS_EXTRA needs to come after BUILD_DIRS, because stuff in
635 # libraries/dph/ghc.mk refers to stuff defined earlier, in particular
636 # things like $(libraries/dph/dph-base_dist-install_GHCI_LIB)
637 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS) $(BUILD_DIRS_EXTRA))
638
639 # A useful pseudo-target (must be after the include above, because it needs
640 # the value of things like $(libraries/base_dist-install_v_LIB).
641 .PHONY: stage1_libs
642 stage1_libs : $(ALL_STAGE1_LIBS)
643
644 # ----------------------------------------------
645 # Per-package compiler flags
646 #
647 # If you want to add per-package compiler flags, this
648 # is the place to do it. Do it like this for package <pkg>
649 #
650 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
651 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
652
653 # Add $(GhcLibHcOpts) to all package builds
654 $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
655
656 # Add $(GhcBootLibHcOpts) to all stage0 package builds
657 $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
658
659 # -----------------------------------------------
660 # Haddock-related bits
661
662 # Don't run Haddock for the package that will not be installed
663 $(foreach p,$(PKGS_THAT_ARE_INTREE_ONLY),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
664 # We don't haddock the bootstrapping libraries
665 $(foreach p,$(PACKAGES_STAGE0),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
666
667 # Build the Haddock contents and index
668 ifeq "$(HADDOCK_DOCS)" "YES"
669 libraries/dist-haddock/index.html: inplace/bin/haddock$(exeext) $(ALL_HADDOCK_FILES)
670 cd libraries && sh gen_contents_index --inplace
671 ifeq "$(phase)" "final"
672 $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html))
673 endif
674 INSTALL_LIBRARY_DOCS += libraries/dist-haddock/*
675 endif
676
677 # -----------------------------------------------------------------------------
678 # Bootstrapping libraries
679
680 # We need to build a few libraries with the installed GHC, since GHC itself
681 # and some of the tools depend on them:
682
683 ifneq "$(BINDIST)" "YES"
684
685 ifneq "$(BOOTSTRAPPING_CONF)" ""
686 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
687 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
688 endif
689 endif
690
691 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
692
693 # register the boot packages in strict sequence, because running
694 # multiple ghc-pkgs in parallel doesn't work (registrations may get
695 # lost).
696 fixed_pkg_prev=
697 $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
698
699 compiler/stage1/package-data.mk : $(fixed_pkg_prev)
700 endif
701
702 ifneq "$(BINDIST)" "YES"
703 # Make sure we have all the GHCi libs by the time we've built
704 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
705 # GHCI libs, and we don't have a better way to express that dependency.
706 #
707 GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
708 $(compiler_stage2_GHCI_LIB)
709
710 ifeq "$(UseArchivesForGhci)" "NO"
711 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
712 endif
713
714 ifeq "$(UseArchivesForGhci)" "YES"
715 GHCI_lib_way = v
716 else
717 GHCI_lib_way = GHCI
718 endif
719
720 # Deps for TH uses in libraries
721 $(foreach way, $(GhcLibWays),$(eval \
722 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
723 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
724 ))
725 endif
726
727 # -----------------------------------------------------------------------------
728 # Creating a local mingw copy on Windows
729
730 ifeq "$(Windows)" "YES"
731
732 install : install_mingw
733 .PHONY: install_mingw
734 install_mingw : $(INPLACE_MINGW)
735 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
736
737 install : install_perl
738 .PHONY: install_perl
739 install_perl : $(INPLACE_PERL)
740 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
741
742 endif # Windows
743
744 ifneq "$(BINDIST)" "YES"
745 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
746 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
747 endif # BINDIST
748
749 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
750 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
751 | $$(dir $$@)/.
752 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
753
754 .PHONY: tags
755 tags: tags_compiler
756
757 .PHONY: TAGS
758 TAGS: TAGS_compiler
759
760 # -----------------------------------------------------------------------------
761 # Installation
762
763 install: install_libs install_packages install_libexecs \
764 install_libexec_scripts install_bins install_topdirs
765 ifeq "$(HADDOCK_DOCS)" "YES"
766 install: install_docs
767 endif
768
769 install_bins: $(INSTALL_BINS)
770 $(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
771 for i in $(INSTALL_BINS); do \
772 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ; \
773 done
774
775 install_libs: $(INSTALL_LIBS)
776 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibdir)")
777 for i in $(INSTALL_LIBS); do \
778 case $$i in \
779 *.a) \
780 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
781 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
782 *.dll) \
783 $(call INSTALL_DATA,-s $(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
784 *.so) \
785 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
786 *.dylib) \
787 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)");; \
788 *) \
789 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
790 esac; \
791 done
792
793 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
794 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
795 @:
796 else
797 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
798 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
799 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
800 done
801 endif
802
803 install_libexecs: $(INSTALL_LIBEXECS)
804 ifeq "$(INSTALL_LIBEXECS)" ""
805 @:
806 else
807 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
808 for i in $(INSTALL_LIBEXECS); do \
809 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
810 done
811 # We rename ghc-stage2, so that the right program name is used in error
812 # messages etc.
813 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
814 endif
815
816 install_topdirs: $(INSTALL_TOPDIRS)
817 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
818 for i in $(INSTALL_TOPDIRS); do \
819 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
820 done
821
822 install_docs: $(INSTALL_DOCS)
823 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
824 ifneq "$(INSTALL_DOCS)" ""
825 for i in $(INSTALL_DOCS); do \
826 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
827 done
828 endif
829 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
830 $(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
831 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
832 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
833 for i in $(INSTALL_LIBRARY_DOCS); do \
834 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
835 done
836 $(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
837 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
838 endif
839 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
840 for i in $(INSTALL_HTML_DOC_DIRS); do \
841 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
842 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
843 done
844 endif
845
846 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
847
848 # Install packages in the right order, so that ghc-pkg doesn't complain.
849 # Also, install ghc-pkg first.
850 ifeq "$(Windows)" "NO"
851 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
852 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
853 else
854 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
855 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
856 endif
857
858 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES_STAGE1)) \
859 compiler \
860 $(addprefix libraries/,$(PACKAGES_STAGE2))
861 ifeq "$(InstallExtraPackages)" "NO"
862 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
863 $(INSTALLED_PKG_DIRS))
864 endif
865 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(PKGS_THAT_ARE_INTREE_ONLY)),\
866 $(INSTALLED_PKG_DIRS))
867
868 # Set the INSTALL_DISTDIR_p for each package; compiler is special
869 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
870 $(eval INSTALL_DISTDIR_$p = dist-install))
871 INSTALL_DISTDIR_compiler = stage2
872
873 # Now we can do the installation
874 install_packages: install_libexecs
875 install_packages: rts/package.conf.install
876 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
877 $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)")
878 $(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
879 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
880 $(foreach p, $(INSTALLED_PKG_DIRS), \
881 $(call make-command, \
882 "$(GHC_CABAL_INPLACE)" install \
883 "$(INSTALLED_GHC_REAL)" \
884 "$(INSTALLED_GHC_PKG_REAL)" \
885 "$(STRIP_CMD)" \
886 "$(DESTDIR)$(topdir)" \
887 $p $(INSTALL_DISTDIR_$p) \
888 '$(DESTDIR)' \
889 '$(prefix)' \
890 '$(ghclibdir)' \
891 '$(docdir)/html/libraries' \
892 $(RelocatableBuild)))
893 # when we install the packages above, ghc-pkg obeys umask when creating
894 # the package.conf files, but for everything else we specify the
895 # permissions. We therefore now fix the permissions of package.cache.
896 # This means "sudo make install" does the right thing even if it runs
897 # with an 077 umask.
898 for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done
899
900 # -----------------------------------------------------------------------------
901 # Binary distributions
902
903 ifneq "$(CLEANING)" "YES"
904 # This rule seems to hold some files open on Windows which prevents
905 # cleaning, perhaps due to the $(wildcard).
906
907 $(eval $(call bindist,.,\
908 LICENSE \
909 README \
910 INSTALL \
911 configure config.sub config.guess install-sh \
912 settings.in \
913 packages \
914 Makefile \
915 mk/config.mk.in \
916 $(INPLACE_BIN)/mkdirhier \
917 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
918 utils/ghc-pwd/dist-install/build/tmp/ghc-pwd \
919 $(BINDIST_WRAPPERS) \
920 $(BINDIST_PERL_SOURCES) \
921 $(BINDIST_LIBS) \
922 $(BINDIST_HI) \
923 $(BINDIST_EXTRAS) \
924 $(includes_H_FILES) \
925 $(includes_DERIVEDCONSTANTS) \
926 $(includes_GHCCONSTANTS) \
927 $(libffi_HEADERS) \
928 $(INSTALL_LIBEXECS) \
929 $(INSTALL_LIBEXEC_SCRIPTS) \
930 $(INSTALL_TOPDIRS) \
931 $(INSTALL_BINS) \
932 $(INSTALL_MANPAGES) \
933 $(INSTALL_DOCS) \
934 $(INSTALL_LIBRARY_DOCS) \
935 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
936 docs/index.html \
937 compiler/stage2/doc \
938 $(wildcard libraries/*/dist-install/doc/) \
939 $(wildcard libraries/*/*/dist-install/doc/) \
940 $(filter-out settings,$(INSTALL_LIBS)) \
941 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
942 mk/project.mk \
943 mk/install.mk.in \
944 bindist.mk \
945 libraries/gen_contents_index \
946 libraries/prologue.txt \
947 $(wildcard libraries/dph/LICENSE \
948 libraries/dph/ghc-packages \
949 libraries/dph/ghc-packages2 \
950 libraries/dph/ghc-stage2-package) \
951 ))
952 endif
953 # mk/project.mk gets an absolute path, so we manually include it in
954 # the bindist with a relative path
955
956 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
957
958 unix-binary-dist-prep:
959 $(call removeTrees,bindistprep/)
960 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
961 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
962 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
963 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
964 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
965 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
966 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
967 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
968 echo "GHC_CABAL_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal" >> $(BIN_DIST_MK)
969 cd $(BIN_DIST_PREP_DIR) && autoreconf
970 $(call removeFiles,$(BIN_DIST_PREP_TAR))
971 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
972 # tree then we want to include the real file, not a symlink to it
973 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
974
975 windows-binary-dist-prep:
976 $(call removeTrees,bindistprep/)
977 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
978 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
979
980 windows-installer:
981 ifeq "$(ISCC_CMD)" ""
982 @echo No ISCC_CMD, so not making installer
983 else
984 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
985 endif
986
987 # tryTimes tries to run its third argument multiple times, until it
988 # succeeds. Don't call it directly; call try10Times instead.
989 # The first and second argument to tryTimes are lists of values.
990 # The length of the first argument is the number of times we have
991 # already tried. The length of the second argument is the number more
992 # times we will try.
993 tryTimes = $(if $2, \
994 { echo 'Try $(words x $1): $3' ; $3 ; } || \
995 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
996 )
997
998 # Try to run the argument 10 times. If all 10 fail, fail.
999 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1000
1001 .PHONY: publish-binary-dist
1002 publish-binary-dist:
1003 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1004 ifeq "$(mingw32_TARGET_OS)" "1"
1005 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1006 endif
1007
1008 ifeq "$(mingw32_TARGET_OS)" "1"
1009 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/doc
1010 else
1011 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/share/doc/ghc
1012 endif
1013
1014 .PHONY: publish-docs
1015 publish-docs:
1016 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1017
1018 # -----------------------------------------------------------------------------
1019 # Source distributions
1020
1021 # Do it like this:
1022 #
1023 # $ make
1024 # $ make sdist
1025 #
1026
1027 # A source dist is built from a complete build tree, because we
1028 # require some extra files not contained in a darcs checkout: the
1029 # output from Happy and Alex, for example.
1030 #
1031 # The steps performed by 'make dist' are as follows:
1032 # - create a complete link-tree of the current build tree in /tmp
1033 # - run 'make distclean' on that tree
1034 # - remove a bunch of other files that we know shouldn't be in the dist
1035 # - tar up first the extralibs package, then the main source package
1036
1037 #
1038 # Directory in which we're going to build the src dist
1039 #
1040 SRC_DIST_ROOT = sdistprep
1041 SRC_DIST_BASE_NAME = ghc-$(ProjectVersion)
1042
1043 SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src
1044 SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc
1045 SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME)
1046 SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.bz2
1047
1048 SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite
1049 SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc
1050 SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME)
1051 SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.bz2
1052
1053 #
1054 # Files to include in source distributions
1055 #
1056 SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \
1057 utils docs rts compiler ghc driver libraries ghc-tarballs
1058 SRC_DIST_GHC_FILES += \
1059 configure.ac config.guess config.sub configure \
1060 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1061 ghc.spec.in ghc.spec settings.in VERSION \
1062 boot boot-pkgs packages ghc.mk
1063
1064 VERSION :
1065 echo $(ProjectVersion) >VERSION
1066
1067 sdist : VERSION
1068
1069 # Use:
1070 # $(call sdist_ghc_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1071 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1072 # "stage2" is the dist dir.
1073 define sdist_ghc_file
1074 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_GHC_DIR)/$1/$3/$4
1075 mv $(SRC_DIST_GHC_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_GHC_DIR)/$1/$3/$4/$5.$6.source
1076 endef
1077
1078 .PHONY: sdist-ghc-prep
1079 sdist-ghc-prep :
1080 $(call removeTrees,$(SRC_DIST_GHC_ROOT))
1081 $(call removeFiles,$(SRC_DIST_GHC_TARBALL))
1082 -mkdir $(SRC_DIST_ROOT)
1083 mkdir $(SRC_DIST_GHC_ROOT)
1084 mkdir $(SRC_DIST_GHC_DIR)
1085 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1086 cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done
1087 cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean
1088 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/)
1089 $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/)
1090 $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123])
1091 $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk)
1092 $(call sdist_ghc_file,compiler,stage2,cmm,,CmmLex,x)
1093 $(call sdist_ghc_file,compiler,stage2,cmm,,CmmParse,y)
1094 $(call sdist_ghc_file,compiler,stage2,parser,,Lexer,x)
1095 $(call sdist_ghc_file,compiler,stage2,parser,,Parser,y.pp)
1096 $(call sdist_ghc_file,compiler,stage2,parser,,ParserCore,y)
1097 $(call sdist_ghc_file,utils/hpc,dist-install,,,HpcParser,y)
1098 $(call sdist_ghc_file,utils/genprimopcode,dist,,,Lexer,x)
1099 $(call sdist_ghc_file,utils/genprimopcode,dist,,,Parser,y)
1100 $(call sdist_ghc_file,utils/haddock,dist,src,Haddock,Lex,x)
1101 $(call sdist_ghc_file,utils/haddock,dist,src,Haddock,Parse,y)
1102 cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1103
1104 .PHONY: sdist-testsuite-prep
1105 sdist-testsuite-prep :
1106 $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT))
1107 $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL))
1108 -mkdir $(SRC_DIST_ROOT)
1109 mkdir $(SRC_DIST_TESTSUITE_ROOT)
1110 mkdir $(SRC_DIST_TESTSUITE_DIR)
1111 mkdir $(SRC_DIST_TESTSUITE_DIR)/testsuite
1112 cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite
1113 $(call removeTrees,$(SRC_DIST_TESTSUITE_DIR)/testsuite/.git)
1114
1115 .PHONY: sdist
1116 sdist : sdist-ghc-prep sdist-testsuite-prep
1117 cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | bzip2 > $(TOP)/$(SRC_DIST_GHC_TARBALL)
1118 cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | bzip2 > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL)
1119
1120 sdist-manifest : $(SRC_DIST_GHC_TARBALL)
1121 tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1122
1123 # Upload the distribution(s)
1124 # Retrying is to work around buggy firewalls that corrupt large file transfers
1125 # over SSH.
1126 ifneq "$(PublishLocation)" ""
1127 publish-sdist :
1128 $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist)
1129 $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist)
1130 endif
1131
1132 ifeq "$(BootingFromHc)" "YES"
1133 # In a normal build we use GHC to compile C files (see
1134 # rules/c-suffix-rules.mk), which passes a number of its own options
1135 # to the C compiler. So when bootstrapping we have to provide these
1136 # flags explicitly to C compilations.
1137 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1138 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1139 SRC_CC_OPTS += $(addprefix -I,$(GHC_INCLUDE_DIRS))
1140 endif
1141
1142 # -----------------------------------------------------------------------------
1143 # sdisting libraries
1144
1145 # Use manually, with e.g.:
1146 # make sdist_directory
1147
1148 sdist_%:
1149 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1150
1151 # -----------------------------------------------------------------------------
1152 # Cleaning
1153
1154 .PHONY: clean
1155
1156 CLEAN_FILES += libraries/bootstrapping.conf
1157 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1158 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1159
1160 # These four are no longer generated, but we still clean them for a while
1161 # as they may still be in old GHC trees:
1162 CLEAN_FILES += includes/GHCConstants.h
1163 CLEAN_FILES += includes/DerivedConstants.h
1164 CLEAN_FILES += includes/ghcautoconf.h
1165 CLEAN_FILES += includes/ghcplatform.h
1166
1167 clean : clean_files clean_libraries
1168
1169 .PHONY: clean_files
1170 clean_files :
1171 $(call removeFiles,$(CLEAN_FILES))
1172
1173 .PHONY: clean_libraries
1174 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2))
1175 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0))
1176
1177 clean_libraries:
1178 $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1179 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1180 $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1181 $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1182 $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))))
1183
1184 # We have to define a clean target for each library manually, because the
1185 # libraries/*/ghc.mk files are not included when we're cleaning.
1186 ifeq "$(CLEANING)" "YES"
1187 $(foreach lib,$(PACKAGES_STAGE0),\
1188 $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot)))
1189 $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\
1190 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1191 endif
1192
1193 clean : clean_haddock_index
1194 .PHONY: clean_haddock_index
1195 clean_haddock_index:
1196 $(call removeTrees,libraries/dist-haddock)
1197
1198 clean : clean_bindistprep
1199 .PHONY: clean_bindistprep
1200 clean_bindistprep:
1201 $(call removeTrees,bindistprep/)
1202
1203 distclean : clean
1204 $(call removeFiles,config.cache config.status config.log mk/config.h mk/stamp-h)
1205 $(call removeFiles,mk/config.mk mk/are-validating.mk mk/project.mk)
1206 $(call removeFiles,mk/config.mk.old mk/project.mk.old)
1207 $(call removeFiles,settings docs/users_guide/ug-book.xml)
1208 $(call removeFiles,compiler/ghc.cabal compiler/ghc.cabal.old)
1209 $(call removeFiles,ghc/ghc-bin.cabal)
1210 $(call removeFiles,libraries/base/include/HsBaseConfig.h)
1211 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h)
1212 $(call removeFiles,libraries/process/include/HsProcessConfig.h)
1213 $(call removeFiles,libraries/unix/include/HsUnixConfig.h)
1214 $(call removeFiles,libraries/old-time/include/HsTimeConfig.h)
1215 $(call removeTrees,utils/ghc-pwd/dist)
1216 $(call removeTrees,inplace)
1217 $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1218
1219 maintainer-clean : distclean
1220 $(call removeFiles,configure mk/config.h.in)
1221 $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache))
1222 $(call removeFiles,ghc.spec)
1223 $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \
1224 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1225 $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1226 $(call removeFiles,$(patsubst %, libraries/%/configure, \
1227 $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))
1228 $(call removeFiles,libraries/base/include/HsBaseConfig.h.in)
1229 $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in)
1230 $(call removeFiles,libraries/process/include/HsProcessConfig.h.in)
1231 $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in)
1232 $(call removeFiles,libraries/old-time/include/HsTimeConfig.h.in)
1233
1234 .PHONY: all_libraries
1235
1236 .PHONY: bootstrapping-files
1237 bootstrapping-files: $(includes_H_CONFIG)
1238 bootstrapping-files: $(includes_DERIVEDCONSTANTS)
1239 bootstrapping-files: $(includes_GHCCONSTANTS)
1240 bootstrapping-files: $(libffi_HEADERS)
1241
1242 .DELETE_ON_ERROR:
1243
1244 # -----------------------------------------------------------------------------
1245 # Numbered phase targets
1246
1247 .PHONY: phase_0_builds
1248 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1249 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1250 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1251 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1252
1253 .PHONY: phase_1_builds
1254 phase_1_builds: $(PACKAGE_DATA_MKS)
1255